ROSE DISPLAYS QUICKGRIP Instruction Sheet

Brand: ROSE DISPLAYS

Model: QUICKGRIP

Type: Instruction Sheet

35 Congress Street, Salem, MA 01970

Tel# 1- 800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Instructions for Hanging

Instruction Sheet

Step 1

For use with poster paper or thinner substrates.

Score and fold or staple poster edge and slide

into the QuickGrip Holder. When using staples,

place staples 1/4” from top and bottom edges of

poster. Fig. 1

For use with thicker graphics up to 2mm.

Starting at one corner push the QuickGrip

Holder onto the graphic. Work your way down

the holder tapping it firmly down to seat the

graphic fully. Fig. 2

Step 2

Place cable into inner channel of CableClip.

The cable should snap into place. Fig. 3

Step 3

Align one end of the CableClip with the top

channel of the plastic holder. Then insert one

round end, press down on the other round end

and slide CableClip into rail. Fig. 4 Repeat step

3 for second CableClip.

Step 4

Push end caps into place. Fig. 5

Suspend poster. Fig. 6

Important note:

Please save and reuse the QuickGrip

Holder, End Caps and CableClips

for future projects.

End Caps

06-5525

QuickGrip™

Incept-11.13.02

The QuickGrip is a registered trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or damage

resulting from the use of these products. Part #02INSQuickGCCSaucer

QuickGrip

12-0500

Figure 6Figure 5

Figure 3 Figure 4

Figure 2

Figure 1

Cable Clips

06-5050

Cable and

Saucer

16-0018SS

35 Congress Street, Salem, MA 01970

Tel# 1- 800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Instructions for Hanging

Instruction Sheet

Step 1

For use with poster paper or thinner

substrates. Score and fold or staple poster

edge and slide into the QuickGrip Holder.

When using staples, place staples 1/4” from

top and bottom edges of poster. Fig. 1

For use with thicker graphics up to 2mm.

Starting at one corner push the QuickGrip

Holder onto the graphic. Work your way

down the holder tapping it firmly down to

seat the graphic fully. Fig. 2

Step 2

Place cable into inner channel of CableClip.

The cable should snap into place. Fig. 3

Step 3

Align one end of the CableClip with the

top channel of the plastic holder. Then

insert one round end, press down on

the other round end and slide CableClip

into rail. Fig. 4

Step 4

Push end caps into place. Fig. 5

Suspend poster. Fig. 6

Important note:

Please save and reuse the QuickGrip

Holder, End Caps and CableClips

for future projects.

End Caps

06-5525

QuickGrip™

Incept-11.13.02

The QuickGrip is a registered trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or damage

resulting from the use of these products. Part #02INSQuickGCCSaucer

QuickGrip

12-0500

Figure 6Figure 5

Figure 3 Figure 4

Figure 2

Figure 1

Cable Clip

06-5050

Cable and

Saucer

16-0018SS

Parts

Cable Clips

06-5050

Instructions for Hanging

Instruction Sheet

Step 1

For use with poster paper or thinner substrates.

Score and fold or staple poster edge and slide

into the QuickGrip Holder. When using staples,

place staples 1/4” from top and bottom edges of

poster. Fig. 1

For use with thicker graphics up to 2mm.

Starting at one corner push the QuickGrip

Holder onto the graphic. Work your way

down the holder tapping it firmly down

to seat the graphic fully. Fig. 2

Step 2

Place cable into inner channel of CableClip.

The cable should snap into place. Fig. 3

Step 3

Align one end of the CableClip with the top

channel of the plastic holder. Then insert one

round end, press down on the other round end

and slide CableClip into rail. Fig. 4 Repeat steps

3 for second CableClip.

Step 4

Push end caps into place. Fig. 5

Suspend poster. Fig. 6

Important note:

Please save and reuse the QuickGrip

Holder, End Caps and CableClips

for future projects.

End Caps

06-5525

QuickGrip™

Incept-11.13.02

The QuickGrip is a registered trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or damage

resulting from the use of these products. Part #02INSQuickGCCSaucer

QuickGrip

12-0500

Figure 6Figure 5

Figure 3 Figure 4

Figure 2

Figure 1

Cable and

Saucer

16-0018SS

Parts

Cable Clip

06-5050

Instructions for Hanging

Instruction Sheet

Step 1

For use with poster paper or thinner

substrates. Score and fold or staple poster

edge and slide into the QuickGrip Holder.

When using staples, place staples 1/4” from

ROSE DISPLAYS QUICKGRIP Instruction Sheet

ROSE DISPLAYS QUICKGRIP Instruction Sheet

ROSE DISPLAYS QUICKGRIP Instruction Sheet

Related papers

Other documents