2. ROSE DISPLAYS
  3. SUPERSNAP WITH WALL HANGERS

ROSE DISPLAYS SUPERSNAP WITH WALL HANGERS Instruction Sheet

  • Hello! I've reviewed the SuperSnap Instruction Sheet and I'm ready to assist you with any questions you might have about assembling your poster hanger. The document covers the steps to open, load a poster, add end caps, and mount the hanger to a wall, along with using Molly Anchors for drywall.
  • What is the recommended method for opening and closing the SuperSnap?
    What type of screws are used to install the wall mounting hangers?
    What is recommended for drywall installations?
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Parts
SuperSnap™ Instruction Sheet
Instructions for assembly
Incept-7.05.02
The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSSuperSnapWallHangers
Figure 4
Figure 2 Figure 3
Figure 1
Step 1
Snap the SuperSnap open and insert
poster (top and bottom). Fig. 1
Note: It is easier to open and close
the SuperSnap by starting at one end
and working your way down the
holder.
Step 2
To close, snap the SuperSnap shut.
Fig. 2
Step 3
Push end caps into place. Fig 3
Step 4
Install Wall Mounting Hangers using
wood screws and a Phillips head
screwdriver. Make sure that the Wall
Mounting Hangers are level. Fig. 4
Note: The use of Molly Anchors are
recommended for drywall installations
(predrilling 3/16” holes is necessary).
Step 5
Suspend poster.
Important note:
Please save and reuse the SuperSnap,
End Caps, and Wall Mounting
Hangers for future projects.
SuperSnap
12S300
End Caps
06-5475
Wood Screws or
Molly Anchors
2010SC
16-0016
SuperSnap
Wall Mounting
Hangers
06-6067S
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Parts
SuperSnap™ Instruction Sheet
Instructions for assembly
Incept-7.05.02
The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSSuperSnapWallHangers
Figure 4
SuperSnap
12S300
End Caps
06-5475
Figure 2 Figure 3
Figure 1
Step 1
Snap the SuperSnap open and insert
poster (top and bottom). Fig. 1
Note: It is easier to open and close
the SuperSnap by starting at one end
and working your way down the
holder.
Step 2
To close, snap the SuperSnap shut.
Fig. 2
Step 3
Push end caps into place. Fig 3
Step 4
Install Wall Mounting Hangers using
wood screws and a Phillips head
screwdriver. Make sure that the Wall
Mounting Hangers are level. Fig. 4
Note: The use of Molly Anchors are
recommended for drywall installations
(predrilling 3/16” holes is necessary).
Step 5
Suspend poster.
Important note:
Please save and reuse the SuperSnap,
End Caps, and Wall Mounting
Hangers for future projects.
Wood Screws or
Molly Anchors
2010SC
16-0016
SuperSnap
Wall Mounting
Hangers
06-6067S
/