Diebold Nixdorf CS 2060 Operating instructions

Operating Manual

CINEO C2060

ProCash 8000

Questions and suggestions

CINEO C2060 / ProCash 8000 - Operating Manual 01750182392 D

Do you have ...

... any questions or suggestions

regarding this manual?

Please contact the following address

giving the order number of this manual

in your message:

Address:

WINCOR NIXDORF International GmbH

Handbuchredaktion R&D ACT 12

D - 33094 Paderborn

Germany

Fax: +49 (0) 52 51 693-62 09

E-mail: [email protected]

... any technical questions or problems?

Please contact your local representative.

March Edition 2013

CINEO C2060

ProCash 8000

Operating Manual

CINEO C2060 / ProCash 8000 - Operating Manual 01750182392 D

All rights, including rights of translation

and rights of reproduction by reprinting,

copying or similar methods, even of

parts, are reserved.

Any violations give rise to a claim for

damages.

All rights, including rights created by

patent grants or registration of a utility

model or design, are reserved. Delivery

subject to availability; right of technical

modifications reserved.

All names of hardware and software

products mentioned in this manual are

trade names and/or trademarks of their

respective manufacturers.

This manual was

produced using paper

treated with chlorine-free

bleach.

01750182392 D CINEO C2060 / ProCash 8000 - Operating Manual I

Contents

Introduction ............................................................................................... 1

Symbols used in this manual ...................................................................... 1

Important safety precautions ...................................................................... 2

General power interruption ......................................................................... 4

CINEO C2060 / ProCash 8000 Frontload.............................................. 5

CINEO C2060 / ProCash 8000 Rearload .............................................. 7

Device Overview ....................................................................................... 9

Device types ............................................................................................... 9

CINEO C2060 / ProCash 8000 Frontload.............................................. 9

CINEO C2060 / ProCash 8000 Rearload .............................................. 9

Components ............................................................................................. 10

CINEO C2060 ...................................................................................... 10

ProCash 8000 ...................................................................................... 11

Controls CINEO C2060 / ProCash 8000 Frontload .................................. 13

Overall view with standard door ........................................................... 13

Overall view with design door .............................................................. 15

Control panel ....................................................................................... 17

Control panel open .............................................................................. 21

Equipment carriage version A ........................................................ 21

Equipment carriage version B ........................................................ 22

Standard door open ............................................................................. 24

Design door open ................................................................................ 25

Safe open ............................................................................................ 26

Equipment carriage pulled out ............................................................. 28

Equipment carriage version A ........................................................ 28

Equipment carriage version B ........................................................ 29

Equipment carriage version C ........................................................ 30

Controls CINEO C2060 / ProCash 8000 Rearload ................................... 31

Overall view with standard cover sheet ............................................... 31

Overall view with design cover sheet ................................................... 33

Control panel ....................................................................................... 35

Power supply ....................................................................................... 39

Door of operating unit open ................................................................. 41

Equipment carriage version A ........................................................ 41

Equipment carriage version B ........................................................ 42

Equipment carriage pulled out ............................................................. 44

Equipment carriage version A ........................................................ 44

Contents

II CINEO C2060 / ProCash 8000 - Operating Manual 01750182392 D

Equipment carriage version B ......................................................... 45

Equipment carriage version C ........................................................ 46

Safe open ............................................................................................. 47

Keypad privacy shield ............................................................................... 49

Basic Operation ....................................................................................... 51

General information................................................................................... 51

Calling the product-specific software ........................................................ 52

Frontload .............................................................................................. 52

Rearload............................................................................................... 53

Opening/closing the device doors ............................................................. 55

CINEO C2060 / ProCash 8000 Frontload ............................................ 56

Opening/closing the standard door ................................................. 56

Opening/closing the design door .................................................... 57

Lifting up/pushing down the control panel ....................................... 59

Lifting up/pushing down the LCD monitor with operator panel

function ........................................................................................... 61

