2. urban ambiance
  3. UQL3120

urban ambiance UQL3120 Installation guide

  • Hello! I've reviewed the installation instructions for the urban ambiance UQL3120 light fixture. This document details the necessary tools, parts, and step-by-step procedures for installing the fixture. It specifies the need for four E26 medium base, type A bulbs, which are not included, and mentions important safety precautions. I'm ready to answer your questions regarding the installation process or any other aspect of the fixture.
  • What type of bulbs are required?
    Are the bulbs included?
    What should I do before starting the installation?
    What should I do if there are missing or damaged parts?
1of2
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
D
Crossbar Assembly Wiring Bulb
Table of
Contents
STEP 1 STEP 2 STEP 4
STEP 1 1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to
mounting screws
Ceiling Canopy
STEP 3
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
ToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Outlet Box Screw
x2
B
Wire Connector
x3
C
Fixture Body
x1
LightSource
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
4BULBSREQUIRED
BULBNOTINCLUDED
Installation Instructions: UQL3120
www.urbanambiance.com
2of2
STEP 4
STEP 3
STEP 2
*Green Ground Screw on
crossbar optional
White wire (neutral)
from outlet box White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
www.urbanambiance.com
/