BMW 84 64 0 302 016 Installation Instructions Manual

BMW
Brand
BMW
Model
84 64 0 302 016
Type
Installation Instructions Manual
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
Universal “Komfort” hands-free kit upgrade kit
BMW 3 Series (E
46) from 03/02
The installation time is approx. 2 hours, but this may vary depending on the condition of the car and the
equipment in it.
Retrofit kit No. 84 64 0 302 016
Parts and Accessories
Installation Instructions
EN/2
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
Contents
Section Page
Important information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Preparations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Installation and cabling diagram E46/2/3/4/5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Installation and cabling diagram E46/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. Connection diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. To install and connect the monoblock and E box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7. To install and connect the SES control module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8. To install the hands-free microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9. To install the plug bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
10. Concluding work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
11. Plug bridge circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12. Circuit diagram for the SES retrofit wiring harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
EN/3
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
Important information
Subject to technical modifications.
Do not archive the hard copy of these installation instructions since daily updates are made by ASAP.
Installation information
Ensure that the cables/lines are not kinked or damaged as you install them in the car.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
Additional cables/lines that you install must be secured with cable ties.
All the figures show LHD cars, proceed in exactly the same way on RHD cars.
Target group
These installation instructions are primarily designed for use within the BMW dealership organisation and by
authorised BMW service companies. In any event the target group for these installation instructions is
specialist personnel trained on BMW cars with the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and
work instructions in a rational order using the prescribed tools (special tools) and observing current health and
safety regulations.
Ordering instructions
The snap-in adapter is not supplied with the retrofit kit and must be ordered separately for the various
telephones.
The voice input control module R is not supplied with the retrofit kit and must be ordered separately for the
appropriate language.
Pictograms
Denotes instructions that draw your attention to special features.
Denotes instructions of warnings that you must observe.
Denotes the end of the instruction or caution text.
List of special equipment
The following special equipment must be taken into consideration when installing the Universal “Komfort”
hands-free kit.
SA 403 Glass roof
Special tools required
None
!
EN/4
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
1. Preparations
0
TIS instruction No.
Conduct a brief test
---
Disconnect the negative pole of the battery 12 00 ...
The following components must be removed first of all:
Glass roof switch trim (cars with SA 403 only) 51 44 ...
Glove box with casing, right 51 16 366
Oddments box support 51 16 ...
Boot trim on the left 51 47 151
Rear seat bench (E46/C only) 51 24 005
Rear seat backrest (E46/C only) 51 24 010
EN/5
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
2. Parts list
0
Legend
ACable tie (5x)
B Plug bridge
CMonoblock
DE box
ESES retrofit cable
F Protective strip (3x)
G Protective strip
HFrame console
IE box holder
J Hands-free microphone
K Voice input control module holder
L Hexagonal nut BM6 (2x)
M Hexagonal screw with washer M6 x 40-Z1 (2x)
N Fillister head self-tapping screw St3.5 x 9.5 (2x)
OCap nut M5
P Sleeve (2x)
R Voice input control module (not supplied)
DCA
E
LK M N O P R
F G H I J
B
EN/6
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
3. Installation and cabling diagram E46/2/3/4/5
0
Legend
B Plug bridge
C Monoblock
DE box
E SES retrofit cable
J Hands-free microphone
R Voice input control module (not supplied)
J
E
D C
R
B
EN/7
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
4. Installation and cabling diagram E46/C
0
Legend
B Plug bridge
C Monoblock
DE box
E SES retrofit cable
J Hands-free microphone
R Voice input control module (not supplied)
J
E
D C
R
B
EN/8
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
5. Connection diagram
0
0
Item Description Signal
Cable colour
/ Cross-
section
Connection location in the car Abbreviation / Slot
B Black 54-pin plug bridge --- --- To standard wiring harness X13599
C Monoblock --- --- --- ---
C1 Black 18-pin plug --- --- To branch D3 of the E box ---
C2 Fakra socket contact --- --- To standard aerial cable X13322
