1of4
LightSourceToolsRequired
3BULBSREQUIRED
BULBSNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Package Contents
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1
Table of
Contents
E
Crossbar
Assembly
x1
A
PARTS BAG
Outlet Box Screw
x2
C
Wire Connector
x3
D
Mounting Screw
x2
B
Exterior Caulk
Crossbar Assembly Wiring
STEP 2 STEP 3
Fixture Body
STEP 4
Bulb
STEP 5 STEP 6
Caulk
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
Glass Panel
x4
F
Glass Panel
STEP 1
Installation Instructions: UQL1673
www.urbanambiance.com
2of4
STEP 1
1
Remove cage
4
Install cage
STEP 2
Remove Tabs
2 3
Install glass panels
www.urbanambiance.com
3of4
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 3
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 4
STEP 5
www.urbanambiance.com
4of4
STEP 6
Exterior Caulk
www.urbanambiance.com
/
