ABB 8215 U-500 Operating Instructions Manual

Brand: ABB

Model: 8215 U-500

Type: Operating Instructions Manual

1473-1-7955 │ Rev. 01 │ 18.12.2012

Operating Instructions

Busch-AudioWorld

Pos: 2 /#Neustruktur#/ Online-Dokumentati on (+KNX)/Titelbl ätter/AudioVideo/ Titelblatt - 8215 @ 21\mod_1 330416575872_15. docx @ 199055 @ @ 1

8215 U-500

Flush-mounted DigitalRadio

=== Ende der Liste für Textmarke Cover ===

Operating Instructions

Busch-AudioWorld

Operating Instructions | 1473-1-7955 — 2 —

Pos: 4 /#Neustruktur#/ Online-Dokumentati on (+KNX)/Inhalts verzeichnis (- -> Für alle Dokumente <-- )/Inhaltsverzeichni s @ 19\mod_1320649044386_ 15.docx @ 109653 @ @ 1

Safety ....................................................................................................................................................................... 3

2 Intended use ............................................................................................................................................................ 3

3 Environment ............................................................................................................................................................. 3

4 Operation ................................................................................................................................................................. 4

4.1 Key assignment ...................................................................................................................................... 4

4.2 Symbols .................................................................................................................................................. 5

4.3 Adjusting the device ................................................................................................................................ 6

4.3.1 Language ................................................................................................................................................ 7

4.3.2 Time ........................................................................................................................................................ 8

4.3.3 Alarm call function ................................................................................................................................... 9

4.3.4 Mode ..................................................................................................................................................... 10

4.3.5 Illumination ............................................................................................................................................ 11

4.3.6 Search mode ......................................................................................................................................... 12

4.3.6.1 Automatic search mode for radio station ............................................................................................... 12

4.3.6.2 Manual search mode............................................................................................................................. 13

4.3.7 Quit ....................................................................................................................................................... 14

4.4 Settings in the modification menu ......................................................................................................... 15

4.4.1 Alarm clock On/Off ................................................................................................................................ 16

4.4.2 Alarm time ............................................................................................................................................. 17

4.4.3 Time ...................................................................................................................................................... 18

4.4.4 Transmitter ............................................................................................................................................ 19

4.4.5 Version .................................................................................................................................................. 20

4.4.6 Quit ....................................................................................................................................................... 20

4.4.7 Sleep function ....................................................................................................................................... 21

4.4.8 Rest (resetting the device) .................................................................................................................... 22

5 Technical data........................................................................................................................................................ 23

6 Setup and function ................................................................................................................................................. 24

6.1 Possible combinations .......................................................................................................................... 24

7 Installation and electrical connection ..................................................................................................................... 25

7.1 Requirements for the electrician ........................................................................................................... 25

7.2 Mounting ............................................................................................................................................... 26

7.3 Electrical connection ............................................................................................................................. 28

8 Brief overview of operation (to print out) ................................................................................................................ 29

=== Ende der Liste für Te xtmarke TOC ===

Operating Instructions

Busch-AudioWorld

Safety

Operating Instructions | 1473-1-7955 — 3 —

Pos: 6 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/S - T/Sicherheit @ 18\mod_130 2612791790_15.doc x @ 103357 @ 1 @ 1

1 Safety

Pos: 7 /#Neustruktur#/Online-Dokumentation (+KNX)/Sicherheitshinweise und Hinweise (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - 230 V @ 18\mod_1302606816750_1 5.docx @ 103308 @ @ 1

Warnin

Electric voltage!

Risk of death and fire due to electrical voltage of 230 V.

– Work on the 230V supply system may only be performed by authorised electricians!

– Disconnect the mains power supply prior to installation and/or disassembly!

Pos: 8 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Bestimmungsgemäßer Gebr auch @ 18\mod_1302763321316 _15.docx @ 103483 @ 1 @ 1

2 Intended use

Pos: 9 /#Neustruktur#/ Online-Dokumentati on (+KNX)/Besti mmungsgemäßer Gebrauch/ AudioVideo/Besti mmungsgemaesser Gebr auch - Audio allgemein @ 23\ mod_1335942854884_15. docx @ 208893 @ @ 1

The device is part of the Busch-AudioWorld

system and is to be used exclusively with the components that are

supplied and licensed as described in chapter "Function". The device must only be installed in dry indoor rooms.