C3 Black 12-pin plug --- --- To branch D4 of the E box ---
C4 Western plug
--- ---
Only required with the optional second
receiver module
---
D E box --- --- --- ---
D1 18-pin plug --- --- To branch E1 of the SES retrofit cable ---
D2 SW 18-pin plug casing --- --- To standard wiring harness X4545
D3 SW 18-pin socket casing --- --- To branch C1 of the monoblock ---
D4 12-pin plug --- --- To branch C3 of the monoblock ---
D5 10-pin WS plug casing
--- ---
Only required for a retrofit PDA navigation
system
---
E SES retrofit cable --- --- --- ---
E1 SW 18-pin plug casing --- --- To branch D1 of the E box ---
E2 BL 26-pin socket casing --- --- To SES control module ---
D1
D2
E1
E2
D3 D5
D4
C1 C2 C3 C4
B
D
C
E
EN/9
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
6. To install and connect the monoblock and E box
0
0
0
0
0
Clip the monoblock C into the frame console H.
0
Clip the frame console with the monoblock C into the
oddments box (1).
0
Connect branch C3 to connector D4 on the E box D .
0
Affix the sealing strip F to the inside of the E box holder I.
Insert the E box D into the E-box holder I and clip them
together in the oddments box (1).
C
H
C
1
C3
D D4
D
F 1
I
EN/10
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
6. To install and connect the monoblock and E box
0
0
0
Connect branch E1 to connector D1 on the E box D .
Connect branches C1 and D3.
Wrap the plug connector in the protective strip G.
0
Connect branch D2 to plug X4545.
Connect branch C2 to the vehicle aerial cable (1).
Wrap the plug connectors in the protective strip G.
E1
D3
C1 D
D1
G
G
D2
C2
1
X4545
EN/11
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
7. To install and connect the SES control module
0
0
0
0
0
Cars with additional relay holder only
Undo the relay holder (1).
Clip the existing relay (2) sideways into the relay holder
(3).
0
All cars
Mark the holes (1) on the holder K.
Dimension a:35 mm
Dimension b:133 mm
Dimension c:68 mm
Dimension d:9 mm
Drill through the drilling positions with a 7 mm twist drill.
0
Insert the holder K in the footwell and mark the holes (1)
on the cross brace (2).
Drill through the drilling positions with a 3 mm twist drill.
0
Wrap the standard wiring harness in the protective strip
G.
3
1
2
c
a
b
d
K
1
1
1
K
2
G
1
EN/12
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
7. To install and connect the SES control module
0
0
0
0
Use the sleeves P, hexagonal screws M and hexagonal
nuts L to secure the voice input control module R to the
holder K.
0
Connect branch E2 to the voice input control module R.
0
Insert the holder K into the footwell and secure it with a
cap nut O and fillister head screws N.
L
P
M
K
R
E2
R
O
K
N
EN/13
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
8. To install the hands-free microphone
0
0
0
0
E46/2/3/4/5 with SA 403 only
Release the tied back plug X4221 from the standard
wiring harness and connect it to the hands-free
microphone J.
The arrow on the hands-free microphone J must
point to the front of the car.
Clip the hands-free microphone J into the trim (1).
0
E46/2/3/4/5 without SA 403 only
Release the tied back plug X4221 from the standard
wiring harness and connect it to the hands-free
microphone J.
The arrow on the hands-free microphone J must
point to the front of the car.
Clip the hands-free microphone J into the trim (1).
0
E46/C only
Release the tied back plug X4221 from the standard
wiring harness and connect it to the hands-free
microphone J.
The arrow on the hands-free microphone J must
point to the front of the car.
Clip the hands-free microphone J into the ceiling light (1).
1
J
X4221
1
J
X4221
1
J
X4221
EN/14
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
9. To install the plug bridge
0
0
0
E46/2/3/4/5 only
Connect the plug bridge B to plug X13599 on the left-
hand side of the boot.
Wrap the plug connector in the protective strip G.
0
E46/C only
Connect the plug bridge B to plug X13599 behind the
rear seat backrest.
Wrap the plug connector in the protective strip G.
X13599
B
G
G
X13599
B
EN/15
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
10. Concluding work
This upgrade system does not require coding.
- Conduct a brief test with DIS/MoDiC III/GT-1.
- Conduct a function test
- Re-assemble the car
EN/16
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
11. Plug bridge circuit diagram
0
Legend
Cable colours
B* 54-pin plug bridge
X4038 54-pin plug
BR Brown
GE Yellow
GN Green
GR Grey
RT Red
SW Black
VI Violet
WS White
B*
X4038
046 1344 Z
EN/17
Retrofit kit No. 84 64 0 302 016
Installation Instructions No. 01 29 0 302 056 Issue date: 02.2003
12. Circuit diagram for the SES retrofit wiring harness
0
Legend
Cable colours
W600 Screen open
W601 Screen open
X4545 18-pin black plug
X10390 26-pin plug, blue
BR Brown
GE Yellow
GN Green
GR Grey
RT Red
SW Black
VI Violet
WS White
X4545
W601
X10390
W600
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

BMW 84 64 0 302 016 Installation Instructions Manual

BMW
Brand
BMW
Model
84 64 0 302 016
Type
Installation Instructions Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents