ROSE DISPLAYS ANOGOTCHA SQUARE WITH MULTICLIPS User manual

Brand: ROSE DISPLAYS

Model: ANOGOTCHA SQUARE WITH MULTICLIPS

Type: User manual

Parts

Step 1

Insert T-Top Gotcha Holder into AnoGotcha

Shell. Fig. 1

Step 2

Squeeze sides of MultiClip together. Fig. 2

Step 3

Align the bottom rail of the MultiClip with the

top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 3

Step 4

Push end caps into place. Fig. 4

Step 5

Snap the AnoGotcha Holder open and insert

poster (top and bottom). Insert graphic completely

into holder until edge of graphic meets top of

holder. To close, snap the AnoGotcha Holder

shut. Fig. 5

Note: It is easier to open and close the Gotcha by

starting at one end and working your way down the

holder. With large or curling graphics, it may be

easier to insert graphic at one end and slide into

holder from one end to another

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoGotcha Holder, End

Caps and MultiClips for future projects.

OneUp Instruction Sheet

AnoGotcha™

AnoGotcha Shell

12AG400SQ

Instructions for Hanging

Incept-7.31.02

AnoGotcha™ is a trademark and Gotcha® is a registered trademark of Rose

Displays, Ltd. Neither the manufacturer nor any sales agent may be held

liable for injury, loss or damage resulting from the use

of these products. Part #02INSAnoGotchaSQMC

Figure 1

Figure 3 Figure 4

Figure 5 Figure 6

End Caps

06-5545

MultiClip

1UP-0101

T-Top Gotcha

12GT100

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Figure 2

Parts

OneUp Instruction Sheet

AnoGotcha™

AnoGotcha Shell

12AG400SQ

Instructions for Hanging

Incept-7.31.02

AnoGotcha™ is a trademark and Gotcha® is a registered trademark of Rose

Displays, Ltd. Neither the manufacturer nor any sales agent may be held

liable for injury, loss or damage resulting from the use

of these products. Part #02INSAnoGotchaSQMC

Figure 1

Figure 3 Figure 4

Figure 5 Figure 6

End Caps

06-5545

MultiClip

1UP-0101

T-Top Gotcha

12GT100

Figure 2

Step 1

Insert T-Top Gotcha Holder into AnoGotcha

Shell. Fig. 1

Step 2

Squeeze sides of MultiClip together. Fig. 2

Step 3

Align the bottom rail of the MultiClip with the

top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 3

Step 4

Push end caps into place. Fig. 4

Step 5

Snap the AnoGotcha Holder open and insert

poster (top and bottom). Insert graphic completely

into holder until edge of graphic meets top of

holder. To close, snap the AnoGotcha Holder

shut. Fig. 5

Note: It is easier to open and close the Gotcha by

starting at one end and working your way down the

holder. With large or curling graphics, it may be

easier to insert graphic at one end and slide into

holder from one end to another

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoGotcha Holder, End

Caps and MultiClips for future projects.

Parts

Instruction Sheet

AnoGotcha™

AnoGotcha Shell

12AG400SQ

Instructions for Hanging

Incept-7.31.02

AnoGotcha™ is a trademark and Gotcha® is a registered trademark of Rose

Displays, Ltd. Neither the manufacturer nor any sales agent may be held

liable for injury, loss or damage resulting from the use

of these products. Part #02INSAnoGotchaSQMC

Figure 1

Figure 3 Figure 4

Figure 5 Figure 6

End Caps

06-5545

MultiClips

1UP-0101

T-Top Gotcha

12GT100

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Figure 2

Step 1

Insert T-Top Gotcha Holder into AnoGotcha

Shell. Fig. 1

Step 2

Squeeze sides of MultiClip together. Fig. 2

Step 3

Align the bottom rail of the MultiClip with the

top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 3 Repeat steps 2 and 3

for second MultiClip.

Step 4

Push end caps into place. Fig. 4

Step 5

Snap the AnoGotcha Holder open and insert

poster (top and bottom). Insert graphic completely

into holder until edge of graphic meets top of

holder. To close, snap the AnoGotcha Holder

shut. Fig. 5

Note: It is easier to open and close the Gotcha by

starting at one end and working your way down the

holder. With large or curling graphics, it may be

easier to insert graphic at one end and slide into

holder from one end to another

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoGotcha Holder, End

Caps and MultiClips for future projects.

Parts

Instruction Sheet

AnoGotcha™

AnoGotcha Shell

12AG400SQ

Instructions for Hanging

Incept-7.31.02

AnoGotcha™ is a trademark and Gotcha® is a registered trademark of Rose

Displays, Ltd. Neither the manufacturer nor any sales agent may be held

liable for injury, loss or damage resulting from the use

of these products. Part #02INSAnoGotchaSQMC

Figure 1

Figure 3 Figure 4

Figure 5 Figure 6

End Caps

06-5545

MultiClips

1UP-0101

T-Top Gotcha

12GT100

Figure 2

Step 1

Insert T-Top Gotcha Holder into AnoGotcha

Shell. Fig. 1

Step 2

Squeeze sides of MultiClip together. Fig. 2

Step 3

Align the bottom rail of the MultiClip with the

top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 3 Repeat steps 2 and 3

for second MultiClip.

Step 4

Push end caps into place. Fig. 4

Step 5

Snap the AnoGotcha Holder open and insert

poster (top and bottom). Insert graphic completely

into holder until edge of graphic meets top of

holder. To close, snap the AnoGotcha Holder

shut. Fig. 5

Note: It is easier to open and close the Gotcha by

starting at one end and working your way down the

holder. With large or curling graphics, it may be

easier to insert graphic at one end and slide into

holder from one end to another

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoGotcha Holder, End

Caps and MultiClips for future projects.

ROSE DISPLAYS ANOGOTCHA SQUARE WITH MULTICLIPS User manual

ROSE DISPLAYS ANOGOTCHA SQUARE WITH MULTICLIPS User manual

ROSE DISPLAYS ANOGOTCHA SQUARE WITH MULTICLIPS User manual

Related papers

Other documents