1of3
LightSourceToolsRequired
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
1BULBREQUIRED
BULBNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Package Contents
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1
Table of
Contents
E
Crossbar
Assembly
x1
A
PARTS BAG
Outlet Box Screw
x2
C
Wire Connector
x3
D
Mounting Screw
x2
B
Crossbar Assembly Wiring
STEP 1 STEP 2
Fixture Body
STEP 3
Bulb
STEP 4 STEP 5
Caulk
Exterior Caulk
Installation Instructions: UQL1671
www.urbanambiance.com
2of3
STEP 1
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 2
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 3 1
Remove papers
inside of the cage
Install fixture body
2
Remove
Papers
www.urbanambiance.com
3of3
STEP 4
STEP 5
Exterior Caulk
www.urbanambiance.com
/
