2. Q-tran
  3. DMX-US3 Controller for LED Lighting
DMX-US3 Controller for LED Lighting

Q-tran DMX-US3 Controller for LED Lighting, Q-TRAN DMX-US3 Controller for LED Lighting Installation guide

  • Hello, I'm your chat assistant. I have reviewed the user manual for the Q-Tran DMX-US3 touch panel. This document outlines the installation process, including mounting the device, making electrical connections, and connecting to DMX drivers. I'm ready to answer your questions about using this product.
  • What is the first step of installation?
    How to pry baseplate?
    What is DMX GND connection purpose?
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-07-28-22
INSTALLATION Accessories - DMX-US3
Install the junction box into the wall.
Screw the baseplate to the junction box in the wall firmly.
Snap the upper portion of the touch panel into the
baseplate and then snap the bottom into place.
Connect all components and put the power
adapter into the junction box. Connect DMX GND
to earth GND.
Use a flathead screwdriver to pry the baseplate
as shown:
1
3
5
4
2
Power Adapter
Power Input 24VDC
DMX Signal Output
DC-
N L
100-240VAC
50/60Hz
DC+ DMX- DMX+ DMX
GND
To DMX Drivers
AC/DC Adapter
Slot
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-07-28-22
INSTALLATION Accessories - DMX-US3
Connect to power supply.
6
DMX DRIVER
QTM-eLED+DMX
DMX DRIVER
QTM-eLED+DMX
Zone 1 - Address 1
Zone 2 - Address 5
DMX DRIVER
QTM-eLED+DMX
Zone 3 - Address 9
DMX IN
DMX IN
DMX IN
DMX OUT
DMX OUT
/