2. Herman Miller
  3. Zeph Stool

Herman Miller Zeph Stool Product Instructions

  • Hello! I've reviewed the instruction manual for the HermanMiller Zeph stool cylinder replacement. This document provides a detailed, step-by-step guide on how to replace the cylinder, including how to detach and reattach components like the base, tilt assembly, footrest, and cylinder cover. I'm ready to answer any specific questions you might have about the process.
  • What tools are required for the cylinder replacement?
    What is the first step in the cylinder replacement?
    What should I do after detaching the base?
HermanMiller ZephTM Installation Assembly Instructions1BV3ZX rev B1
Parts Included
HermanMiller
ZephTM Stool Cylinder Replacement
Instruction Manual
How to Replace ZephTM Stool Cylinder
Step 1:
Strike using a mallet on the nylon cap placed on the cylinder to release the
base from the cylinder.
Tools Required
Mallet
Cylinder
Nylon cap
Step 2:
Detach the base assembly from the cylinder assembly.
HermanMiller ZephTM Installation Assembly Instructions1BV3ZX rev B2
Step 3:
Using a mallet hit both side of the chair and pull o the cylinder assembly
from the tilt assembly.
Step 4:
Detach the footrest assembly from the cylinder assembly.
Step 5:
Detach the cylinder cover.
Step 6:
Replace the new cylinder and attach the cylinder cover.
HermanMiller ZephTM Installation Assembly Instructions1BV3ZX rev B3
Step 8:
Attach the cylinder assembly to the tilt assembly.
Step 7:
Attach the footrest to the cylinder assembly.
Step 9:
Place the chair assembly onto the base. Sit in chair to engage tapers
(cylinder/tilt and cylinder/base).
/