Diebold Nixdorf CCDM V2 (ActivMedia) Operating instructions

Brand: Diebold Nixdorf

Model: CCDM V2 (ActivMedia)

Type: Operating instructions

Diebold Nixdorf CCDM V2 (ActivMedia) is designed to provide a secure and efficient way to manage cash. With its advanced features and capabilities, it can help you to improve your cash handling operations and reduce your risk of loss. Some of the key features of the Diebold Nixdorf CCDM V2 (ActivMedia) include:

High-speed note processing: The Diebold Nixdorf CCDM V2 (ActivMedia) can process up to 1,000 notes per minute, making it one of the fastest note processing devices on the market.
High-capacity storage: The Diebold Nixdorf CCDM V2 (ActivMedia) has a large capacity storage unit that can hold up to 4,000 notes. This means that you can process large volumes of cash without having to worry about running out of space.

High-speed note processing: The Diebold Nixdorf CCDM V2 (ActivMedia) can process up to 1,000 notes per minute, making it one of the fastest note processing devices on the market.
High-capacity storage: The Diebold Nixdorf CCDM V2 (ActivMedia) has a large capacity storage unit that can hold up to 4,000 notes. This means that you can process large volumes of cash without having to worry about running out of space.

CCDM V2 Split Cassette

Operator Manual

01750330722 B

Legal Disclaimer

This document contains proprietary information of Diebold Nixdorf, Incorporated or its subsidiaries (col-

lectively “Diebold Nixdorf“) and may include information that is protected by copyright, trademark and

patent laws in the US, Germany, and globally. All rights, including rights created by patent grants or reg-

istration of a utility model or design, are reserved.

No part of this document may be translated, reproduced, stored in a retrieval system, or transmit-

ted, in any form or by any means: electronic, mechanical, photocopying, recording, or otherwise,

without prior written permission from Diebold Nixdorf. Any violations of the foregoing may give

rise to a claim for damages.

If the document pages state the information is confidential (or words of similar import), then this

document is intended solely for the use of the employees or other personnel of Diebold Nixdorf

unless expressly authorized in writing by Diebold Nixdorf. Other uses of this information without

the express written consent of Diebold Nixdorf are prohibited.

This document should be treated as confidential material for security reasons. Any unauthorized

disclosure or use of confidential material may violate the U.S. Theft of Trade Secrets provisions

of Section 1832 of Title 18 of the United States Code as well as comparable laws in other jurisdic-

tions throughout the world, and may be punishable by fine and imprisonment.

This document and the information contained herein are provided AS IS AND WITHOUT WARRANTY.

In no event shall Diebold Nixdorf or its suppliers be liable for any special, indirect, or consequential dam-

ages of any nature resulting from the use of information in this manual. The information contained in this

document is subject to change without notice. When using the document for system implementation,

please call your authorized Diebold Nixdorf sales or service representative for any applicable changes.

Any trademarks, service marks, product names or company names not owned by Diebold Nixdorf, that

appear in this document are used for informational purposes only, and Diebold Nixdorf claims no rights

thereto, nor does such use indicate any affiliation with or any endorsement of Diebold Nixdorf or Diebold

Nixdorf products by the owners thereof.

Your use of this document and/or any of the information contained herein constitutes your agreement to

all of the terms stated on this page.

01750330722 B

Table of contents

1 Introduction ................................................................................................................................ 1-1

1.1 Symbols used in this manual .............................................................................................1-1

1.2 Section-specific warning notes...........................................................................................1-2

1.3 Signs, labels and symbols..................................................................................................1-3

2 Safety .......................................................................................................................................... 2-1

2.1 General safety precautions for the system.........................................................................2-1

2.2 General safety instructions for the component...................................................................2-4

3 Description ................................................................................................................................. 3-1

3.1 Overview ............................................................................................................................3-1

3.2 Technical Data ...................................................................................................................3-2

4 Operation .................................................................................................................................... 4-1

4.1 Removing the cassette.......................................................................................................4-1

4.2 Opening the cassette .........................................................................................................4-2

4.3 Removing banknotes .........................................................................................................4-4

4.4 Removing checks...............................................................................................................4-6

4.5 Closing the cassette...........................................................................................................4-7

4.6 Inserting cassette ...............................................................................................................4-8

5 Troubleshooting......................................................................................................................... 5-1

5.1 Jam removal.......................................................................................................................5-1

5.1.1 Clearing a banknote jam ..................................................................................... 5-1

01750330722 B

iii

Table of contents

Illustration directory

Figure 3-1 Overview of split cassette......................................................................................... 3-1

Figure 4-1 Using the loading aid................................................................................................ 4-2

Figure 4-2 Opening the lock ...................................................................................................... 4-2

Figure 4-3 Opening cassette cover............................................................................................ 4-3

Figure 4-4 Unlocking lifting floor ................................................................................................ 4-4

Figure 4-5 Removing the banknotes.......................................................................................... 4-4

Figure 4-6 Removing checks ..................................................................................................... 4-6

Figure 4-7 Closing cassette cover ............................................................................................. 4-7

Figure 4-8 Closing lock .............................................................................................................. 4-7

Figure 5-1 Removing jammed banknotes in the transport area ................................................ 5-1

01750330722 B

1 Introduction

This operating manual is intended to make it easier for you to get to know the system and/or the compo-

nent in question and for you to use its range of applications.

This manual contains important information regarding how to operate the system/component in a safe,

appropriate and economical manner. Your attention will help to reduce hazards, repair costs and down-

time, as well as to increase the reliability and lifetime of the respective product.

Existing national regulations for accident prevention and environmental protection are also valid.

The operator should ensure that every person working on or with the system/component reads and uti-

lizes this manual.

This manual must be kept in a designated and easily accessible location and it must be referred to in the

event of even the slightest doubt.

1.1

1.1 Symbols used in this manual

●Text following a dash represents an item in a list.

"" Refers to other chapters or sections.

'' Text in apostrophes relates to equipment/mounting parts which are included

in the delivery package.

Text Texts in small capitals designate pushbuttons/switches on a control or

switches that are to be actuated in the software.

Numbered procedural instructions describe activities which must be carried

out in the specified order.

01750330722 B

1-1

Introduction

1.2

1.2 Section-specific warning notes

DANGER

This warning note describes a hazard with a high degree of risk which, if not avoided, will

result in death or grave bodily injury.

WARNING

This warning note describes a hazard with a medium degree of risk which, if not avoided,

could result in death or grave bodily injury.

CAUTION

This warning note describes a hazard with a low degree of risk which, if not avoided, could

result in slight or minor bodily injury.

NOTE

This note provides application tips and information that help prevent errors and material

damage.

01750330722 B

1-2

Introduction

1.3

1.3 Signs, labels and symbols

The following labels can be used in these instructions, on the system or on the component.

Table1-1: Warning signs used

Warning signs

General

warning sign

Warning of

electric voltage

Warning of

hot surfaces

Warning of

hand injuries

Warning of

feed risk

Warning of

cut injuries

Warning of

laser beam

Warning of

obstacles in the

head area

Table1-2: Used mandatory signs

Mandatory signs

Use

hearing protection

Use

protection eyewear

Use

safety footwear

Use

protective gloves

Pull

mains plug

Read

manual

01750330722 B

1-3

2 Safety

2.1

2.1 General safety precautions for the system

This system complies with the relevant safety regulations for information processing equipment.

NOTE

Read this entire manual carefully in order to obtain a thorough knowledge with respect to

the system and the components, in addition to their operation and maintenance.

Operate the system and the components correctly in accordance with this manual in order

to avoid injuries and damage to the plant.

Keep this manual available and consult it for guidance when you are unsure about how to

carry out one or another of the procedures.

DANGER

Electrical voltage

Risk of fatal injury through contact with parts carrying electrical voltage! Switch the system

off before performing any cleaning or maintenance tasks.

lSwitch off the power switch for the power distributor.

lSwitch off the UPS, if installed.

lDisconnect the mains connection, if installed, between the UPS (Uninterruptible

Power Supply) and the system itself (see section "General power interruption" in the

operating manual).

lDisconnect the connector of the power supply cable from the electrical socket in-

stalled by the building contractor.

WARNING

Risk of impact

Be careful not to injure your head when the control panel or rear door is opened.

lMove carefully when the control panel or the rear door is opened.

DANGER

Adverse weather conditions

Make sure that no water/liquids (e.g. rain, snow etc.) gets into the open system and the

exposed components, especially under adverse weather conditions, since that could pose

a danger to your life.

Be sure to take suitable precautions when working on an open system (e.g. by covering

components where necessary) so that fluid cannot enter the open system.

01750330722 B

2-1

Safety

• Observe the warning and information labels on the system.

• Unless otherwise stated, grasp the components only by the green ledge when handling them.

• This system is equipped with a safety-tested power cable which must be connected to a suitable

grounded socket only.

• Always hold the plug when removing the power cable. Never pull on the cable itself.

• Lay all connecting cables in such a way that they will not be stepped on or tripped over, damaged or

crushed in any way.

• Have damaged power cables replaced immediately.

• Make sure that there is always free access to the electrical sockets used or to the electrical circuit-

breakers of the house installation.

DANGER

In case of an emergency (e.g. damaged cabinets, controls or power cables, liquids or for-

eign objects in the system) take the following steps:

Switch the system voltage-free immediately by:

lSwitching off the automatic circuit breaker or removing the fuse insert from the fuse

holder in the distributor box of the house installation.

lDisconnecting the plug of the power supply cable from the grounded socket in the

building installation.

lInterrupting the power connection between the UPS (uninterruptible power supply)

and the system (see chapter "Introduction", section "General power interruption" in

the operating manual);

lFor further system-specific notes, please refer to the operating manuals.

lInform the customer service responsible for you.

• Never connect or disconnect data transmission lines during a thunderstorm.

• Always keep the system’s ventilation openings free from obstruction to ensure proper ventilation and

to prevent malfunctions resulting from overheating.

• Only use accessories and extension components that have been approved by us. Nonobservance

can result in damage to the system or violations of regulations concerning safety, radio interference

and ergonomical requirements.

• Note that there are only safety extra-low voltage circuits (SELV circuits) if you want to feed voltage

from an external source into prepared cables to install additional electronics (e. g. EMA connection).

• To clean the system only use cleaning agents approved by Diebold Nixdorf (see chapter "Cleaning,

Service and Maintenance" in the operating manual).

• Components with adjustable light effects are integrated in this product. Repetition frequencies be-

tween 5 Hz and 40 Hz should be avoided as certain light frequencies or flickering light sources can

cause epileptic seizures in some individuals.

Also avoid light reflections and synchronize the cycles wherever possible. Ensure that monitors' re-

fresh rates are as high as possible.

01750330722 B

2-2

Safety

Repairs

DANGER

Repair work on the system or on the components may be carried out only by authorized

specialist staff. Unauthorized opening of the system or repair work carried out improperly

could result in considerable danger to the user. In case of noncompliance, Diebold Nixdorf

excludes all liability.

Lithium batteries

DANGER

Danger of fire and explosion

The handling and the replacement should only be performed by authorized service per-

sonnel which was trained by Diebold Nixdorf

There is danger of fire or explosion if the batteries are handled improperly. It is therefore

important to note the following points:

lAvoid short circuits

lNever recharge the battery

lAvoid temperatures above +100°C (+212°F).

lDo not attempt to open the battery by force

lDo not allow the battery to come into contact with water or fire

lThe battery should only be replaced with the same or an equivalent type recom-

mended by Diebold Nixdorf (see chapter “Appendix,” section “Consumables”). Dis-

pose of used batteries in compliance with national regulations and the manufacturer's

specifications.

01750330722 B

2-3

Safety

2.2

2.2 General safety instructions for the component

NOTE

Read this entire manual carefully in order to obtain a thorough knowledge with respect to

the system and the components, in addition to their operation and maintenance.

Operate the system and the components correctly in accordance with this manual in order

to avoid injuries and damage to the plant.

Keep this manual available and consult it for guidance when you are unsure about how to

carry out one or another of the procedures.

DANGER

Electrical voltage

Risk of fatal injury through contact with parts carrying electrical voltage! Switch the system

off before performing any cleaning or maintenance tasks.

lSwitch off the power switch for the power distributor.

lSwitch off the UPS, if installed.

lDisconnect the mains connection, if installed, between the UPS (Uninterruptible

Power Supply) and the system itself (see section "General power interruption" in the

operating manual).

lDisconnect the connector of the power supply cable from the electrical socket in-

stalled by the building contractor.

