ROSE DISPLAYS AnoGotcha User manual

Brand: ROSE DISPLAYS

Model: AnoGotcha

Type: User manual

Parts

Step 1

Insert T-Top Gotcha Holder into AnoGotcha

Shell. Fig. 1

Step 2

Push end caps into place. Fig. 2

Step 3

Snap the AnoGotcha Holder completely

open so that hinge is turned up as far as

possible. Insert poster into holder until top of

poster meets top of holder. To close snap the

AnoGotcha Holder shut. Fig. 3

With large or curling graphics, it may be

easier to insert graphic at one end and slide

into holder from one end to another.

Step 4

Insert hangers into upper portion

of slatwall. Hangers will rest on lower portion

of slatwall. Fig. 4

Note: To ensure that the frame hangs level

use two hangers placed an equal distance in

from each side of the frame.

Step 5

Place the AnoGotcha on the hangers using

the bottom channel of the top rail. Fig. 5

Important note:

Please save and reuse the AnoGotcha Holder,

End Caps and sSlatwall Hangers for future

projects.

Instruction Sheet

AnoGotcha™

Instructions for Hanging

Incept-9.9.02

AnoGotcha™ is a trademark and Gotcha® is a registered trademark of Rose

Displays, Ltd. Neither the manufacturer nor any sales agent may be held

liable for injury, loss or damage resulting from the use

of these products. Part #02INSAnoGotchaSlatwall

Figure 4

Figure 2Figure 1

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Figure 3

End Caps

06-5525

AnoGotcha Shell

12AG400 T-Top Gotcha

Slatwall Hangers

06-6068

Figure 5

Parts

Step 1

Insert T-Top Gotcha Holder into AnoGotcha

Shell. Fig. 1

Step 2

Push end caps into place. Fig. 2

Step 3

Snap the AnoGotcha Holder completely

open so that hinge is turned up as far as

possible. Insert poster into holder until top of

poster meets top of holder. To close snap the

AnoGotcha Holder shut. Fig. 3

With large or curling graphics, it may be

easier to insert graphic at one end and slide

into holder from one end to another.

Step 4

Insert hangers into upper portion

of slatwall. Hangers will rest on lower portion

of slatwall. Fig. 4

Note: To ensure that the frame hangs level

use two hangers placed an equal distance in

from each side of the frame.

Step 5

Place the AnoGotcha on the hangers using

the bottom channel of the top rail. Fig. 5

Important note:

Please save and reuse the AnoGotcha Holder,

End Caps and sSlatwall Hangers for future

projects.

Instruction Sheet

AnoGotcha™

Instructions for Hanging

Incept-9.9.02

AnoGotcha™ is a trademark and Gotcha® is a registered trademark of Rose

Displays, Ltd. Neither the manufacturer nor any sales agent may be held

liable for injury, loss or damage resulting from the use

of these products. Part #02INSAnoGotchaSlatwall

Figure 4

Figure 2Figure 1

Figure 3

End Caps

06-5525

AnoGotcha Shell

12AG400 T-Top Gotcha

Slatwall Hangers

06-6068

Figure 5

ROSE DISPLAYS AnoGotcha User manual

ROSE DISPLAYS AnoGotcha User manual

ROSE DISPLAYS AnoGotcha User manual

Related papers

Other documents