Diebold Nixdorf CS 6050 Operating instructions

Operating Manual

CINEO C6050

Self-Service

Systems

Questions and suggestions

CINEO C6050 - Operating Manual 01750223755 A

Do you have ...

... any questions or suggestions

regarding this manual?

Please contact the following address

giving the order number of this manual

in your message:

Address:

WINCOR NIXDORF International GmbH

Handbuchredaktion BD PSD 43

D - 33094 Paderborn

Germany

Fax: +49 (0) 52 51 693-62 09

E-mail: [email protected]

... any technical questions or problems?

Please contact your local representative.

Edition November 2011

CINEO C6050

Operating Manual

CINEO C6050 - Operating Manual 01750223755 A

All rights, including rights of translation

and rights of reproduction by reprinting,

copying or similar methods, even of

parts, are reserved.

Any violations give rise to a claim for

damages.

All rights, including rights created by

patent grants or registration of a utility

model or design, are reserved. Delivery

subject to availability; right of technical

modifications reserved.

All names of hardware and software

products mentioned in this manual are

trade names and/or trademarks of their

respective manufacturers.

This manual was

produced using paper

treated with chlorine-free

bleach.

01750223755 A CINEO C6050 - Operating Manual I

Contents

Introduction ............................................................................................... 1

Symbols used in this manual ...................................................................... 1

Important safety precautions ...................................................................... 1

General power interruption ......................................................................... 4

Device Overview ....................................................................................... 7

Device views ............................................................................................... 8

Front side ............................................................................................... 8

Front door open ..................................................................................... 9

Device open ......................................................................................... 10

Head unit pulled out ............................................................................ 11

Safe unit pulled out .............................................................................. 12

Vents ................................................................................................... 13

Basic Operation ...................................................................................... 15

Calling the product-specific software ........................................................ 15

Switching the device on/off ....................................................................... 16

Switching the device in the service mode ................................................ 17

Arming/Disarming the robbery alarm system ........................................... 18

Arming the robbery alarm system (active) .......................................... 18

Disarming the robbery alarm system (inactive) ................................... 19

Opening/closing the device ...................................................................... 20

Opening/closing the front door without deposit compartments ........... 20

Opening/closing the front door with deposit compartments ................ 22

Opening/closing the safe ..................................................................... 25

Lifting up/pushing down the customer panel ....................................... 26

Pulling out/pushing in the head unit .................................................... 27

Pulling out/pushing in the safe unit...................................................... 28

Buttons and indicators .............................................................................. 30

CINEO deposit compartments .................................................................. 31

Function elements ............................................................................... 31

Empty the deposit compartments ........................................................ 32

Technical data ..................................................................................... 33

RM3 UT .................................................................................................... 35

Overall view .............................................................................................. 35

Contents

II CINEO C6050 - Operating Manual 01750223755 A

Basic properties ........................................................................................ 37

Head unit ................................................................................................... 38

Overall view ......................................................................................... 38

Head unit opened ................................................................................ 39

Safe unit .................................................................................................... 40

Overall view ......................................................................................... 40

Safe unit opened .................................................................................. 41

Important safety precautions .................................................................... 42

CINEO cassettes ...................................................................................... 43

Overview .............................................................................................. 43

CINEO cassettes concept ................................................................... 44

Manipulation monitoring ....................................................................... 45

Status messages of the LED ............................................................... 45

Compact cassette Basic/Midrange ...................................................... 46

Compact cassette Basic/Midrange opened .................................... 47

Compact cassette High End ................................................................ 48

Compact cassette High End opened .............................................. 49

CAT 2 cassette .................................................................................... 50

Reject cassette, large ..................................................................... 52

Banknote toning technique .................................................................. 54

Modes of the banknote toning technique - CINEO high end

cassette .......................................................................................... 55

Init mode .................................................................................... 56

OFF mode ................................................................................. 57

Transport mode ......................................................................... 58

Open shutter mode .................................................................... 59

Open safe mode ........................................................................ 60

Safe mode ................................................................................. 61

Trustee mode ............................................................................ 62

Inking mode ............................................................................... 63

Service OFF mode .................................................................... 64

Service note ............................................................................... 65

LED display – Power supply ................................................................ 66

Handling the CINEO cassettes ................................................................. 67

Safety instructions ............................................................................... 67

CAT 2 cassette .................................................................................... 68

Removing the CAT 2 cassette ........................................................ 68

Inserting the CAT 2 cassette .......................................................... 69

Emptying the CAT 2 cassette ......................................................... 69

CINEO cassette ................................................................................... 70

Contents

01750223755 A CINEO C6050 - Operating Manual III

Removing the CINEO cassette from the safe unit ......................... 70

Installing the CINEO cassette in the safe unit ................................ 71

Removing/inserting the large reject cassette ................................. 71

Removing/inserting the CINEO compact cassette ......................... 73

Emptying the reject cassette (large) ......................................... 74

Inserting the high end cassette in the docking station ................... 75

Removing the cassette from the docking station ........................... 76

Opening the cassette ..................................................................... 77

Closing the cassette ....................................................................... 77

Removing/refilling banknotes ......................................................... 78

Refill notes ...................................................................................... 80

Preparing banknotes ................................................................. 80

Note transport paths RM3 UT .................................................................. 87

Banknote paths in head unit ................................................................ 87

Banknote paths in safe RM3 UT ......................................................... 88

Handling/clearing banknote jams ............................................................. 89

Safety precaution ................................................................................. 89

RM3 UT head unit ............................................................................... 90

Opening/closing the banknote path of the reel storage unit .......... 90

Raising/closing the intermediate transport units on the

transport module short path ........................................................... 92

Pulling out/pushing in the cash input/output module ...................... 95

Raising/closing the cash input/output module ................................ 96

Opening/closing the intermediate transport unit above on the

cash input/output tray ..................................................................... 98

Opening/closing the intermediate transport unit below on the

input/output tray ............................................................................ 100

Raising the transport module short path ...................................... 102

Pulling out/pushing in the reel storage unit .................................. 103

Removing/inserting cassette CAT 2 ............................................. 105

Raising/closing the main module ................................................. 106

Opening/closing the Escrow transport module ............................ 108

Opening/closing the alignment station top part ............................ 111

Opening/closing the banknote validator ....................................... 113

Opening/closing the in/output reel storage ........................................ 115

Safe unit RM3 UT .............................................................................. 116

Removing/inserting the rear reel storage unit .............................. 116

Distributor module transport connection ...................................... 117

Moving the rear reel storage rack ................................................ 118

Moving the front reel storage rack

................................................ 119

Contents

IV CINEO C6050 - Operating Manual 01750223755 A

Opening/closing the distributor module flap ................................. 124

Closing the distributor module cover ............................................ 125

Settings ................................................................................................... 127

Fundamentals .................................................................................... 127

Setting the cash input module to the needed banknote size ............. 128

Setting the CINEO cassettes to the needed banknote size .............. 130

Setting the banknote width in the CINEO cassettes .......................... 132

Setting the banknote height in the CINEO cassettes ........................ 134

Cleaning and maintenance ..................................................................... 138

Cleaning the scanner in the banknote validator ................................ 138

Approved cleaning agents ................................................................. 139

Technical data ......................................................................................... 140

Compact cassette Basic/Midrange .................................................... 140

Compact cassette High End .............................................................. 140

Stationary reel storage ....................................................................... 141

CAT 2 cassette .................................................................................. 141

Reject cassette, large ................................................................... 142

Malfunctions .......................................................................................... 143

General information ................................................................................ 143

Malfunctions of the safe .......................................................................... 143

Cleaning, Service and Maintenance .................................................... 145

Cleaning the housing .............................................................................. 145

Cleaning the keyboards/keypads............................................................ 146

Appendix ................................................................................................ 147

Technical data ......................................................................................... 147

Electrical characteristics of the supply network ................................. 147

Device conditions ............................................................................... 148

