BMW Apollo 84620029299 Installation Instructions Manual

BMW
Brand
BMW
Model
Apollo 84620029299
Type
Installation Instructions Manual

This manual is also suitable for

BMW Apollo 84620029299 is a car phone upgrade kit for the BMW X5 (E53) model. It allows for the integration of a car phone into the vehicle's existing infotainment system, providing hands-free calling and other advanced features. The kit includes a transceiver module, eject box, interface, hands-free microphone, and necessary cabling. With this upgrade, you can make and receive phone calls, access phone contacts and call history, and enjoy improved audio quality through the vehicle's sound system.

BMW Apollo 84620029299 is a car phone upgrade kit for the BMW X5 (E53) model. It allows for the integration of a car phone into the vehicle's existing infotainment system, providing hands-free calling and other advanced features. The kit includes a transceiver module, eject box, interface, hands-free microphone, and necessary cabling. With this upgrade, you can make and receive phone calls, access phone contacts and call history, and enjoy improved audio quality through the vehicle's sound system.

Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
BMW Apollo / Classic car phone upgrade kit
BMW X5 (E
53)
These installation instructions are only valid for cars with SA 640
The installation time is approx. 2.5 hours, but this may vary depending on the condition of the
car and the equipment in it.
Retrofit / Installation kit No. 84 63 0 029 299
84 63 0 140 413
Parts and Accessories
Installation Instructions
EN/2
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
Contents
Section Page
Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. To install and connect the transceiver module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. To install and connect the eject box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. To install the hands-free microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7. Concluding work and coding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
EN/3
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
Important information
This upgrade kit is for use within the BMW dealership organisation only.
Target group
The target group for these installation instructions is specialist personnel trained on BMW cars
with specialist knowledge of vehicle electrical systems.
Work:
All servicing, repair and installation work on BMW cars is completed at your own risk.
All work is to be carried out using current BMW
-Repair manuals
-Circuit diagrams
in a rational order using the prescribed tools (special tools) and observing current health and
safety regulations.
Safety instructions
The current accident prevention regulations must be followed.
Refer to the safety instructions for handling components of the airbag system. Further
information is available in the TIS in RA No. 32 34 ... If you fail to follow the safety instructions
the airbag system may deploy incorrectly and cause injuries.
List of pictograms and special equipment
Denotes information that must be read before the installation work for safety reasons and
to avoid damaging the car.
Denotes instructions that draw your attention to special features.
!
EN/4
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
1. Preparations
0
TIS instruction No.
Conduct a brief test
Disconnect the negative pole of the battery 12 00 ...
The following components must be removed first of all:
Boot lid trim on the left 51 47 172
Driver seat 52 14 000
Fresh air grille in the rear 64 22 190
Armrest
Rear left side carpet on the centre console 51 16 204
Hands-free microphone trim 84 11 550
EN/5
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
2. Installation and cabling diagram
0
Legend
0
1Hands-free microphone
2Eject box and interface
3 Adapter eject box
4 Transceiver module
5 Transceiver module adapter
053 0029 Z
21
4
5
3
EN/6
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
3. Connection overview
0
0
Item Description Signal
Cable colour
/ Cross-
section
Connection location in the car
Abbreviation /
Slot
AAdapter eject box
--- ---
Between the standard wiring
harness and interface
---
A1 Black 18-pin plug
--- ---
To interface X4545
A2 Black 18-pin plug
--- ---
To plug X4545 on the standard
wiring harness
X4545
BTransceiver module adapter
--- ---
Between the standard wiring
harness and transceiver module
---
B1 Black 54-pin plug
--- ---
To plug X13599 on the standard
wiring harness
X10616
B2 Black 25-pin plug
--- ---
To transceiver module X13324
B3 Black 3-pin plug
--- ---
To aerial amplifier X1765
CAerial adapter
--- ---
Between the standard wiring
harness and transceiver module
---
C1 FAKRA plug contact
--- ---
To standard aerial cable
---
C2 Mini UHF plug contact
--- ---
To transceiver module
---
A2
A
A1
B1
