2. Digital Watchdog
  3. DWC-V7HMW V7 Ultra Hanging Mount

Digital Watchdog DWC-V7HMW V7 Ultra Hanging Mount User guide

  • Hello! I'm your chat assistant. I've reviewed the Quick Start Guide for the Digital Watchdog V7 DWC-V7HMW hanging mount. This document details the installation of the hanging mount and outlines key steps such as mounting to a pole, securing the camera, and wiring connections. I'm ready to answer any questions you have about this device and the installation process.
  • What is included in the package?
    How to install the camera to the hanging mount?
    Where can I find more support materials?
Hanging mount for V7 ultra low-profile vandal domes
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
Camera Mounting Screws 2Quick Setup Guide 1
DWC-V7HMW
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Outdoor Dome Camera
Ceiling Mount Bracket Manual
1. Dimension & Accessories
Screw &
Plasc Anchor-4pcs
Manual Mount Pad
2
3
4
5
1Aach the Mount Pad and mount it on
the ceiling.
Tighten by turning Mount Cap and Pipe.
Connect the cable.
Aach the camera boom to the mount
hole.
Aer adjusng the camera, aach the
upper case to complete the mounng.
249
124
82
78
249.0
30
101.7
Mount
Screw 2ea
Mount Template
Hexagonal Wrench
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Please check if all the camera and accessories are included in the package.
Outdoor Dome Camera
Ceiling Mount Bracket Manual
1. Dimension & Accessories
Screw &
Plasc Anchor-4pcs
Manual Mount Pad
2
3
4
5
1Aach the Mount Pad and mount it on
the ceiling.
Tighten by turning Mount Cap and Pipe.
Connect the cable.
Aach the camera boom to the mount
hole.
Aer adjusng the camera, aach the
upper case to complete the mounng.
249
124
82
78
249.0
30
101.7
Mount
Screw 2ea
Mount Template
Hexagonal Wrench
Quick Start Guide
Rev: 11/22
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION
NTP 3/4 TAP
Pipe
Mount Cap
1 Secure the hanging mount to the pole (NTP ¾ thread).
2 Before attaching the camera to the hanging mount, remove the dome
from the camera base.
3 Pass wires through and make all necessary connections.
4 Use the camera mounting screws (included with bracket) to secure the
camera to the mount cap.
5 Adjust the camera lens modules’ position and complete the installation by
placing the dome cover on the camera. See the camera’s QSG for camera
setup information.
NOTE: Do not touch the lenses when handling the camera modules.
/