2. Herman Miller
  3. My Studio Environments

Herman Miller My Studio Environments Product Instructions

  • Hello, I'm a chat assistant, and I've reviewed the installation instructions for the Cable Manager 1B2H4L. This document outlines the steps for integrating the cable manager with the Center Wall Frame, including how to position it around the electrical harness and secure telecommunication lines. I am ready to answer your questions about the installation process and features described in this guide.
  • Where should the Cable Manager be inserted?
    What is the purpose of the jog in the Cable Manager?
    How should Data and Telecommunication Lines be secured?
z
Z Y
My Studio Environments™
Center Wall Cable Manager
Installation
A1BLLF RLS FOR PROD MEK JC 08/09/05
INSTRUCTIONS-
CENTER WALL CABLE MANAGER INSTALLATION
MAKE FROM 115160
MEK 08/09/05 JC 08/09/05
PG 04/21/06 JC 08/09/05
13
1B2H4L
1B2H4L
REV PROD NAME MEK PG 4/21/06
1BSKRB
z
Z Y
1B2H4L REV B
My Studio Environments™ Center Wall Cable Manager
Installation
Parts Included:
Cable Manager
1
1. Insert end of Cable Manager into Rectangular Hole in Center Wall Frame Mid-Rail.
2. Turn Cable Manager so that it jogs around Electrical Harness and holds in hole.
Cable Manager
Rectangle Hole
Rectangle Hole
Mid-Rail
Electrical
Harness
Jog
Cable Manager
IMPORTANT: Save these instructions for layout changes.
z
Z Y
1B2H4L REV B
1. Repeat process at other hole location.
2
Cable Manager
1. Secure Data and Telecommunications Lines to Cable Manager with customer
3
supplied Tie Straps.
Data & Telecommunication
Lines
Tie Strap
Cable Manager
/