Digital Watchdog DWC-V1HMW Vandal Dome Camera Hanging Mount User guide

  • Hello! I've reviewed the Quick Start Guide for the Digital Watchdog Hanging mount DWC-V1HMW. This document outlines the installation process, including mounting to a pole, connecting wires, and adjusting the camera. I'm ready to answer your questions regarding the hanging mount and its setup.
  • What size thread does the hanging mount use?
    What should I do before attaching the camera to the hanging mount?
    What is used to secure camera to the mount?
Hanging mount for vandal dome cameras
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the Search by Product search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click Search. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
DWC-V1HMW
WHAT’S IN THE BOX
Camera Mounting Screws 4Quick Setup Guide 1
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Outdoor Dome Camera
Ceiling Mount Bracket Manual
1. Dimension & Accessories
229.32
226.62
154.1
2
3
4
1Aach the Mount Pad and mount it on
the ceiling.
Connect the cable.
Aach the camera boom to the mount
hole.
Aer adjusng the camera, aach the
upper case to complete the mounng.
Mount Pad
Please check if all the camera and accessories are included in the package.
Screw &
Plasc Anchor-4pcs
Manual
Mount
Screw 4ea
Mount
Screw 4ea
Mount Template
Hexagonal Wrench
2. Installation
Quick Manual
Ver. 1.0 / 2021.05
Before installing and using the Camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Outdoor Dome Camera
Ceiling Mount Bracket Manual
1. Dimension & Accessories
229.32
226.62
154.1
2
3
4
1Aach the Mount Pad and mount it on
the ceiling.
Connect the cable.
Aach the camera boom to the mount
hole.
Aer adjusng the camera, aach the
upper case to complete the mounng.
Mount Pad
Please check if all the camera and accessories are included in the package.
Screw &
Plasc Anchor-4pcs
Manual
Mount
Screw 4ea
Mount
Screw 4ea
Mount Template
Hexagonal Wrench
Quick Start Guide
Rev: 11/22
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION
1 Secure the hanging mount to the pole (NTP ¾ thread).
2 Before attaching the camera to the hanging mount, remove the dome
from the camera base.
3 Pass wires through and make all necessary connections.
4 Use the camera mounting screws (included with bracket) to secure the
camera to the mount cap.
5 Adjust the camera lens modules’ position and complete the installation
by placing the dome cover on the camera. See the cameras QSG for
camera setup information.
NOTE: Do not touch the lenses when handling the camera modules.
NTP 3/4 TAP
Pipe
Mount Cap
/