Diebold Nixdorf TH250 Reference guide

Brand: Diebold Nixdorf

Model: TH250

Type: Reference guide

Diebold Nixdorf TH250 is a receipt printer with a 12-month warranty that covers damages due to normal use. It is designed to be used in commercial environments and complies with FCC regulations for radio frequency interference. The printer can print on a variety of paper types and can be configured for different printing options, including energy-saving modes. It also has a diagnostic test print function to help identify any issues with the printer.

TH250

Quick Reference

Warranty Information

Diebold Nixdorf guarantees a limited warranty

engagement for 12 months beginning with the date of

delivery. This warranty engagement covers all those

damages which occur despite a normal use of the product.

Damages because of

- improper or insufficient maintenance,

- improper use of the product or unauthorized

modifications of the product,

- inadequate location or surroundings will not be covered

by the warranty.

Manufacturers Certification

This device complies

with the

requirements of the directive

2004/108/EC with regard to

“Electromagnetic Compatibility” and

2006/95/EC "Low Voltage Directive" and

RoHS directive 2011/65/EU.

Therefore, you will find the CE mark on

the device or packaging.

Underwriters Laboratories

In addition, the device has received

the UL and cUL approval.

Federal Communications Commission (FCC)

Radio Frequency Interference Statement

Warning

Changes or modifications to this unit not expressly approved by

the party responsible for compliance could void the user’s

authority to operate the equipment.

Note

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

Information to the User

This equipment must be installed and used in strict accordance

with the manufacturer’s instructions. However, there is no

guarantee that interference to radio communications will not

occur in a particular commercial installation. If this equipment

does cause interference, which can be determined by turning the

equipment off and on, the user is encouraged to contact Diebold

Nixdorf immediately. Diebold Nixdorf is not responsible for any

radio or television interference caused by unauthorized

modification of this equipment or the substitution or attachment

of connecting cables and equipment other than those specified by

Diebold Nixdorf. The correction of interferences caused by such

unauthorized modification, substitution or attachment will be the

responsibility of the user.

This class A digital apparatus complies with Canadian ICES-003.

Cet appareil numerique de la classe A est conforme à la norme

NMB-003 du Canada.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference, including interference that may cause undesired

operation.

Unpack the Printer

Unpack the printer, saving all packing materials for future

shipping or storage.

Changing the paper roll

Connecting the cables

Depending on your printer configuration, the connector

panel may vary from the illustration.

Connector Interface panel

optional

e.g. RS-232C

Communication

Connector

USB

Connector

Power Supply

Connector

Cash

Drawer

Connector

Run a diagnostic test print

Open

cover

Push and hold

Paper Feed

Button while

closing cover

Configure the printer if necessary

The TH250 is an ENERGY STAR® qualified

printer. To set or to adjust the energy-savings

timeout value:

Select “Set Firmware Features” from the main

menu. Scroll to “Set Enter ENERGY STAR

Timeout Value?” Select “Yes”. Printer responds

with the following timeout value selections:

- Disable (no timeout) -> 1 click

- 15 minute timeout -> 2 clicks

- 30 minute timeout -> 3 clicks

- 60 minute timeout -> 4 clicks

Enter clicks for selection, then hold button

down at least 1 second to validate.

Power cycle the printer.

To revive a printer that has entered the energy-

savings mode, press the paper feed button.

Current printer tallies are

printed after the

diagnistic information

and will vary per printer

use.

Safety instructions

Do not touch the printer’s cutter and tear bar.

The print head is a thermal element and it is at

high temperature during printing or just after

operation. Therefore, do not touch it and its

peripherals for safety reasons.

The thermal head is an ESD-sensitive device. To

prevent damage, do not touch either its

printing part or connecting parts.

Caution:

 Install the printer on a flat and stable place.

 Reserve adequate space around the printer so that

convenient operation and main-tenance can be

performed.

 Keep the printer away from water source.

 Do not use or store the printer in a place exposed to

heat or fire, moisture, serious pollution and direct

sunlight.

 Do not place the printer on a place exposed to

vibration or impact.

 No dew condensation is allowed to the printer. In case

of such condensation, do not turn on the power until

condensation completely disappeared.

 Only use power supply units and cables released by

Diebold Nixdorf.

 Connect the printer to “UL Listed Computers” only.

 Only connect cables to the 24V connector which are

marked with DP-1 or DP-2.

 The printer should only be disassembled or repaired

by a technician who is certified by the manufacturer.

Further Information

Please find detailed information about the printer in the

Operator’s Guide. That document as PDF file and needed

drivers can be downloaded from this web site:

http://www.Dieboldnixdorf.com

The reproduction, transmission or use of this document or its

contents is not permitted without express authority.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration

of a utility model or design, are reserved.

Delivery subject to availability; technical modifications

possible.

Order No. 01750275431 D

Diebold Nixdorf TH250 Reference guide

Diebold Nixdorf TH250 Reference guide

Diebold Nixdorf TH250 Reference guide

Related papers

Other documents