Installation specifications ................................................................... 149

Environmental conditions................................................................... 150

Climatic environmental conditions pursuant to EN 60721 ............ 150

Mechanical environmental conditions pursuant to EN 60721 ...... 150

Noise emission in acc. with EN 27779 ......................................... 151

Consumables .......................................................................................... 152

Orders ................................................................................................ 152

Loading aid ........................................................................................ 152

Compliance with standards and certifications ........................................ 152

Standards met ................................................................................... 152

Contents

01750223755 A CINEO C6050 - Operating Manual V

Conformity ......................................................................................... 153

Notes concerning radio interference suppression and electrical

safety ................................................................................................. 153

Certification for data transmission ..................................................... 154

FCC rules and Canadian Standard ICES - 003 ................................ 154

UL 291, Level 1 (security Container) ................................................. 154

Environmental protection ........................................................................ 155

Environmentally and recycling-friendly product development ........... 155

Saving energy .................................................................................... 155

Disposing of used consumables ....................................................... 155

Labels on plastic case parts .............................................................. 155

Returning, recycling and disposing of used units and

consumables ..................................................................................... 156

Contents

VI CINEO C6050 - Operating Manual 01750223755 A

01750223755 A CINEO C6050 - Operating Manual VII

Abbreviations

C

CE Communauté Européenne

(European Community)

Declaration of Conformity

CEN Comité Européen de

Normalisation (European

Committee for

Standardisation)

D

DT Data Transmission

E

EC European Community

EDP Electronic Data

Processing

EEC European Economic

Community

EMA Intruder alarm system

EMC Electromagnetic

Compatibility

EN European standard

G

GmbH Limited liability company

I

IP International Protection

K

KSM Seismic vibration detector

P

PC Personal Computer

(system unit of device)

S

SELV Safety Extra-Low Voltage

SOP Service and Operating

Program

SOP Service Operator Panel

T

TN network Power supply

network in accordance

with EN 60950

U

UL Underwriters Laboratories

Inc.

ÜMA Robbery alarm system

UPS Uninterruptible Power

Supply

Abbreviations

VIII CINEO C6050 - Operating Manual 01750223755 A

01750223755 A CINEO C6050 - Operating Manual 1

Introduction

This operating manual provides all the information required for problem-free

operation of the CINEO C6050.

After you studied the operating manual, you will be able to:

− empty and fill cassettes with banknotes,

− eliminate malfunctions (such as banknote jams),

− properly operate the device.

Symbols used in this manual

− Text following this mark represents an item in a list.

" " Text in quotation marks contains references to other chapters or sections in

this document.

• Paragraphs following this symbol are actions to be performed in the order

in which they are specified.

Text following this symbol should be given special attention in order to

avoid damage and injury.

i

This symbol identifies paragraphs which contain general notes to

facilitate use of the device and help avoid operating errors.

Important safety precautions

Please read the following notes carefully before doing any work on the

device.

Be careful not to injure your head when the customer panel is lifted up!

Introduction

2 CINEO C6050 - Operating Manual 01750223755 A

When the functionality of the gas springs decreases, the Service must

be informed, for there is a risk of injury.

This device complies with the relevant safety regulations for information

processing equipment.

− Note the warning and information labels on the device.

− Unless otherwise stated, grasp the components only by the green ledge

when handling them.

− The device is equipped with a safety-tested power cable which must be

connected only to a suitable grounded outlet.

− Replace the lighting unit in the customer panel only when the device is

switched off.

− Always hold the plug when removing the power cable. Never pull the cable

itself.

− Install cables in such a way that they will not be stepped on or tripped over

or damaged or crushed in any way.

− Have damaged power cables replaced immediately.

− Make sure that there is always free access to the sockets used or to the

electrical circuit-breakers of the house installation.

− In case of an emergency (e.g. damaged cabinets, controls or power cables,

liquids or foreign objects in the device) take the following steps:

Deactivate the device immediately by:

Switching off the automatic circuit-breaker or removing the fuse inset

from the fuse holder in the distribution box of the building installation.

Disconnecting the plug connectors of the power supply cable from the

grounded sockets in the building installation.

Switching off the power switch on the power distributor.

If installed, interrupting the power connection between the UPS

(uninterruptible power supply) and the device (see section "General

power interrupt").

Inform the customer service responsible for you.

Introduction

01750223755 A CINEO C6050 - Operating Manual 3

− During a thunderstorm, data transmission lines must not be connected or

disconnected.

− Always keep the device's vents free from obstruction to ensure proper air

circulation and to prevent malfunctions resulting from overheating.

− Only use accessories and extension components which have been

approved by us. Nonobservance can result in damage to the device or

violations of regulations concerning safety, radio interference and

ergonomical requirements.

− Note that there are only safety extra-low voltage circuits (SELV circuits) if

you want to feed voltage from an external source into prepared cables to

install additional electronics (e. g. EMA connection, relay panel for external

features).

− To clean the device only use cleaning agents approved by

WINCOR NIXDORF International GmbH (see chapter "Appendix").

Repairs

Repair work may only be carried out by authorized personnel.

Unauthorized opening of the device or repair work carried out

improperly could result in considerable danger to the user.

In case of noncompliance, WINCOR NIXDORF International GmbH

excludes all liability.

General power interruption Introduction

4 CINEO C6050 - Operating Manual 01750223755 A

Lithium batteries

The handling and the replacement should only be performed by

authorized service personnel who were trained by the

WINCOR NIXDORF International GmbH.

There is danger of fire or explosion if the batteries are handled

improperly. It is therefore important to note the following points:

– Avoid short circuits

– Never recharge the battery

– Avoid temperatures above +100 °C (+212 °F).

– Do not try to open the battery by force

– Do not allow the battery to come in contact with water or fire

The battery should only be replaced with the same or an equivalent

type recommended by WINCOR NIXDORF International GmbH (see

chapter “Appendix,” section “Consumables”).

Dispose of used batteries in compliance with national regulations and

the manufacturer's specifications.

General power interruption

i

A

general power interrupt has the following effects:

– All current transactions are immediately aborted.

– Banknotes remain in the transport paths. They are transported to

the reject tray after the device is switched on again.

• Switch the device off (see chapter "Basic Operation", section "Switching the

device on/off").

• To ensure that the entire device is disconnected from power, you must also

pull the plug of the power cable from the wall outlet or interrupt the power

supply in the distributor box of the building by switching off the circuit-

breaker or by removing the fuse.

or

Introduction General power interruption

01750223755 A CINEO C6050 - Operating Manual 5

Disconnect the power cable on the

rear side of the device.

General power interruption Introduction

6 CINEO C6050 - Operating Manual 01750223755 A

01750223755 A CINEO C6050 - Operating Manual 7

Device Overview

The CINEO C6050 is a banknote deposit/dispenser device which has been

designed for indoor installation. The device is operated via the product-specific

software for the system unit (PC) connected to the device.

The deposit procedure takes place via the cash input module. A maximum of

200 banknotes can be deposited per deposit transaction.

The closed cash cycle means that deposited banknotes are made available

again for subsequent transactions. The closed cash cycle is made possible by

using transport modules and up to five drum modules.

The dispensing procedure takes place via the cash output module.

Device views Device Overview

8 CINEO C6050 - Operating Manual 01750223755 A

Device views

Front side

5

6

7

9

2

1

3

4

8

10

11

12

1 BA80 – 8.4" LCD monitor (optional) 7 Optical indicators

2 Output tray 8 Customer panel display

3 Input tray 9 SOP button / ON/OFF switch

4 Control panel 10 Deposit input right (optional)

5 Front door lock / A lock 11 Deposit input left (optional)

6 Front door lock / B lock (only

optional with a CINEO C6050 with

Deposit)

12 Front door

Page is loading ...

Diebold Nixdorf CS 6050 Operating instructions

Diebold Nixdorf CS 6050 Operating instructions

Related papers

Other documents