C1 C2
B2
B3
B
C
053 0051 Z
EN/7
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
4. To install and connect the transceiver module
0
0
0
0
0
Insert the module holder (1) on the left-hand side
of the boot (2) and secure it with hexagonal nuts
M6 (3) and a hexagonal screw M6 (4).
0
Place speed nuts (1) on the module holder (2).
0
Connect branch
B1
to the black, 54-pin plug
X13599
on the standard wiring harness (1).
0
Connect branch
B2
to the transceiver module (1).
Connect the aerial adapter
C
between the
transceiver module (1) and standard aerial
cable (2).
3
3
4
1
2
053 0030 Z
1
2
053 0031 Z
B1
1
B
X13599
053 0032 Z
B2
C
2
1
053 0050 Z
EN/8
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
4. To install and connect the transceiver module
0
0
Insert the transceiver module (1) into the module
holder (2) and secure it with the bar (3) and a
hexagonal screw M5 (4).
4
3
1
2
053 0054 Z
EN/9
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
5. To install and connect the eject box
0
0
0
0
0
Undo the Allen bolts (1) from the armrest (2) and
remove the cover (3).
0
Take all the springs (1) out of the armrest (2).
Remove both bolts (3) with a punch and pull the
guide arms (4) upwards.
0
Unclip the covers (1) from the guide arms (2).
0
Pull the slide plate (1) on the armrest (2) backwards
as far as it will go.
Release the retaining pins on the oddments box (3)
with screwdrivers (4) and unclip the oddments
box (3).
3
2
1
053 0035 Z
2
1
3
4
053 0036 Z
1
2
053 0037 Z
1
2
3
4
053 0048 Z
EN/10
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
5. To install and connect the eject box
0
0
0
0
0
Clip the eject box (1) into the armrest (2).
Attach the telephone cable (3) under the guide (4)
as shown.
0
Screw the cable guide (1) into the armrest (2) and
insert the telephone cable (3) as shown.
0
Insert the interface (1) into the armrest (2).
Connect the 12-pin eject box plug (3) into the
interface (1).
Insert the cable (4) from the interface (1) into the
guide arm (5) and fit the cover (6) again.
0
Insert the eject box cable (1) into the guide arm (2)
and fit the cover (3) again.
Assemble the armrest (4) again following the
instructions for its dismantling in reverse.
3
1
2
4
053 0038 Z
2
1
3
053 0039 Z
3
4
6
5
1
2
053 0040 Z
2
3
1
4
053 0041 Z
EN/11
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
5. To install and connect the eject box
0
0
0
Install the armrest back on to the centre console.
Lay the interface cable (1) and the 6-pin black
plug (2) from the eject box as shown.
Connect the plug (2) from the eject box and the
plug (3) from the interface.
0
Release the tied back, black 18-pin plug
X4545
from the standard wiring harness.
The adapter cable
A
must be fitted.
Connect the adapter cable
A
between plug
X4545
and the 18-pin plug (1) from the interface.
2
3
1
053 0052 Z
A
1
X4545
053 0053 Z
!
EN/12
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
6. To install the hands-free microphone
0
0
0
0
Thread the tied back plug
X4221
through
the microphone opening (1) in the headlining
console (2).
0
Clip the enclosed hands-free microphone (1) into
the microphone trim (2) you removed earlier.
Connect plug
X4221
to the hands-free
microphone (1).
0
The arrow on the hands-free microphone (1)
must point to the front of the car.
Clip the microphone trim (1) with the hands-free
microphone into the headlining console (2).
X4221
1
2
053 0044 Z
2
1
X4221
053 0045 Z
1
2
053 0046 Z
EN/13
Retrofit / Installation kit No. 84 63 0 029 299 / 84 63 0 140 413
Installation Instructions No. 01 29 0 140 414 Issue date: 11.2001
7. C oncluding work and coding
This upgrade system does not require coding.
-Conduct a brief test with DIS/MoDiC.
-Conduct a function test
-Assemble the car again following the instructions to dismantle it in reverse order.
If necessary, the circuit diagram for the telephone preparation (SA 640) and for the adapter
cables can be taken from the installation instructions entitled “Telephone upgrade circuit
diagrams, part No. 01 29 0 140 378” on the installation instructions CD.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

BMW Apollo 84620029299 Installation Instructions Manual

BMW
Brand
BMW
Model
Apollo 84620029299
Type
Installation Instructions Manual
This manual is also suitable for

BMW Apollo 84620029299 is a car phone upgrade kit for the BMW X5 (E53) model. It allows for the integration of a car phone into the vehicle's existing infotainment system, providing hands-free calling and other advanced features. The kit includes a transceiver module, eject box, interface, hands-free microphone, and necessary cabling. With this upgrade, you can make and receive phone calls, access phone contacts and call history, and enjoy improved audio quality through the vehicle's sound system.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents