urban ambiance UQL1634 Installation guide

Brand
urban ambiance
Model
UQL1634
Type
Installation guide
Exterior Caulk
1 of 4
Light SourceTools Required
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
150W
MAX
1 BULB REQUIRED
BULB NOT INCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Crossbar
Assembly
x 1
A
Package Contents
PARTS BAG
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x 1
E
Crossbar Assembly Glass Panel Wiring Bulb
Table of
Contents
STEP 2 STEP 3 STEP 4 STEP 6
Fixture Body
STEP 5
Caulk
STEP 7
Alternate
Mounting Screw
x 2
B
Alternate
Mounting Screw
STEP 1
Outlet Box Screw
x 2
C
Wire Connector
x 3
D
Glass Panel
x 4
F
Installation Instructions: UQL1634
www.urbanambiance.com
STEP 1
OPTION 1 OPTION 2
Included
(Pre-assembled)
Included
Standard
Mounting
Screw
Alternate
Mounting
Screw
skip to next page
1 2 3
Steps 1-3 to remove standard mounting screws
56
Steps 4-6 to reassemble with alternate mounting screws
4
2 of 4
STEP 2
1 2 3
Step 1
Install crossbar assembly
Step 2 - 3
Test fitting backplate to mounting screws
STEP 3
Slot
Tab
www.urbanambiance.com
3 of 4
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 4
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 5
STEP 6
www.urbanambiance.com
4 of 4
STEP 7
Exterior Caulk
www.urbanambiance.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

urban ambiance UQL1634 Installation guide

Brand
urban ambiance
Model
UQL1634
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents