Wincor Nixdorf C2120 Cash Drawer Operating instructions

Brand: Wincor Nixdorf

Model: C2120 Cash Drawer

Type: Operating instructions

C2120

Cashdrawer

Operator Manual

01750371903 A

Customer/Partner Use

This document is property of Diebold Nixdorf and is intended for customer/partner use. A written

license agreement with Diebold Nixdorf is not required to use this material.

This document contains proprietary information of Diebold Nixdorf, Incorporated or its subsidiaries (col-

lectively “Diebold Nixdorf“) and may include information that is protected by copyright, trademark and

patent laws in the US, Germany, and globally. All rights, including rights created by patent grants or reg-

istration of a utility model or design, are reserved.

No part of this document may be translated, reproduced, stored in a retrieval system, or transmit-

ted, in any form or by any means: electronic, mechanical, photocopying, recording, or otherwise,

without prior written permission from Diebold Nixdorf. Any violations of the foregoing may give

rise to a claim for damages.

If the document pages state the information is confidential (or words of similar import), then this

document is intended solely for the use of the employees or other personnel of Diebold Nixdorf

unless expressly authorized in writing by Diebold Nixdorf. Other uses of this information without

the express written consent of Diebold Nixdorf are prohibited.

This document should be treated as confidential material for security reasons. Any unauthorized

disclosure or use of confidential material may violate the U.S. Theft of Trade Secrets provisions

of Section 1832 of Title 18 of the United States Code as well as comparable laws in other jurisdic-

tions throughout the world, and may be punishable by fine and imprisonment.

This document and the information contained herein are provided AS IS AND WITHOUT WARRANTY.

In no event shall Diebold Nixdorf or its suppliers be liable for any special, indirect, or consequential dam-

ages of any nature resulting from the use of information in this manual. The information contained in this

document is subject to change without notice. When using the document for system implementation,

please call your authorized Diebold Nixdorf sales or service representative for any applicable changes.

Any trademarks, service marks, product names or company names not owned by Diebold Nixdorf, that

appear in this document are used for informational purposes only, and Diebold Nixdorf claims no rights

thereto, nor does such use indicate any affiliation with or any endorsement of Diebold Nixdorf or Diebold

Nixdorf products by the owners thereof.

Your use of this document and/or any of the information contained herein constitutes your agreement to

all of the terms stated on this page.

01750371903 A

Table-1: Document History

Date Remarks

03/2023 Original edition

01750371903 A

iii

Table of Contents

1 Introduction ................................................................................................................................ 1-1

1.1 Symbols used in this Manual ............................................................................................ 1-1

1.2 Section-Specific Warning Notes ........................................................................................ 1-2

1.3 Signs, Markings and Symbols ........................................................................................... 1-3

2 Description ................................................................................................................................. 2-1

2.1 The Cash Trays ................................................................................................................. 2-2

2.2 PIN Assignments ............................................................................................................... 2-4

2.2.1 PIN Assignment of the RJ12 Connector ............................................................. 2-4

2.3 Technical Data................................................................................................................... 2-5

3 Installation of Cash Drawer....................................................................................................... 3-1

4 Operation .................................................................................................................................... 4-1

4.1 Setting up the Compact Cash Drawer ............................................................................... 4-1

4.1.1 Removing the Cash Trays from the Drawer ....................................................... 4-1

4.1.2 Adjusting the Banknote Partitions....................................................................... 4-2

4.1.3 Adjusting the Coin Trays..................................................................................... 4-3

4.1.4 Inserting the Cash Trays into the Drawer ........................................................... 4-3

4.1.5 Security Cover (option) ....................................................................................... 4-4

4.1.6 Activating the C2120........................................................................................... 4-6

4.1.7 Key Positions ...................................................................................................... 4-7

5 Appendix..................................................................................................................................... 5-1

5.1 Manufacturer’s declaration and approval........................................................................... 5-1

5.2 Environmental Protection................................................................................................... 5-3

6 Disposal ...................................................................................................................................... 6-1

01750371903 A

Table of Contents

List of Figures

Figure 2-1 Cash drawer - Front view ...................................................................................... 2-1

Figure 2-2 Cash tray - Front view ........................................................................................... 2-2

Figure 2-3 Check depositor - Front view................................................................................. 2-3

Figure 2-4 RJ12 Connector..................................................................................................... 2-4

Figure 3-1 Measurements for installation................................................................................ 3-2

Figure 3-2 Position of bore hole and screw ............................................................................ 3-3

Figure 4-1 Removing the Cash Tray....................................................................................... 4-1

Figure 4-2 Adjusting Banknote Partitions................................................................................ 4-2

Figure 4-3 Adjusting coin partition .......................................................................................... 4-3

Figure 4-4 Removing and inserting coin partitions.................................................................. 4-3

Figure 4-5 Locking of Security cover ...................................................................................... 4-4

Figure 4-6 Turning the key to open security cover.................................................................. 4-5

Figure 4-7 Removing security cover ....................................................................................... 4-5

Figure 4-8 Connection system of cash drawer ....................................................................... 4-6

Figure 4-9 Position of the key in cash drawer......................................................................... 4-7

Figure 4-10 Key Positions......................................................................................................... 4-7

01750371903 A

Table of Contents

List of Tables

Table -1 Document History .................................................................................................. -iii

Table 1-1 Warning signs used ............................................................................................... 1-3

Table 1-2 Mandatory signs used ........................................................................................... 1-3

01750371903 A

1 Introduction

1.1

1.1 Symbols used in this Manual

●Text following a bullet point represents an item in a list.

‚‘ Text in simple quotation marks relates to components/mounting parts which are in-

cluded in the delivery package.

Prerequisite that must be fulfilled before an action.

Numbered instructions describe activities which must be carried out in the specified se-

quence

Intermediate result of an action.

Action successfully completed.

01750371903 A

1-1

Introduction

1.2

1.2 Section-Specific Warning Notes

DANGER

This warning note describes a hazard with a high degree of risk which, if not avoided,

will result in death or grave bodily injury.

WARNING

This warning note describes a hazard with a medium degree of risk which, if not

avoided, could result in death or grave bodily injury.

CAUTION

This warning note describes a hazard with a low degree of risk which, if not avoided,

could result in slight or minor bodily injury.

NOTE

This note provides application tips and information that help prevent errors and material

damage.

01750371903 A

1-2

Introduction

1.3

1.3 Signs, Markings and Symbols

Table1-1: Warning signs used

Warning signs

General

warning sign

Warning of

electrical voltage

Warning of

hot surface

Warning of

hand injuries

Warning of

counter-rotating

rollers

Warning of

sharp

object

Warning of

laser radiation

Warning of

obstacles

in the head area

Table1-2: Mandatory signs used

Mandatory signs

Observe

the manual

Wear

eye protection

Wear

foot protection

Wear

hand protection

Pull

main plug

Wear

ear protection

Ground

before use

01750371903 A

1-3

2 Description

The C2120 compact cash drawer is distinguished by a combination of a small footprint and a large ca-

pacity. Thus, it harmonizes with the new generation of POS systems, which are likewise characterized

by their small space requirement. The C2120 offers sophisticated operation and a high standard of secu-

rity.

The cash drawer opens as far as the coin compartment area. It can then be pulled out manually as far as

it is necessary for working. It is mounted on rolls and thus moves extremely smoothly.

The cash trays can be completely removed from the cash drawer and optionally be equipped with a lock-

able cover.

The C2120 compact cash drawer shall be connected directly to the cash drawer interfaces of the

BEETLE system family and to the DN POS printers only.

Figure2-1: Cash drawer - Front view

Advantages at a Glance:

• Drawer opens in forward direction

• Small space requirement

• Large capacity

• Adjustable money compartments

• Separate check slot

• Drawer can also be used as a safe

• Security lock

• Security cover (option)

01750371903 A

2-1

Description

2.1

2.1 The Cash Trays

The cash tray at the front is arranged in two layers. There are eight-coin trays on the top layer. Behind

there is a tray with possibility of four or five bank note compartments based on sales order.

Figure2-2: Cash tray - Front view

01750371903 A

2-2

Description

The bottom layer of the front coin tray contains a compartment for checks. The checks can be easily de-

posited through a slot in the front cover into the compartment without opening the drawer.

Figure2-3: Check depositor - Front view

01750371903 A

2-3

Description

2.2

2.2 PIN Assignments

2.2.1

2.2.1 PIN Assignment of the RJ12 Connector

Figure2-4: RJ12 Connector

1Frame ground 4+24V DC

2Opening pulse for cash drawer 5N.C.

