urban ambiance UQL3971 Installation guide

Type
Installation guide
1of2
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
D
Crossbar Assembly Wiring Bulb
Table of
Contents
STEP 2 STEP 3 STEP 5
STEP 1
Ceiling Canopy
STEP 4
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
ToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Outlet Box Screw
x2
B
Wire Connector
x3
C
Socket Assembly
x1
LightSource
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
3BULBSREQUIRED
BULBNOTINCLUDED
ERing
x1
FShade
x1
GLock Screw
x3
STEP 1
Socket Assembly
Installation Instructions: UQL3971
www.urbanambiance.com
2of2
STEP 5
STEP 4
STEP 3
*Green Ground Screw on
crossbar optional
White wire (neutral)
from outlet box White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 2 1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to
mounting screws
www.urbanambiance.com
  • Page 1 1
  • Page 2 2

urban ambiance UQL3971 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI