ASA Electronics JHD62B Operating instructions

Hello! I've reviewed the Work Instruction for the Radio Wiring Harness JHD62B. This document provides step-by-step guidance on the assembly process, including pulling parts, placing them correctly, and labeling, ending with the need for an inspection. I'm ready to assist with any questions you may have about this document or the assembly process.
What is the first step in the work instruction?

Where should the harness be placed?

What kind of label should be placed on the outside of the box?

Date: 9/18/2023

Written By

Doc. Revision: A R. Priddy

Revision Date: Approved By

ASA Model #: JHD62B Joe Caban

3. Place 2x4 Part number/bar code label on the outside of the box.

4. Get first article inspection.

Work Instruction: JHD62B

1. Pull parts per JDE work order.

2. Place the harness in the original box.

9/18/2023 1