Pos: 10.1 /#Neustrukt ur#/Modul-Strukt ur/Online-Dokumen tation/Überschr iften (--> Für alle Dokument e <--)/1. Ebene/U - Z/Um welt @ 18\mod_1302614158 967_15.docx @ 103383 @ 1 @ 1

3 Environment

Pos: 10.2 /#Neustruktur#/Online-Dokumentation (+KNX)/Sicherheitshinweise und Hinweise (--> Für alle Dokumente <--)/Hinweise/Hinweis - Umwelt - Hinweis Elektrogeräte @ 18\ mod_1302763973434_15. docx @ 103500 @ @ 1

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with domestic waste.

– The device contains valuable raw materials which can be recycled. Therefore, dispose of the

device at the appropriate collecting depot.

Pos: 10.3 /#Neustruktur#/Online-Dokumentation (+KNX)/Sicherheitshinweise und Hinweise (--> Für alle Dokumente <--)/Hinweise/Hinweis - Umwelt - Entsorgung Elektrogerät e @ 20\mod_1325760695972_ 15.docx @ 136583 @ @ 1

All packaging materials and devices bear the markings and test seals for proper disposal. Always dispose of the

packaging material and electric devices and their components via the authorized collecting depots and disposal

companies.

The products meet the legal requirements, in particular the laws governing electronic and electrical devices and

the REACH ordinance.

(EU Directive 2002/96/EC WEEE and 2002/95/EC RoHS)

(EU REACH ordinance and law for the implementation of the ordinance (EC) No.1907/2006)

Pos: 11 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 4 —

Pos: 12 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Bedienung @ 11\mod_1279185 541649_15.docx @ 83043 @ 1 @ 1

4 Operation

Pos: 13 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/S - T/Tastenbelegung @ 23\mod_13 36978335991_15.doc x @ 209274 @ 2 @ 1

4.1 Key assignment

Pos: 14 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/ Tastenbelegung - 8215 @ 21\mod_13 30682941284_15.doc x @ 199887 @ @ 1

Fig. 1: Key assignment

For setup

No. Function

1 ON/OFF

2 Previous menu

3 Next menu

4 Programming button / OK

For operation

No. Function

1 ON/OFF

2 Low volume

3 High volume

4 Change of station

Pos: 15 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 5 —

Pos: 16 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/S - T/Symbole @ 17\mod_13014773 87990_15.docx @ 101944 @ 2 @ 1

4.2 Symbols

Pos: 17 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Di splayerklärung - 8215 @ 21\ mod_1330682597571_ 15.docx @ 199873 @ @ 1

Fig. 2: Symbols

No. Function

1 Stereo reception

2 The alarm is activated

3 Turn-off time (sleep function) is set.

4 Station channel / menu selection level

5 RDS name / frequency / menu item

6 MHz (displayed in the case of stations without RDS)

7 TUNE (display during tuning)

8 MENU (displayed when setting the operating menu and during the setup)

Pos: 18 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

1 2 3 4

RADIOSen

MENU TUNE Mhz

7 6

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 6 —

Pos: 19 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/G - L/Geräteeinstellungen @ 18\mod_1302768847 744_15.docx @ 103548 @ 2 @ 1

4.3 Adjusting the device

Pos: 20 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Ei nstellungen Setup/Ei nstellungen Setup - 8215 @ 21\mod_1330683395804_1 5.docx @ 199903 @ @ 1

The setup is carried out automatically during initial commissioning or when resetting the settings (RESET).

If certain functions are not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

Carry out the device settings in the following order.

A detailed description of the individual steps is contained in the following sub-sections.

Please switch the device on.

No. Function

1 Selecting languages

2 Entering the time

3 Setting the alarm call function

We recommend that you set the alarm call function always at the same time. To set the alarm call function

after the setup is no longer possible. To activate the alarm call function you need to carry out the setup

again.