Lifting up/pushing down Operator Panel 04 - standard door .......... 63

Lifting up/pushing down Operator Panel 04 - design door .............. 64

Pulling out/pushing in equipment carriage A ................................... 65

Pulling out/pushing in equipment carriage B ................................... 65

Pulling out/pushing in equipment carriage C .................................. 66

Pulling out/pushing in the cash media dispenser ............................ 66

CINEO C2060 / ProCash 8000 Rearload ............................................ 67

Opening/closing the operator panel window ................................... 67

Opening / closing the door of the operating unit ............................. 68

Lifting up the control panel .............................................................. 69

Pushing down the control panel ...................................................... 72

Lifting up/pushing down the operator panel .................................... 73

Pulling out/pushing in equipment carriage A ................................... 74

Pulling out/pushing in equipment carriage B ................................... 75

Pulling out/pushing in equipment carriage C .................................. 76

Pulling out/pushing in the cash media dispenser ............................ 77

Switching the device on............................................................................. 78

Frontload .............................................................................................. 78

Rearload............................................................................................... 79

Switching the device off ............................................................................ 80

Frontload .............................................................................................. 81

Rearload............................................................................................... 82

Setting the loudspeaker volume ................................................................ 83

Frontload .............................................................................................. 83

Rearload............................................................................................... 84

Contents

01750182392 D CINEO C2060 / ProCash 8000 - Operating Manual III

Switching the monitor on........................................................................... 85

Frontload .............................................................................................. 85

Rearload .............................................................................................. 86

Setting the volume of the headphone jack ................................................ 87

Opening/closing the safe door .................................................................. 88

Opening/closing the safe door (with factory setting) ............................ 88

Opening the safe door (with factory setting) ................................... 89

Closing the safe door (with factory setting) .................................... 92

Changing the key and number combination locks ............................... 94

Changing the key-operated lock ..................................................... 95

Changing the number combination lock ......................................... 97

Setting the new 3-digit code, e.g. 60 - 33 - 43 ................................ 98

Opening/closing the safe door (with customized lock) ........................ 99

Opening the safe door (with customized lock) ............................. 100

Closing the safe door (with customized lock) ............................... 103

Access to UPS PW 5115 RM ................................................................. 104

Scanning barcodes ................................................................................. 106

'Remote status indicator' ......................................................................... 106

Replacing the logo on operating unit ...................................................... 108

Logo dimensions................................................................................ 108

Replacing the logo ............................................................................. 109

Replacing the small logo in the operating unit ........................................ 111

Logo dimensions................................................................................ 111

Replacing the logo ............................................................................. 112

Replacing the card logo .......................................................................... 114

Logo dimensions................................................................................ 114

Replacing the logo ............................................................................. 114

Replacing the card logo (with barcode reader) ....................................... 116

Logo dimensions................................................................................ 116

Replacing the logo ............................................................................. 116

Replacing the logo in the frame .............................................................. 117

Logo dimensions................................................................................ 117

Replacing the logo ............................................................................. 117

External control unit ............................................................................. 119

Keys and indicators ................................................................................. 119

Operator panel 04 ................................................................................. 123

Keys and indicators ................................................................................. 124

Operator panel 06 ................................................................................. 129

Keys and indicators ................................................................................. 130

Contents

IV CINEO C2060 / ProCash 8000 - Operating Manual 01750182392 D

CMD-V4 Vertical Cash-Out ................................................................... 135

Modules and function elements .............................................................. 135

Functional components and controls ...................................................... 136

Cash-out cassette ................................................................................... 137

Reject / retract cassette .......................................................................... 139

Avoidance of problems and damage ...................................................... 140

Safety precautions ............................................................................. 140

Removing the cassette............................................................................ 141

Opening the cassette .............................................................................. 142

Emptying the reject/retract cassette ........................................................ 143

Setting the low cash sensor .................................................................... 144

Setting the note width .............................................................................. 145

Removing the banknotes ................................................................... 145

Disengaging the banknote rails .......................................................... 146

Disengaging the banknote rail – note width less than 110 mm

(4.33") ........................................................................................... 147

