Diebold Nixdorf iPos+ I/O Hub Operating instructions

Brand: Diebold Nixdorf

Model: iPos+ I/O Hub

Type: Operating instructions

iPOS+ I/O Hub

Operator Manual

01750372571 A

Customer/Partner Use

This document is property of Diebold Nixdorf and is intended for customer/partner use. A written

license agreement with Diebold Nixdorf is not required to use this material.

This document contains proprietary information of Diebold Nixdorf, Incorporated or its subsidiaries (col-

lectively “Diebold Nixdorf“) and may include information that is protected by copyright, trademark and

patent laws in the US, Germany, and globally. All rights, including rights created by patent grants or reg-

istration of a utility model or design, are reserved.

No part of this document may be translated, reproduced, stored in a retrieval system, or transmit-

ted, in any form or by any means: electronic, mechanical, photocopying, recording, or otherwise,

without prior written permission from Diebold Nixdorf. Any violations of the foregoing may give

rise to a claim for damages.

If the document pages state the information is confidential (or words of similar import), then this

document is intended solely for the use of the employees or other personnel of Diebold Nixdorf

unless expressly authorized in writing by Diebold Nixdorf. Other uses of this information without

the express written consent of Diebold Nixdorf are prohibited.

This document should be treated as confidential material for security reasons. Any unauthorized

disclosure or use of confidential material may violate the U.S. Theft of Trade Secrets provisions

of Section 1832 of Title 18 of the United States Code as well as comparable laws in other jurisdic-

tions throughout the world, and may be punishable by fine and imprisonment.

This document and the information contained herein are provided AS IS AND WITHOUT WARRANTY.

In no event shall Diebold Nixdorf or its suppliers be liable for any special, indirect, or consequential dam-

ages of any nature resulting from the use of information in this manual. The information contained in this

document is subject to change without notice. When using the document for system implementation,

please call your authorized Diebold Nixdorf sales or service representative for any applicable changes.

Any trademarks, service marks, product names or company names not owned by Diebold Nixdorf, that

appear in this document are used for informational purposes only, and Diebold Nixdorf claims no rights

thereto, nor does such use indicate any affiliation with or any endorsement of Diebold Nixdorf or Diebold

Nixdorf products by the owners thereof.

Your use of this document and/or any of the information contained herein constitutes your agreement to

all of the terms stated on this page.

01750372571 A

Table of Contents

1 Introduction ................................................................................................................................ 1-1

1.1 Symbols used in this Manual ............................................................................................ 1-1

1.2 Section-Specific Warning Notes ........................................................................................ 1-2

2 Safety Precautions..................................................................................................................... 2-1

3 Description ................................................................................................................................. 3-1

3.1 Interfaces ........................................................................................................................... 3-1

3.2 Dimensions ........................................................................................................................ 3-3

3.3 AC Power Adapter ............................................................................................................. 3-4

3.4 Technical Data................................................................................................................... 3-5

4 Installation .................................................................................................................................. 4-1

4.1 Cabling............................................................................................................................... 4-1

5 Certifications of the Manufacturer ........................................................................................... 5-1

6 Disposal ...................................................................................................................................... 6-1

01750372571 A

iii

Table of Contents

List of Figures

Figure 3-1 Hub-Interfaces, Front............................................................................................. 3-1

Figure 3-2 Hub-Interfaces, Back ............................................................................................. 3-2

Figure 3-3 Dimensions of I/O Hub .......................................................................................... 3-3

Figure 3-4 AC power adapter.................................................................................................. 3-4

Figure 4-1 4-pin power supply connector................................................................................ 4-1

01750372571 A

Table of Contents

List of Tables

Table -1 Document History .................................................................................................. -vi

01750372571 A

Table-1: Document History

Date Remarks

06/2023 Original edition

01750372571 A

1 Introduction

This operator manual is intended to make it easier for you to get to know the component in question and

for you to use its range of applications.

This manual contains important information regarding how to operate the component in a safe, appropri-

ate and economical manner. Your attention will help to reduce hazards, repair costs and downtime, as

well as to increase the reliability and service life of the respective product.

Existing national regulations for accident prevention and environmental protection are also valid.

The operator should ensure that every person working on or with the component reads and utilizes this

manual.

This manual must be kept in a designated and easily accessible location and it must be referred to in the

event of even the slightest doubt.

1.1

1.1 Symbols used in this Manual

●Text following a bullet point represents an item in a list.

‚‘ Text in simple quotation marks relates to components/mounting parts which are in-

cluded in the delivery package.

Prerequisite that must be fulfilled before an action.

Numbered instructions describe activities which must be carried out in the specified se-

quence

Intermediate result of an action.

Action successfully completed.

01750372571 A

1-1

Introduction

1.2

1.2 Section-Specific Warning Notes

DANGER

This warning note describes a hazard with a high degree of risk which, if not avoided,

will result in death or grave bodily injury.

WARNING

This warning note describes a hazard with a medium degree of risk which, if not

avoided, could result in death or grave bodily injury.

CAUTION

This warning note describes a hazard with a low degree of risk which, if not avoided,

could result in slight or minor bodily injury.

NOTE

This note provides application tips and information that help prevent errors and material

damage.

01750372571 A

1-2

2 Safety Precautions

DANGER

Repairs

Repair work on the system or on the components may be carried out only by authorized

specialist staff. Unauthorized opening of the system or repair work carried out improp-

erly could result in considerable danger to the user.

In case of noncompliance, excludes all liability.

01750372571 A

2-1

3 Description

3.1

3.1 Interfaces

Figure3-1: Hub-Interfaces, Front

1COM5 4PUSB 12V

2COM6 5PUSB 24V

3PUSB 12V 6DC 24V IN

01750372571 A

3-1

Description

Figure3-2: Hub-Interfaces, Back

1DC 24V Out 32nd HDD Power (Obsolete)

2USB Upstream

01750372571 A

3-2

Description

3.2

3.2 Dimensions

NOTE

All dimensions are specified in millimeters (and inches). The system views are not

drawn to scale.

154 (6.06")

174 (6.85")

67 (2.63")

72.6 (2.85")

28.7 (1.12")

Figure3-3: Dimensions of I/O Hub

01750372571 A

3-3

Description

3.3

3.3 AC Power Adapter

Figure3-4: AC power adapter

1DC power out 2Power indicator

3AC power adapter 4AC power plug

The external power supply is applicable for common line voltage.

It automatically adjusts itself to the particular voltage.

01750372571 A

3-4

Description

3.4

3.4 Technical Data

NOTE

Maximum load

Please note that a maximum load of 105W is permitted for each combination of inter-

face connections.

Power Input DC 24V IN 24V DC (connect to 24V power supply)

User Interface COM5 Rated voltage: 12V, 5V

Rated current: 1A combined (each supply)

COM6

PUSB 12V 2x powered USB, rated 2.5A

PUSB 24V 1x powered USB, rated 2.5A

Power Output DC 24V Out 24V DC (connect to DN AiO system)

USB Upstream USB Type B (connect to eSATA port of

iPOS plus Advanced)

2nd HDD Power For optional second hard disk

01750372571 A

3-5

4 Installation

WARNING

Danger of short circuit

Improper mounting can result in a short circuit.

lAvoid wall mounting.

4.1

4.1 Cabling

Connect the cable

• Plug in and fasten all data communication cables.

• Connect the power supply unit to the system via a DC cable.

• Connect the power cable of the power supply unit to the overvoltage protection sockets of the hous-

ing system.

Disconnect the cable connection

WARNING!Never disconnect a cable by pulling on the cable, but always directly on the plug.

Proceed as follows when disconnecting cables:

1. Turn off all power and devices switches.

2. Remove the cable cover.

3. Unplug all power plugs from the electrical sockets.

4. Unplug all data communication cables from the data network outlets.

5. Unplug all cables from the devices.

Figure4-1: 4-pin power supply connector

üWith 4-pin power plugs, the plug remains in-

serted until released.

6. Use your thumb to pull the plastic cover off

the socket.

CThe latching mechanism is released. The

metal of the plug is visible.

01750372571 A

4-1

5 Certifications of the Manufacturer

The device complies with the requirements of the EU directives 2014/30/EU with

regard to “Electromagnetic compatibility” and, if applicable, 2014/35/EU “Low

Voltage Directive” and 2011/65/EU "Restriction of Hazardous Substances".

Therefore, you will find the CE mark on the device or packaging.

The device is approved for the USA and Canada.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Responsible Party in the U. S.: Diebold Nixdorf

Address: 5995 Mayfair Road

N. Canton, OH 44720 / USA

Contact: [email protected]

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-

struction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area may cause harmful interference in which case the user will be required to correct the

interference at his expense. Modifications not authorized by the manufacturer may void user’s authority

to operate this device.

This class A digital apparatus complies with Canadian ICES-003.

This device must accept any interference received, including interference that may cause undesired op-

eration.

01750372571 A

5-1

6 Disposal

Returning, remarketing, recycling and disposal

Details regarding the return and recycling of systems and consumables can be obtained from your local

branch office.

Please observe the respective national regulations with regard to the disposal of elec-

trical equipment.

Electrical equipment should not be disposed of as normal municipal waste within the

EU (crossed-out wheeled bin symbol).

For information regarding the possible repurchase of used systems, please contact:

[email protected]

01750372571 A

6-1

DIEBOLD NIXDORF, Incorporated

50 Executive Pkwy | PO Box 2520 | Hudson, OH 44236 | USA

Diebold Nixdorf iPos+ I/O Hub Operating instructions

Diebold Nixdorf iPos+ I/O Hub Operating instructions

Diebold Nixdorf iPos+ I/O Hub Operating instructions

Related papers

Other documents