Herman Miller My Studio Environments Product Instructions

Type
Product Instructions
z
Z Y
My Studio Environments
Header Installation
A1BKLV RLS FOR PROD MEK KF 12/27/04
INSTRUCTIONS-
HEADER INSTALLATION
MAKE FROM 115160
MEK 12/27/04 KF 12/27/04
KF 07/31/06 KF
13
1B25BK
1B25BK
z
Z Y
REV PROD NAME MEK PG 04/21/06
1BSKRB
C1BTVG
RMV CLADDING RETAINER NKS KF 7/31/06
1B25BK REV C
z
Z Y
My Studio Environments Header Installation
Tools Required:
Rail
5/16 Allen
Parts Included:
A
Rail Post (3),
B3/8-16 x 3 Hex Socket Hd
C
Hardware Pack
Rail Extension
D
2 foot Extension 6 foot Extension
(NT134.C only) (NT134.D only)
Rail Connector
E
(4), (5) or (7) Screw (3), (4), (5) or (7)
#10-24 x .5 Pan Hd
FMachine Screw (2) G10-24 Hex
#2 Phillips 3/8” wrench
Screwdriver
Wrench
Nut (2)
1
A
D
E
F
G
G
F
For Products NT134.C and NT134.D: Add Rail Extension to Rail.
1. Set Rail and Rail Extension end to end.
2. Place Rail Connector under Rails.
3. Secure Rail Connector to Rails with (2) Machine Screws and (2) Hex Nuts.
IMPORTANT: Save these instructions for layout changes.
1B25BK REV C
z
Z Y
1. Place Rail Posts on top of Support Tubes.
2. Set Rail on top of Rail Posts.
3. Install Hex Socket Head Screws.
A
A
C
C
C
B
B
B
Support Tube
Note: 8 foot Door Rail Shown. See diagram at
right for Screw locations for other lengths.
.
228” window 24” window doorway
frame frame
doorway
24” window
frame
28” window
frame
24” windowdoorway
28” window
frame
Screw locations for 10 foot Door Rail
24” window
frame
frame
28” window 24” window
frame
frame
28” window
doorway
doorway
frame
28” window doorway 24” window
frame
2 or 6 foot
2 or 6 foot
2 or 6 foot
Extension
Extension
Extension
frame
24” window
frame
24” window
frame
24” window
Screw locations for 12 & 16 foot Door Rails
Note: 6 foot Rail Extension require 2 additional support tubes 2 feet apart.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Herman Miller My Studio Environments Product Instructions

Type
Product Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI