Herman Miller Motia Sit-to-Stand Tables Product Instructions

Power Driver T Bit T Bit

Tools Required

HermanMiller

MotiaTM Sit-to-Stand Table Electric (Single Stage)

Leg Disassembly Instructions

How to disassemble your table leg.

Step 

. Remove the screws using power driver.

. Remove the actuator palte from the leg. . Turn around the leg and take o the bottom screws using Phillips #.

Step  Step 

Disassembly Instructions1HermanMiller for Motia TM 1BGYVJ rev A

Step 

. Turn around the leg and remove the slim drive from the leg.

Disassembly Instructions2HermanMiller for Motia TM 1BGYVJ rev A

Disassembly Instructions3HermanMiller for Motia TM 1BGYVJ rev A

Power Driver

Tools Required

How to disassemble your table leg.

Step 

. Remove the screws using power driver.

. Remove the actuator palte from the leg. . Turn around the leg and take o the bottom screws using Phillips #.

Step  Step 

T Bit T Bit

HermanMiller

MotiaTM Sit-to-Stand Table Extended Electric

(Dual Stage) Leg Disassembly Instructions

Disassembly Instructions4HermanMiller for Motia TM 1BGYVJ rev A

For more information about our products and services please visit us at

hermanmiller.com or call ()  .

® Y, HermanMiller for MotiaTM Table is among the registered trademarks of Herman Miller, Inc.

Step  Step 

. Remove the lower leg. . Remove the slim drive from the leg.