2. Herman Miller
  3. Eames Molded Plywood Coffee Table

Herman Miller Eames Molded Plywood Coffee Table, Eames CTM Assembly Instructions

  • Hello! I am an AI chatbot trained to assist you with the Herman Miller Eames Molded Plywood Coffee Table Assembly Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
2.1
Position base to the top in a way the screw holes on the base are aligned to the screw holes
on the top.
Step 2
1.1
Position Top upside down.
Step 1
Power Driver
Parts Included
Tools Required
(3) Screws (Qty: 8)
(2) Base (Qty: 4) Metal Leg
(2) Base (Qty: 4) Wood Leg
How to assemble
your table.
HermanMiller
The Collection
Eames®
Molded Plywood Coffee Table (CTM Shown)
CTM - Metal Legs
CTW - Wood Legs
For more information about our products and services or to see a list of dealers, please visit us at
hermanmiller.com or call (800) 851 1196.
© 2013 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 1bbf9x - A.
® Y, Eames are among the registered trademarks of Herman Miller, Inc.
(1) Top
(OR)
HermanMiller Eames® Table Assembly Instructions1
HermanMiller Eames® Table Assembly Instructions2
3.1
Push legs towards center before tightening. See step 3-A.
5.1
Repeat steps 2 & 3 to assemble the remaining 3 legs.
Metal Leg Metal Leg
Wood Leg Wood Leg
6.1
Rotate the table back to its original position.
4.1
Using power driver tighten the screws. See step 4-A.
Step 3
Step 5 Step 6
Step 4
Step 3-A Step 4-A
/