4 Selecting mono or stereo mode (type of connection)

5 Setting the illumination of the display

6 Setting the radio station

7 Quit

Pos: 21 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 7 —

Pos: 22 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/S - T/Sprache @ 22\mod_133155815 4927_15.docx @ 202824 @ 3 @ 1

4.3.1 Language

Pos: 23 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Ei nstellungen Setup/Ei nstellungen Sprache - 8215 @ 21\mod_1330683580321 _15.docx @ 199963 @ @ 1

Fig. 3: Language selection

If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

When changing to "Language" the following functions become available:

No. Function

1 Language

- When confirming with the Prog button you switch to menu item "Language".

2 Selecting languages

- 7 different languages are available for selection.

- Press the "plus or minus" button until you have reached the desired language.

- Press the Prog button to store the desired language. You simultaneously switch to the next processing

step.

Pos: 24 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

Sprache

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 8 —

Pos: 25 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/U - Z/Uhrzeit @ 22\mod_133155822 3312_15.docx @ 202839 @ 3 @ 1

4.3.2 Time

Pos: 26 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Ei nstellungen Setup/Ei nstellungen Uhrzei t - 8215 @ 21\mod_13306835742 02_15.docx @ 199948 @ @ 1

Fig. 4: Time

If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

In step 2 "Time" the following functions become available:

The time is only displayed on the deactivated display when the "alarm call function" is set on "active" during step

No. Function

1 Time

- When confirming with the Prog button you switch to menu item "Time".

2 Setting the hours

- Set the hours with the "plus / minus" buttons.

- Confirm the hours entered by pressing PROG button.

3 Setting the minutes

- Set the minutes with the "plus / minus" buttons.

- Confirm the minutes by pressing the PROG button. You simultaneously switch to the next processing

step.

Pos: 27 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

UHRZEIT

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 9 —

Pos: 28 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/U - Z/Weckfunktion @ 22\mod _1331558252943_15.doc x @ 202853 @ 3 @ 1

4.3.3 Alarm call function

Pos: 29 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Ei nstellungen Setup/Ei nstellungen Weckf unktion - 8215 @ 21\mod_133154 7204095_15.docx @ 202573 @ @ 1

Fig. 5: Alarm call function

We recommend that you set the alarm call function always at the same time. To set the alarm call function after

the setup is no longer possible. To activate the alarm call function you need to carry out the setup again.

If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

In step 3 "Alarm call function" the following functions become available:

No. Function

1 Alarm call function

- When confirming with the Prog button you switch to menu item "Alarm call function".

2 Setting the alarm call function to Off/On

- Set the alarm call function to Off/On with the "plus / minus" buttons.

- Confirm your selection with the "PROG" button. When you have selected the alarm call function, you

simultaneously switch to the next processing step.

3 Setting the alarm call function to "On":

Set the hours

- Set the hours with the "plus / minus" buttons.

- Confirm the hours entered with the PROG button.

Setting the minutes

- Set the minutes with the "plus / minus" buttons.

- Confirm the minutes by pressing the PROG button. You simultaneously switch to the next processing

step.

Pos: 30 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

UHR/WECK

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 10 —

Pos: 31 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/M - O/Modus @ 22\mod_133155829 1775_15.docx @ 202867 @ 3 @ 1

4.3.4 Mode

Pos: 32 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Ei nstellungen Setup/Ei nstellungen Modus - 8215 @ 21\mod_133154740794 0_15.docx @ 202588 @ @ 1

Fig. 6: "Mono / Stereo" mode

If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

In step 4 "Mode" the following functions become available:

No. Function

1 Mode

- When confirming with the Prog button you switch to menu item "Mode".

2 Selecting mono / stereo mode

- Set the radio mode on "Mono or stereo" with the "plus / minus" buttons.

(Two loudspeakers must be connected for stereo mode.)

- Confirm your selection with the "PROG" button. You simultaneously switch to the next processing step.

Pos: 33 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

MODUS

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 11 —

Pos: 34 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/A - F/Beleuchtung @ 25\mod_13407 88088793_15.doc x @ 220301 @ 3 @ 1

4.3.5 Illumination

Pos: 35 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Ei nstellungen Setup/Ei nstellungen Beleuc htung - 8215 @ 21\mod_1331547 552026_15.docx @ 20260 3 @ @ 1

Fig. 7: Illumination

If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

In step 5 "Illumination" the following functions become available:

No. Function

1 Lighting

- When confirming with the Prog button you switch to menu item "Illumination".

