Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
2351-911 1 of 4 7029-9887
IMPORTANT
ATTENTION - DO NOT DISCARD - ACRYLIC CARE and CLEANING
“INSTALLER, PLEASE DETACH AND PLACE ACRYLIC CARE SHEET UNDER TOP PRIOR TO SERVICE”
CAUTION: Never use window cleaner, ammonia products, or other chemical sprays on acrylic!
Cleaning Acrylic:
Use only a very soft damp cloth when cleaning acrylic surfaces. It is possible to scratch acrylic, so
NEVER use any scouring compounds or chemical cleaners such as Windex or other glass cleaners (even
if they are environmentally friendly, organic or non-scented). Should anything ever stick to an acrylic
surface (such as an adhesive label or gummy substance) do not use any type of solvent.
Never use the same cloth that you clean other household items with - It can retain dirt, grit, and
chemical residues that may harm your acrylic items. We recommend using a new or separate cloth for
your acrylic care.
Scratches do happen - but don’t worry! Unlike other materials, scratches on acrylic can be easily
removed.
Protective Paper
F
NOTE: Remove protective paper (F)
before installing.
NOTE: Place “ACRYLIC CARE and CLEANING”
instructions (AA) under acrylic top (A).
A
AA
B
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
2351-911
XSERIES®
Recycle Bin
Installation Instructions
Tools Required
2 of 4 7029-9887
#2
BRecycle
Center
CPackaging
Foam
D
Bin
NOTE: Remove foam (C)
and discard in appropriate
recycle bin.
1
1
2
AAcrylic Top
Protective Paper
1/4”
F
F
Level recycle center (B)
1
Insert bins (D)
2Remove protective lm (F) (top & bottom)
3
Install top (A)
41
1
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
2351-911 3 of 4 7029-9887
2
F
F
B
A
1-1/2" MAX.
E
B
D
B
A
4 of 4
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
351-911 7029-9887 Rev:
Part No: 2
DOOR HINGE ADJUSTMENTDOOR INSTALLATION/REMOVAL
2
1
1
2
3
1
2
3
J
J
DOOR PUSH LATCH ADJUSTMENT
1
3
K
2
/
