Digital Watchdog DWC-PZWM User guide
- Category
- Security camera accessories
- Type
- User guide
Digital Watchdog DWC-PZWM is an outdoor multi-sensor dome camera wall mount bracket that allows for flexible positioning and installation of your camera. With its sturdy construction and weather-resistant design, it ensures stable and secure mounting of your camera in various outdoor environments. The mount comes with all the necessary hardware for hassle-free installation, including screws, anchors, and a safety wire for added security.
Digital Watchdog DWC-PZWM is an outdoor multi-sensor dome camera wall mount bracket that allows for flexible positioning and installation of your camera. With its sturdy construction and weather-resistant design, it ensures stable and secure mounting of your camera in various outdoor environments. The mount comes with all the necessary hardware for hassle-free installation, including screws, anchors, and a safety wire for added security.
DWC-PZWM
Wall mount bracket for multi-sensor cameras
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
Camera Mounting Screws 2Mounting Pad 1
Screws and Plastic Anchors 4Mounting Template 1
Safety Wire 1Quick Setup Guide
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Wall Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Mount Template Mount Pad
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
202
144
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Wall Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Mount Template Mount Pad
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
202
144
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Wall Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Mount Template Mount Pad
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
202
144
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Wall Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Mount Template Mount Pad
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
202
144
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Wall Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Mount Template Mount Pad
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
202
144
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Wall Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Mount Template Mount Pad
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
202
144
Quick Start Guide
Rev Date: 08/21
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION
1 Using the mounting template or the mounting bracket itself, mark and drill the
necessary holes on the mounting surface.
2 Secure the mounting bracket to the mounting surface using the screws and
anchors included. Use the mounting pad between the bracket’s arm and
mounting surface as needed.
3 Ax the safety wire at the bottom of the mounting bracket’s case. Connect the
other side of the safety wire to the base of the camera.
4 Pass wires through and make all necessary connections.
5 Secure the camera to the mounting bracket using
the included screws. Align the indented lines on the
side of the camera with the lines on the mounting
bracket as seen in the image on the right.
Rotate the camera clockwise to lock into position.
6 Adjust the camera modules’ position and angle and complete the installation
by placing the dome cover on the camera. Secure the dome cover to the camera
base using the screws included with the camera. See the camera’s QSG for
more information.
2. Installation 3. Dimension
Quick Manual
Ver. 1.0 / 2020.02
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Multi-Sensor Outdoor Dome Camera
Ceiling Bracket Manual
1. Accessories
Screw &
Plastic Anchor-4pcs
Manual
Mount Screw Safety Wire
Allen Wrench
Mount Pad
202
278
2
3
4
1Fix it with Safety Wire on the Bottom
case and fasten it to fit the joint of
Bracket and Bottom case well.
Remove the Rubber cap and tighten it
with a screw.
Secure the dome cover to the camera’s
bottom case using the torx wrench.
Remove the protective film from the
camera’s dome to complete the
installation.
UNLOCK
LOCK
Wall mount
Camera base
Camera dome cover
NOTE: Do not touch the lenses when handling the camera modules.
-
1
-
2
Digital Watchdog DWC-PZWM User guide
- Category
- Security camera accessories
- Type
- User guide
Digital Watchdog DWC-PZWM is an outdoor multi-sensor dome camera wall mount bracket that allows for flexible positioning and installation of your camera. With its sturdy construction and weather-resistant design, it ensures stable and secure mounting of your camera in various outdoor environments. The mount comes with all the necessary hardware for hassle-free installation, including screws, anchors, and a safety wire for added security.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Digital Watchdog DWC-V1HMW Vandal Dome Camera Hanging Mount User guide
-
Digital Watchdog DWC-V7HMW V7 Ultra Hanging Mount User guide
-
Digital Watchdog DWC-PZ21M69T Installation guide
-
Digital Watchdog DWC-PZV2M72T Installation guide
-
Digital Watchdog DWC-PTZ37XAL Installation guide
-
Digital Watchdog x12 Analog WDR PTZ User manual
-
Digital Watchdog DWC-PVX16W Installation guide
-
Digital Watchdog DWC-BLJUNC-W User guide
-
Digital Watchdog MEGAPIX PANO DWC-PV2M4T Installation guide
-
Digital Watchdog DWC-V4283WTIR User manual
Other documents
-
DW C-PZ21M69TW MEGA PIX PANO Panoramic View IP Camera User guide
-
Vitek VTD-MV8NZ311P Quick start guide
-
DW C-MB45iALPRTW 5MP LPR Bullet IP Camera User guide
-
-
Vitek VTC-CB4MZ39 User manual
-
Riva RC3402HD-6311 Installation guide
-
i-PRO i-PRO WV-U2542LA Network Camera Installation guide
-
Geovision GV-UNP2500 User manual