3Status cash drawer 6Signal ground

01750371903 A

2-4

Description

2.3

2.3 Technical Data

Size

width x height x depth

413 x 100 x 418 mm (16.3’’ x 3.9’’ x 16.5’’)

Weight Approx. 6.6 kg (14.6 lbs)

Money compartments 4 (optional 5) Bill / 8 Coin

Drawer opening method Solenoid release method and manual opening

Solenoid specification Rated voltage DC 24 V ± 2 V, 80~120 ms

Coil resistance 24 Ohm +/- 10%

Rated current max. 1.0A

Connector type RJ12

Operating temperature -5 °C to 50 °C, max. 80% RH

Storage temperature -25 °C to 65 °C, max. 90% RH

Relative humidity 10% to 90% RH (no condensation)

Cable 3 m (118’’) or 5 m (196.9”)

01750371903 A

2-5

3 Installation of Cash Drawer

CAUTION

Risk of injury from falling

Injuries of feet possible.

lThe cash drawer must be securely bolted to the desk before use. If it is not se-

curely fixed, the cash drawer is tipping over when opened.

NOTE

All dimensions are specified in millimeters (and inches). The system views are not

drawn to scale.

NOTE

Securing of Cash Drawer

The checkout desk must be level and horizontal. The securing screws must not exceed

the specified length in order to ensure trouble-free operation of the cash drawer!

01750371903 A

3-1

Installation of Cash Drawer

305 (12 ")

418 (16.45")

36.6 (1.44")

120.8 (4.75")

44.9 (1.76")

413 (16.25")

90 (3.54")

Figure3-1: Measurements for installation

01750371903 A

3-2

Installation of Cash Drawer

The drawer is secured at two bore holes

1. Mark the required bore hole points on the checkout desk.

2. Use a drill bit of diameter 6 mm for the bore holes through the checkout desk.

3. The cash drawer is secured from below and through the checkout desk.

NOTICE!M6 screws of length L are required for the bore holes at two positions, whereby L = desk thick-

ness (T) + 8 mm (pictured)

Figure3-2: Position of bore hole and screw

Fixing bolts for these screws can be found at the cash drawer. When screwed in, the screws must not

protrude, so that they do not scrape on the cash insert. If necessary, use washers to prevent the screws

protruding.

01750371903 A

3-3

4 Operation

4.1

4.1 Setting up the Compact Cash Drawer

4.1.1

4.1.1 Removing the Cash Trays from the Drawer

Figure4-1: Removing the Cash Tray

1. Open the cash drawer to the front as far as it

will go to remove the cash trays from the

drawer.

2. Pull out the cash trays to the top.

01750371903 A

4-1

Operation

4.1.2

4.1.2 Adjusting the Banknote Partitions

Rear Side

Figure4-2: Adjusting Banknote Partitions

NOTICE!The banknote partitions are fixed with

two flexible hooks (2) at the bottom.

1. Disengage them upwards.

2. Remove the partitions.

3. Adjust the banknote partitions accordingly.

4. Insert the banknote partitions (1) according to

the width of the compartments.

NOTICE!The banknote partitions must be fixed at

the bottom with two flexible hooks (2).

5. Press the partitions gently down to lock them

in.

01750371903 A

4-2

Operation

4.1.3

4.1.3 Adjusting the Coin Trays

Figure4-3: Adjusting coin partition

NOTICE!The area of the coin trays (pictured) can

be customized.

1. Remove the correspondent coin partitions.

Rear Side

Figure4-4: Removing and inserting coin partitions

NOTICE!The coin partitions are fixed by one flex-

ible hook (2) at the bottom.

2. Disengage them upwards.

3. Remove the partitions.

4. Insert the coin partitions (1) according to the

new width of the compartments.

NOTICE!The coin partitions must be fixed at the

bottom with one flexible hook (2).

5. Press the partitions gently down to lock them

in.

4.1.4

4.1.4 Inserting the Cash Trays into the Drawer

1. Open the cash drawer to the front as far as it will go.

2. Insert the cash trays downwards behind the front side.

01750371903 A

4-3

Page is loading ...

Wincor Nixdorf C2120 Cash Drawer Operating instructions

Wincor Nixdorf C2120 Cash Drawer Operating instructions

Wincor Nixdorf C2120 Cash Drawer Operating instructions

Related papers

Other documents