Inserting the banknote rail .................................................................. 148

Inserting the banknote rail – note width less than 110 mm

(4.33") ........................................................................................... 150

Setting the banknote height .................................................................... 151

Filling the cash-out cassette .................................................................... 153

Preparing the cash-out cassette ........................................................ 153

Preparing the banknote bundles ........................................................ 155

Inserting banknote bundles ................................................................ 156

General refill notes ........................................................................ 156

New and used banknote bundles.................................................. 157

Deformed banknote bundles ......................................................... 157

Special comments for deformed banknotes ................................. 159

Inserting the cassette .............................................................................. 162

Closing the cassette ........................................................................... 162

Inserting the cassette ......................................................................... 163

Cassette initialization ............................................................................... 164

Determining the reference value ............................................................. 164

Troubleshooting ...................................................................................... 166

Overview of sensors and electromechanical components ................. 166

Meaning of abbreviations and symbols .............................................. 167

Electrical elements ........................................................................ 167

Status messages (CMD controller) ......................................................... 169

Checking the banknote paths ................................................................. 175

Checking the vertical transport .......................................................... 176

Checking the dispensing areas .......................................................... 177

Contents

01750182392 D CINEO C2060 / ProCash 8000 - Operating Manual V

Checking the stacker and output transport ........................................ 178

Function test ........................................................................................... 180

Technical data ........................................................................................ 183

Cash-out cassette .............................................................................. 183

Reject / retract cassette ..................................................................... 183

CMD-V5 vertical output ........................................................................ 185

View of Frontload unit with vertical output .............................................. 185

View of Rearload unit with vertical output ............................................... 186

Important safety precautions .................................................................. 187

CINEO cassettes .................................................................................... 188

Overview ............................................................................................ 188

CINEO cassettes concept ................................................................. 189

Manipulation monitoring ..................................................................... 190

Status messages of the LED ............................................................. 190

Standard cassette Basic/Midrange .................................................... 191

Standard cassette Basic/Midrange opened .................................. 192

Compact cassette Basic/Midrange .................................................... 193

Compact cassette Basic/Midrange opened .................................. 194

Standard cassette High End .............................................................. 195

Standard cassette High End opened ............................................ 196

Compact cassette High End .............................................................. 197

Compact cassette High End opened ............................................ 198

Reject / retract cassette ..................................................................... 199

Banknote toning technique ................................................................ 200

Banknote toning technique processes.......................................... 201

Description of processes ......................................................... 202

In Branch (at the branch outlet) .......................................... 202

CIT (armored transport company) ...................................... 202

CIT with case (armored transport company with case) ...... 202

Standard drum (Standard) ................................................. 202

Limiting value........................................................................... 203

Timer ....................................................................................... 204

Transport timer ................................................................... 204

Open safe timer .................................................................. 204

Alarm timer ......................................................................... 204

Case timer .......................................................................... 205

Modes of the banknote toning technique - High End CINEO

cassette ........................................................................................ 206

OFF mode (cassette configuration = In Branch *) ................... 207

OFF mode (cassette configuration = CIT, CIT with Case) ...... 209

Transport mode ....................................................................... 210

Contents

VI CINEO C2060 / ProCash 8000 - Operating Manual 01750182392 D

Open shutter mode .................................................................. 211

Open safe mode ...................................................................... 212

Safe mode ............................................................................... 213

Trustee mode .......................................................................... 214

Inking mode ............................................................................. 215

Service note ............................................................................. 216

LED display – Power supply ............................................................... 217

Handling the CINEO cassettes ............................................................... 218

Safety instructions .............................................................................. 218

CINEO cassette ................................................................................. 219

Removing cassettes ..................................................................... 220

Inserting cassettes ........................................................................ 221

Reject / retract cassette ........................................................... 221

CINEO cassettes ..................................................................... 222

Inserting the high end cassette in the docking station .................. 223

Removing the cassette from the docking station .......................... 224

Opening the reject/retract cassette ............................................... 225

Emptying the reject/retract cassette ............................................. 226

