SDC 33a User manual

SDC
Brand
SDC
Model
33a
Type
User manual
P:\INST INSTRUCTIONS\ELR KITS\INST-LRVD2L REV C 08-22 Page 1
Any suggestions or comments to this instruction or
product are welcome. Please contact us through
our website or email engineer@sdcsecurity.com
LRVD2L
VON DUPRIN LATCH STATUS SWITCH KIT
MODELS: 33A/35A RIM ONLY
Attach cable tie to the opposite side of the device with the #10 self-tapping screw provided. Carefully route cable over
device head making sure NOT to impede the movement of the latch assembly. Secure cable in the cable tie and
carefully route the cable down the inside wall of the extrusion.
Attach Latch Switch
assembly to 33 series
device head with the two
#10 x 3/4” screws
provided.
LATCH SWITCH
ASSEMBLY
#10 x 3/4” screws
Tab
#10 self-tapping screw
Screw type cable tie
SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM
[t] 800.413.8783 ■ 805.494.0622 ■ E-mail: [email protected] ■ 801 Avenida Acaso, Camarillo, CA 93012 ■ PO Box 3670, Camarillo, CA 93011
INSTALLATION INSTRUCTIONS
SWITCH SPECIFICATION
RED
GRN
WHT
N/C
N/O
COM
3AMP @ 125VAC
RESISTIVE
-
-
-
  • Page 1 1

SDC 33a User manual

SDC
Brand
SDC
Model
33a
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents