Digital Watchdog DWC-BLJUNC-W User guide

Type
User guide
DWC-BLJUNC-W DWC-BLJUNC
Junction box for bullet cameras
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the Search by Product search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click Search. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
Camera Mounting Screws 4Quick Setup Guide 1
Screws and Plastic Anchors 4Mounting Template 1
80
98
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Bullet Camera
Junction Box Manual
1. Dimension & Accessories
2
3
4
1Using provided template sheet, make
holes on the ceiling panel in the desired
locaon.
By ghtening four screws provided,
aach the mount bracket on the panel.
Connect the cables respecvely.
78
Please check if all the camera and accessories are included in the package.
Mount
Screw 4ea Manual Mount Template
Screw &
Plasc Anchor-4pcs
80
98
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Bullet Camera
Junction Box Manual
1. Dimension & Accessories
2
3
4
1Using provided template sheet, make
holes on the ceiling panel in the desired
locaon.
By ghtening four screws provided,
aach the mount bracket on the panel.
Connect the cables respecvely.
78
Please check if all the camera and accessories are included in the package.
Mount
Screw 4ea Manual Mount Template
Screw &
Plasc Anchor-4pcs
80
98
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Bullet Camera
Junction Box Manual
1. Dimension & Accessories
2
3
4
1Using provided template sheet, make
holes on the ceiling panel in the desired
locaon.
By ghtening four screws provided,
aach the mount bracket on the panel.
Connect the cables respecvely.
78
Please check if all the camera and accessories are included in the package.
Mount
Screw 4ea Manual Mount Template
Screw &
Plasc Anchor-4pcs
80
98
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Bullet Camera
Junction Box Manual
1. Dimension & Accessories
2
3
4
1Using provided template sheet, make
holes on the ceiling panel in the desired
locaon.
By ghtening four screws provided,
aach the mount bracket on the panel.
Connect the cables respecvely.
78
Please check if all the camera and accessories are included in the package.
Mount
Screw 4ea Manual Mount Template
Screw &
Plasc Anchor-4pcs
Quick Start Guide
Rev Date: 08/21
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
80
98
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Bullet Camera
Junction Box Manual
1. Dimension & Accessories
2
3
4
1Using provided template sheet, make
holes on the ceiling panel in the desired
locaon.
By ghtening four screws provided,
aach the mount bracket on the panel.
Connect the cables respecvely.
78
Please check if all the camera and accessories are included in the package.
Mount
Screw 4ea Manual Mount Template
Screw &
Plasc Anchor-4pcs
INSTALLATION
1 Using the mounting template or the junction box itself, mark and drill the necessary holes in the mounting surface.
2 Use the screws and anchors included with the junction box to secure it to the mounting surface.
3 Pass wires through and make all necessary connections to the camera. See the camera’s QSG for more information.
4 Using the camera mounting screws included with the junction box, align the orientation of the camera’s installation holes
and secure it to the junction box.
Junction box
Camera arm
  • Page 1 1
  • Page 2 2

Digital Watchdog DWC-BLJUNC-W User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI