ROSE DISPLAYS GOTCHAClip FOR SLATWALL Instruction Sheet

Brand: ROSE DISPLAYS

Model: GOTCHAClip FOR SLATWALL

Type: Instruction Sheet

Parts

35 Congress Street, Salem MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #00INSGotcha/SWClip

Instructions For Hanging

Instruction Sheet

Incept-1.12.00

GotchaClip™ For Slatwall

Step 1

Place poster on a flat surface. Snap the Gotcha

Holder open and insert poster (top and bottom).

To close, snap the Gotcha Holder shut. Fig. 1

Note: It is easier to open and close the Gotcha

Holder by starting at one end and working your

way down the holder.

Step 2

Insert the GotchaClip for Slatwall into slot on the

back side of the top Gotcha Holder only. (You

should hear a “SNAP” when the clip is inserted

properly). Fig. 2

Step 3

Tilt holder and clip at a slight angle and slip the

GotchaClip for Slatwall hooks into the groove in

the slatwall. Fig. 3

Important note:

Please save and reuse the Gotcha Holder and the

GotchaClip for Slatwall for future projects.

Gotcha

12G100

GotchaClips

for Slatwall

Figure 1

Figure 2

Figure 3

Parts

Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #00INSGotcha/SWClip

Instructions For Hanging

Instruction Sheet

Incept-1.12.00

GotchaClip™ For Slatwall

Step 1

Place poster on a flat surface. Snap the Gotcha

Holder open and insert poster (top and bottom).

To close, snap the Gotcha Holder shut. Fig. 1

Note: It is easier to open and close the Gotcha

Holder by starting at one end and working your

way down the holder.

Step 2

Insert the GotchaClip for Slatwall into the slot on

the back side of the top Gotcha Holder only. (You

should hear a “SNAP” when the clip is inserted

properly). Fig. 2

Step 3

Tilt holder and clip at a slight angle and slip the

GotchaClip for Slatwall hooks into grooves in the

slatwall. Fig. 3

Important note:

Please save and reuse the Gotcha Holder and

GotchaClip for Slatwall for future projects.

Gotcha

12G100

GotchaClips

for Slatwall

Figure 1

Figure 2

Figure 3

ROSE DISPLAYS GOTCHAClip FOR SLATWALL Instruction Sheet

ROSE DISPLAYS GOTCHAClip FOR SLATWALL Instruction Sheet

ROSE DISPLAYS GOTCHAClip FOR SLATWALL Instruction Sheet

Related papers

Other documents