Haworth 7029-9873 Operating instructions

  • Hello! I've reviewed the Installation Instructions for the Controlled Receptacle Label. This document outlines how to properly install the labels while adhering to various safety standards. I can help answer your questions about the instructions and compliant standards mentioned in the document.
  • What standard does the Controlled Receptacle Label comply with?
    Is the Controlled Receptacle Label for indoor or outdoor use?
    What should you not block when installing the label?
NOTE: DO NOT block outlet &
circuit identication.
1 of 1 7029-9873 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
2.0298-663
Controlled Receptacle Label
Installation Instructions
Controlled Receptacle Label
complies with UL 969 (standard
for marking and labeling systems)
requirements for indoor use.
Labels comply with National
Electric Code (NEC) Article 406,
Ashrae 90.1 Section 8.4, California
Energy Commission Title 24
Section 130 and NEMA receptacle
markings.
/