Repairs

DANGER

Repair work on the system or on the components may be carried out only by authorized

specialist staff. Unauthorized opening of the system or repair work carried out improperly

could result in considerable danger to the user. In case of noncompliance, Diebold Nixdorf

excludes all liability.

01750330722 B

2-4

3 Description

3.1

3.1 Overview

Figure3-1: Overview of split cassette

1Cover for banknote stacking area 5Recessed grip for check pressure plate

2Unload knob for checks 6Release for lifting floor for banknotes

3Maintenance flap 7Lifting floor for banknotes

4Check pressure plate

01750330722 B

3-1

Description

3.2

3.2 Technical Data

Banknotes Checks

Stacking Height: 270 mm (10.63 in) 40 mm (1.57 in)

Number of media: < 2700 *1< 400 *1

Length: 120 mm (4.72 in) – 156 mm

(6.14 in)

140 mm (5.51 in) – 225 mm (8.86 in)

Width: 60 mm (2.36 in) – 70 mm (2.76

in)

70 mm (2.76 in) – 105 mm (4.13 in)

Surface Weight: 70 g/m² - 120 g/m² 65 g/m² - 125 g/m²

Thickness: 0,07 mm – 0,12 mm 0,07 mm – 0,12 mm

*1 depending on the thickness and quality of the media.

01750330722 B

3-2

4 Operation

4.1

4.1 Removing the cassette

1. Remove the split cassette(1).

01750330722 B

4-1

Operation

4.2

4.2 Opening the cassette

Figure4-1: Using the loading aid

1. Place the cassette on the loading aid.

(Can be ordered as an option - Order num-

ber of the loading aid: 7595300720).

Figure4-2: Opening the lock

Version with lock:

2. Turn the key clockwise as far as possible (1).

01750330722 B

4-2

Operation

Figure4-3: Opening cassette cover

3. Press the latch (1).

4. Open the cover of the split cassette (2).

01750330722 B

4-3

Operation

4.3

4.3 Removing banknotes

Removing the banknotes

NOTE

Internal components can be damaged

Make sure that the lifting floor is unlocked before moving it (see Section4.3).

1. Open the cover of the split cassette (see Section4.2).

Figure4-4: Unlocking lifting floor

2. Pinch green lever to unlock the lifting

floor(1).

3. Move the lifting floor downwards(2).

Figure4-5: Removing the banknotes

4. Remove the banknotes from the cassette.

01750330722 B

4-4

Operation

5. Unlock the lifting floor (see Section4.3).

6. Push the lifting floor upwards.

01750330722 B

4-5

Operation

4.4

4.4 Removing checks

1. Open the cover of the split cassette (see Section4.2).

Figure4-6: Removing checks

2. Turn the green unload knob(1) 360° in the direction of the arrow to remove the check that is still in

the transport.

3. Slide the check pressure plate(2) to the side.

4. Remove the checks from the cassette (3).

NOTE

The check that was inserted most recently will remain in the transport and will have to be

extracted manually using green unload knob.

01750330722 B

4-6

Operation

4.5

4.5 Closing the cassette

Figure4-7: Closing cassette cover

1. Close the cassette cover (1).

Figure4-8: Closing lock

Version with lock:

2. Turn the key counterclockwise as far as pos-

sible (1).

01750330722 B

4-7

Page is loading ...

Diebold Nixdorf CCDM V2 (ActivMedia) Operating instructions

Brand: Diebold Nixdorf

Model: CCDM V2 (ActivMedia)

Type: Operating instructions

High-speed note processing: The Diebold Nixdorf CCDM V2 (ActivMedia) can process up to 1,000 notes per minute, making it one of the fastest note processing devices on the market.
High-capacity storage: The Diebold Nixdorf CCDM V2 (ActivMedia) has a large capacity storage unit that can hold up to 4,000 notes. This means that you can process large volumes of cash without having to worry about running out of space.

Download PDF

report

Diebold Nixdorf CCDM V2 (ActivMedia) Operating instructions

Diebold Nixdorf CCDM V2 (ActivMedia) Operating instructions

Related papers

Other documents