2. ASA Electronics
  3. VSXM70PRXR24B

ASA Electronics VSXM70PRXR24B Operating instructions

  • I've reviewed the work instruction for the LINDE KIT VSXM70PRXR24B. This document provides step-by-step guidance on how to assemble the kit by pulling parts, placing them in the box, labeling it, and preparing it for inspection. I'm ready to answer any questions you may have about the assembly process.
  • What is the first step in this work instruction?
    Where should all the parts be placed?
    What label should be placed on the outside of the box?
    What is the final step in this work instruction?
Date: 9/20/2023
Written By
Doc. Revision: A R. Priddy
Revision Date: Approved By
ASA Model #: VSXM70PRXR24B Joe Caban
3. Place 2x4 Part number/bar code label on the outside of the box.
4. Get first article inspection.
Work Instruction:VSXM70PRXR24B
1. Pull parts per JDE work order.
2. Place all parts in the box.
9/20/2023 1
/