Closing the reject/retract cassette ................................................ 227

Opening the cassette .................................................................... 228

Closing the cassette...................................................................... 228

Removing/refilling banknotes ........................................................ 229

Refill notes .................................................................................... 231

Preparing banknotes................................................................ 231

Cassette initialization ......................................................................... 237

Sensors and electromechanical components ......................................... 238

CMD-V5 with vertical output transport ............................................... 238

Meaning of abbreviations and symbols .............................................. 239

Stacker and output transport ........................................................ 239

Components of dispensing unit and cassette ............................... 241

Checking the banknote paths ................................................................. 242

Checking the vertical transport .......................................................... 242

Checking the dispensing areas .......................................................... 244

Checking the stacker and output transport ........................................ 244

Stacker wheel area ....................................................................... 245

Single reject area .......................................................................... 245

Gear tracks of the stacker and output transport ........................... 246

Vertical output .......................................................................... 246

Settings ................................................................................................... 247

Fundamentals .................................................................................... 247

Setting the CINEO cassettes to the needed banknote size ............... 248

Setting the banknote width in the CINEO cassettes .......................... 250

Contents

01750182392 D CINEO C2060 / ProCash 8000 - Operating Manual VII

Setting the banknote height in the CINEO cassettes ........................ 252

Technical Data ........................................................................................ 256

Standard cassette Basic/Midrange .................................................... 256

Compact cassette Basic/Midrange .................................................... 256

Standard cassette High End .............................................................. 257

Compact cassette High End .............................................................. 257

Reject / retract cassette ..................................................................... 258

Receipt Printer NP07A .......................................................................... 259

Function elements and controls .............................................................. 260

Printer control panel ................................................................................ 261

Position of control mark sensor .............................................................. 262

Printer accessories ................................................................................. 264

Basic settings .......................................................................................... 265

Selecting the roll holder ..................................................................... 265

Setting the paper-low sensor ............................................................. 266

Positioning the control mark sensor .................................................. 267

Setting the paper roll width ................................................................ 268

Paper-low sensor / paper-out sensor ...................................................... 269

Paper-low sensor (adjustable) ........................................................... 269

Paper-out sensor ............................................................................... 269

Replacing the ribbon cartridge ................................................................ 270

Replacing the paper roll .......................................................................... 272

Removing the paper roll ..................................................................... 273

Inserting the paper roll ....................................................................... 273

ERROR LED blinking pattern ................................................................. 277

Recoverable errors ............................................................................ 277

Unrecoverable errors ......................................................................... 280

Problems ................................................................................................. 281

Paper jam .......................................................................................... 281

Removing scraps of paper from the presenter ............................. 282

Setting the cutter to home position ............................................... 283

Removing scraps of paper from the printing unit .......................... 284

Control mark detecting error .............................................................. 285

Cutter error ........................................................................................ 286

Remedying poor print quality ............................................................. 287

Temperature error print head ............................................................ 289

No supply voltage .............................................................................. 289

Cleaning the sensors ......................................................................... 290

Other problems .................................................................................. 290

Consumables .......................................................................................... 291

Ribbon cartridges ............................................................................... 291

Contents

VIII CINEO C2060 / ProCash 8000 - Operating Manual 01750182392 D

Print head ........................................................................................... 291

Paper products ................................................................................... 291

Paper specification ............................................................................. 292

Receipt roll dimensions ...................................................................... 292

Control mark print .............................................................................. 292

Control mark dimensions ................................................................... 293

Preprinted receipts ............................................................................. 294

Receipt printer TP07A/TP07A-2 ........................................................... 295

Functional components and controls ...................................................... 296

TP07A ................................................................................................ 296

TP07A-2 ............................................................................................. 298

Printer control panel ................................................................................ 300

Position of control mark sensor ............................................................... 301

Printer accessories.................................................................................. 305

Roller holders ..................................................................................... 305

Basic settings .......................................................................................... 306

Selecting the roller holder .................................................................. 306

Setting the paper-low sensor ............................................................. 307

Positioning the control mark sensor ................................................... 308

Changing the position of the control mark sensor on the

thermal print side .......................................................................... 308

Changing the position of the control mark sensor on the rear ...... 309

Changing the position of the control mark sensor between the

thermal print side and the rear ...................................................... 310

Paper-low sensor / paper-out sensor ...................................................... 314

Paper-low sensor ............................................................................... 314

Paper out sensor ................................................................................ 314

Replacing the paper roll .......................................................................... 315

Removing the paper roll ..................................................................... 315

Inserting the paper roll ....................................................................... 316

Blinking diagram of ERROR-LED ........................................................... 322

Recoverable errors ............................................................................ 322

Unrecoverable errors ......................................................................... 324

Malfunctions ....................................................................................... 325

Paper jam ..................................................................................... 325

Removing scraps of paper from the presenter ........................ 326

Removing scraps of paper from the thermal printing unit ........ 328

Setting the cutter to home position .................................................... 330

Control mark recognition error ........................................................... 331

Cutter error ......................................................................................... 332

Temperature error thermal print head ................................................ 333

Contents

01750182392 D CINEO C2060 / ProCash 8000 - Operating Manual IX

Remedying poor print quality ............................................................. 333

No supply voltage .............................................................................. 335

Cleaning the sensors ......................................................................... 336

Other problems .................................................................................. 336

Consumables .......................................................................................... 337

Thermal array .................................................................................... 337

Paper products .................................................................................. 337

Paper specification ............................................................................ 337

Receipt roll dimensions...................................................................... 338

Control mark print .............................................................................. 338

Control mark dimensions .............................................................. 338

Pre-printing receipts ........................................................................... 340

Receipt/label printer TP25 .................................................................... 341

Function elements and controls .............................................................. 342

Printer control panel ................................................................................ 344

Position of control marks ........................................................................ 345

Paper/label path ...................................................................................... 346

Printer accessories ................................................................................. 347

Paper roll holder ................................................................................ 347

Basic settings .......................................................................................... 348

Selecting the paper roll holder ........................................................... 348

Setting the paper-low sensor ............................................................. 349

Paper-low sensor / paper-out sensor ...................................................... 350

Paper-low sensor (adjustable) ........................................................... 350

Paper out sensor ............................................................................... 350

Replacing the paper/label roll ................................................................. 351

Removing the front label roll .............................................................. 352

Removing the rear paper roll ............................................................. 355

Reconnecting the paper roll holder .................................................... 357

Inserting the front label roll ................................................................ 359

Inserting the rear paper roll ................................................................ 361

Flashing pattern of the Status LED ......................................................... 363

Malfunctions ............................................................................................ 364

Paper jam .......................................................................................... 364

Removing scraps of paper from the presenter ............................. 365

Removing scraps of paper from the transport unit ....................... 366

Removing scraps of paper from the thermo printing unit/paper

cutter ............................................................................................. 368

Control mark recognition error ........................................................... 374

Temperature error thermo print head ................................................ 375

No supply voltage .............................................................................. 375

Contents

X CINEO C2060 / ProCash 8000 - Operating Manual 01750182392 D

Other problems .................................................................................. 375

Consumables .......................................................................................... 376

Paper products ................................................................................... 376

Paper specification ............................................................................. 376

Paper roll dimensions ........................................................................ 376

Control mark print .............................................................................. 377

Control mark dimensions .............................................................. 377

Label specification ............................................................................. 378

Label roll dimensions ......................................................................... 378

Control mark printing .......................................................................... 378

Control mark dimensions .............................................................. 378

Pre-printing receipts/labels ................................................................ 380

Journal Printer NP06 ............................................................................. 381

Function elements and controls .............................................................. 382

Printer control panel ................................................................................ 383

Printer accessories.................................................................................. 384

Paper-low sensor / paper-out sensor ...................................................... 385

Paper low sensor ............................................................................... 385

Paper out sensor ................................................................................ 385

Replacing the ribbon cartridge ................................................................ 386

Replacing the paper roll .......................................................................... 388

Removing the paper roll ..................................................................... 389

Inserting the paper roll ....................................................................... 390

ERROR LED blinking pattern .................................................................. 394

Errors that can be remedied by the customer .................................... 394

Unrecoverable errors ......................................................................... 395

Problems ................................................................................................. 396

Paper jam ........................................................................................... 396

Paper motion error ............................................................................. 399

Remedying poor print quality ............................................................. 400

Print head temperature error .............................................................. 401

No supply voltage ............................................................................... 402

Cleaning the sensors ......................................................................... 403

Other problems .................................................................................. 403

Consumables .......................................................................................... 404

Ribbon cartridges ............................................................................... 404

Print head ........................................................................................... 404

Paper products ................................................................................... 405

Paper specifications ........................................................................... 405

Journal roll dimensions ...................................................................... 405

Contents

01750182392 D CINEO C2060 / ProCash 8000 - Operating Manual XI

Journal printer TP06 ............................................................................. 407

Function elements and controls .............................................................. 408

Printer control panel ................................................................................ 409

Printer accessories ................................................................................. 410

Paper-low sensor / paper-out sensor ...................................................... 411

Paper low sensor ............................................................................... 411

Paper out sensor ............................................................................... 411

Replacing the paper roll .......................................................................... 412

Removing the paper roll ..................................................................... 412

Inserting the paper roll ....................................................................... 413

ERROR LED blinking pattern ................................................................. 418

Errors that can be remedied by the customer ................................... 418

Unrecoverable errors ......................................................................... 419

Problems ................................................................................................. 420

Paper jam .......................................................................................... 420

Remedying poor print quality ............................................................. 423

Temperature error thermo print head ................................................ 424

No supply voltage .............................................................................. 424

Cleaning the sensors ......................................................................... 425

Other problems .................................................................................. 425

Consumables .......................................................................................... 426

Thermo array ..................................................................................... 426

Paper products .................................................................................. 426

Paper specifications........................................................................... 426

Journal roll dimensions ...................................................................... 427

Printing cassette (TH60) ....................................................................... 429

Forms Printer TP20/TP22 ..................................................................... 431

Overview with intermediate transport...................................................... 431

Forms Printer TP20/TP22 ....................................................................... 432

Function elements and controlsTP20 ................................................ 433

TP22 ............................................................................................. 434

Printer control panel ..................................................................... 435

Replenishing the paper supply........................................................... 436

Removing paper ................................................................................ 438

Messages on the status display screen ............................................. 439

Error messages and warnings ...................................................... 439

Loader messages ......................................................................... 443

Malfunctions ....................................................................................... 444

Eliminating a paper jam in the drum ............................................. 444

Eliminating a paper jam in the document feed ............................. 446

Contents

XII CINEO C2060 / ProCash 8000 - Operating Manual 01750182392 D

Remedying poor print quality / paper jams caused by marking

errors (TP20) ................................................................................ 448

Remedying poor print quality / paper jams caused by marking

errors (TP22) ................................................................................ 450

Initiating a test print ....................................................................... 456

Cleaning and care .............................................................................. 462

Paper specifications ........................................................................... 463

ThermoPaper specification for TP20/TP22, Z-fold ....................... 463

Elimin. paper jam in the interm. transport (TP20) ................................... 465

Jam in the output transport ................................................................ 465

Jam in the reject transport ................................................................. 466

Emptying the reject tray........................................................................... 467

Coin Dispenser Module CM2-O-4H/8H ................................................ 469

Overview of versions ............................................................................... 469

Function elements and controls .............................................................. 470

Overall view ........................................................................................ 470

CM2-O-4H..................................................................................... 470

CM2-O-8H..................................................................................... 471

View with opened coin hoppers ......................................................... 472

CM2-O-4H..................................................................................... 472

CM2-O-8H..................................................................................... 473

Coin hopper........................................................................................ 474

Opening/closing the securing bracket ..................................................... 475

CM2-O-4H .......................................................................................... 475

Opening it ...................................................................................... 475

Closing .......................................................................................... 476

CM2-O-8H .......................................................................................... 477

Opening it ...................................................................................... 477

Closing .......................................................................................... 477

Loading the coin hoppers ........................................................................ 479

Emptying the coin hoppers ...................................................................... 481

Eliminating a coin jam ............................................................................. 483

Eliminate a coin jam in the coin chute ................................................ 483

CM2-O-4H..................................................................................... 483

CM2-O-8H..................................................................................... 484

Eliminate a coin jam in the coin hopper ............................................. 485

Cleaning and maintenance ..................................................................... 487

Cleaning the coin hopper ................................................................... 487

Cleaning the coin chute...................................................................... 489

CM2-O-4H..................................................................................... 489

CM2-O-8H..................................................................................... 490

Contents

01750182392 D CINEO C2060 / ProCash 8000 - Operating Manual XIII

Passbook module PUxx ....................................................................... 491

Anti-Skimming module II ...................................................................... 493

Anti-Skimming module II DD .................................................................. 493

General information on the functions ................................................. 493

ASKIM control and indicator .............................................................. 494

Status messages ............................................................................... 495

Resetting the alarm............................................................................ 496

Calibration .......................................................................................... 497

Anti-Skimming module II D ..................................................................... 498

ASKIM indicator ................................................................................. 498

Status messages ............................................................................... 499

Card reader CHD V3x (CHD V2CU) ...................................................... 501

Controls................................................................................................... 502

Standard version ................................................................................ 502

ACT version ....................................................................................... 503

Security Access Module (SAM) .............................................................. 504

Inserting the SAM module ...................................................................... 504

Removing an arrested ID card ................................................................ 507

Inserting an ID card ................................................................................ 509

Depositing retained ID cards .................................................................. 510

Cleaning .................................................................................................. 510

Cleaning procedure ........................................................................... 511

Troubleshooting ...................................................................................... 512

Manual card transport ........................................................................ 513

Card reject tray ...................................................................................... 515

Emptying the card reject tray .................................................................. 516

Card Reject Box .................................................................................... 517

Version overview ..................................................................................... 517

Function elements .................................................................................. 518

Opening the card reject box .................................................................... 518

Closing the card reject box ..................................................................... 520

Card reject box (removable) ................................................................ 521

Function elements .................................................................................. 521

Status display .......................................................................................... 522

Removing the card reject box ................................................................. 523

Contents

XIV CINEO C2060 / ProCash 8000 - Operating Manual 01750182392 D

Opening the card reject box .................................................................... 524

Closing the card reject box...................................................................... 525

Pushing in the card reject box ................................................................. 526

Card Reject Module .............................................................................. 527

Version overview ..................................................................................... 528

Function elements ................................................................................... 529

Opening the reject cassette .................................................................... 530

Removing ID cards.................................................................................. 531

Tilting the reject cassette ................................................................... 531

Removing the reject cassette............................................................. 531

Closing the reject cassette ...................................................................... 532

Inserting the removed reject cassette ................................................ 532

Closing the reject cassette ................................................................. 532

Faults ...................................................................................................... 534

Reject cassette full ............................................................................. 535

Photosensor dirty ............................................................................... 536

Foreign objects in the transport path ................................................. 536

Hybrid DIP Reader ................................................................................. 537

Function elements ................................................................................... 537

How the hybrid DIP reader works ........................................................... 538

Inserting an ID card ................................................................................. 538

Installation position: track facing down .............................................. 539

Installation position: track facing up ................................................... 539

Installation position: track facing right ................................................ 539

Security Access Module (SAM) ............................................................... 540

Inserting the SAM module .................................................................. 541

Problems ................................................................................................. 542

Cleaning .................................................................................................. 542

Contactless card reader Multi-ISO compact ...................................... 543

Controls ................................................................................................... 544

RF interference ....................................................................................... 544

ID card system ........................................................................................ 545

Security Access Module (SAM) ............................................................... 546

Inserting the SAM module ....................................................................... 546

Contactless card reader EMV/NFC ...................................................... 549

Controls ................................................................................................... 550

RF interference ....................................................................................... 550

ID card system ........................................................................................ 551

Contents

01750182392 D CINEO C2060 / ProCash 8000 - Operating Manual XV

Troubleshooting ...................................................................................... 552

Fingerprint sensor ................................................................................ 553

Functional components and controls ...................................................... 553

Recording a fingerprint ........................................................................... 554

Preparations for recording ...................................................................... 555

Cleaning .................................................................................................. 555

Barcode Reader 2D BR 02 ................................................................... 557

Important safety precautions .................................................................. 557

Problems ................................................................................................. 560

Technical data ........................................................................................ 561

Electrical characteristics .................................................................... 561

Optical characteristics ....................................................................... 561

Light source for the image sensor ................................................ 561

Projection (DOE) .......................................................................... 561

Image sensor ................................................................................ 562

Physical characteristics ..................................................................... 562

Ambient conditions ............................................................................ 562

Safety standards ................................................................................ 562

Decoding ............................................................................................ 563

Relay Panel for External Features USB .............................................. 565

Technical data ........................................................................................ 566

Description of connectors .................................................................. 566

Terminal diagram ............................................................................... 568

Sample connection of customer feedback ........................................ 568

UPS PW 5115 RM 1500VA .................................................................... 569

Overview of versions............................................................................... 570

Controls................................................................................................... 571

Front side ........................................................................................... 571

Rear side (120 V version) .................................................................. 572

Rear side (230 V version) .................................................................. 573

Initial operation ........................................................................................ 574

Operating the UPS .................................................................................. 575

Switching on ...................................................................................... 575

Switching off ...................................................................................... 576

Standby mode .................................................................................... 576

Self-test .............................................................................................. 577

Indications/Troubleshooting .................................................................... 578

Resetting the alarm............................................................................ 578

Contents

XVI CINEO C2060 / ProCash 8000 - Operating Manual 01750182392 D

Malfunctions ....................................................................................... 579

Replace the battery ................................................................................. 583

Maintenance and service ........................................................................ 586

Technical Data ........................................................................................ 587

Malfunctions .......................................................................................... 589

General information................................................................................. 589

Malfunctions of the safe .......................................................................... 589

Cleaning, Service and Maintenance .................................................... 591

Cleaning the housing .............................................................................. 591

Cleaning the keyboards/keypads ............................................................ 592

Cleaning the LCD monitor ....................................................................... 592

LCD monitor with OP functionality .......................................................... 592

Appendix ................................................................................................ 595

Technical data ......................................................................................... 595

Electrical characteristics of the supply network ................................. 595

Device conditions ............................................................................... 596

Installations specifications with 4-cassette dispenser ........................ 597

Installations specifications with 5-cassette dispenser ........................ 598

Environmental conditions .............................................................. 599

Climatic environmental conditions in acc. with EN 60721 ............ 599

Mechanical environmental conditions in acc. with EN 60721 ....... 599

Noise emission in acc. with EN 27779 .......................................... 600

Consumables .......................................................................................... 601

Orders ................................................................................................ 601

Loading aid ......................................................................................... 601

Emergency set Inking packaging, clothing ......................................... 601

Approved cleaning materials ................................................................... 602

Orders ................................................................................................ 602

Notes on using cleaning materials ..................................................... 602

General purpose cleaning material .................................................... 603

Cleaning material for special components ......................................... 603

Compliance with standards and certifications ......................................... 604

Standards met .................................................................................... 604

Conformity .......................................................................................... 604

Notes concerning radio interference suppression and electrical

safety .................................................................................................. 604

Certification for data transmission ..................................................... 605

FCC rules and Canadian Standard ICES - 003 ................................. 605

UL 291, Level 1 (security Container) .................................................. 605

Page is loading ...

Diebold Nixdorf CS 2060 Operating instructions

This manual is also suitable for

Diebold Nixdorf CS 2060 Operating instructions

Related papers

Other documents