2 Set the illumination of the display

You can select between the following options:

1. ON (continuous illumination)

2. OFF (no illumination)

3. Automatic (illumination switches off after 20 seconds)

- Set the desired illumination with the "plus / minus" buttons.

- Confirm your selection with the "PROG" button. You simultaneously switch to the next processing step.

Pos: 36 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

BELEUCHT

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 12 —

Pos: 37 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/S - T/Suchlauf @ 22\mod_133 1558523234_15.docx @ 202951 @ 3 @ 1

4.3.6 Search mode

Pos: 38 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Ei nstellungen Setup/Ei nstellungen Suchlauf - 8215 @ 21\mod_1331547701 859_15.docx @ 202618 @ 44 @ 1

Fig. 8: Search mode

If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

4.3.6.1 Automatic search mode for radio station

We recommend the use of the automatic search mode for radio stations.

In step 6 "Search mode" the following functions become available:

No. Function

1 Search mode

- When confirming with the Prog button you switch to menu item "Search mode".

2 Set the radio station

The following options are available:

1. "Automatic" search mode (the 8 radio station with the best reception are automatically searched for and

saved)

- If you decide to use the "automatic" search mode, confirm it by pressing the Prog button.

3 After the search has been completed, the menu is terminated and normal radio operation continues.

PROG

Suchlauf

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 13 —

4.3.6.2 Manual search mode

In step 6 "Search mode" the following functions become available:

No. Function

1 Search mode

- When confirming with the Prog button you switch to menu item "Search mode".

2 Set the radio station

The following options are available:

1. "Manual" search mode (radio station can be searched for and saved manually, a maximum of 8 stations)

- If you decide to use the "Manual" search mode, change from display "Automatic" to the manual search

mode with the "plus / minus" buttons and confirm with the Prog button.

- Search for the suitable radio frequencies with the "plus / minus" buttons.

Tip: If you keep the "plus / minus" button pressed for approximately 5 seconds, the next most powerful

station will be displayed.

- Confirm the manual selection of the station with the Prog button.

- Search for a memory location (location 1-8) with "plus / minus buttons.

- Confirm the memory location with the Prog button.

- After the confirmation with the Prog button the display shows the text "Saved". After this you change

automatically to the enquiry "Additional stations".

3 Additional stations

- Confirm your enquiry with the Prog button.

- Confirm the enquiry "Yes" with the Prog button if you wish to select additional station.

- Search for the suitable radio frequencies with the "plus / minus" buttons.

- Confirm your selection of the station with the Prog button.

- Search for a memory location (location 1-8) with the "plus / minus buttons.

- Confirm the station location with the Prog button.

_ You can keep confirming this enquiry with "Yes" until you have found and set all your desired stations,

or occupied all 8 station locations.

Attention: No message is displayed showing that all station locations are occupied, which means that

station location 8 can be continuously overwritten!

- When all 8 station locations have been occupied, change to the next processing step.

4 Quitting the input

- Answer the enquiry "Additional stations" with "No".

- Press the "plus" button.

- Confirm the enquiry "No" with the Prog button once you have set all the stations. You simultaneously

switch to the next processing step.

Pos: 39 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 14 —

Pos: 40 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/A - F/Beenden @ 22\mod_13315583 88401_15.docx @ 202909 @ 3 @ 1

4.3.7 Quit

Pos: 41 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Ei nstellungen Setup/Ei nstellungen Beenden - 8215 @ 21\mod_1331548809389 _15.docx @ 202646 @ @ 1

Fig. 9:

In step 7 "Quit" the following functions become available:

No. Function

1 Quit

- By confirming the enquiry "Quit" with the Prog button, you complete the setup.

- The setup is completed and the device is ready for operation.

2 Modification menu settings

- For later processing of the settings after the setup, see chapter "Modification menu settings".

Pos: 42 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

BEEnden

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 15 —

Pos: 43 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Einstellungen Änder ungsmenü @ 21\mod_1330956914 729_15.docx @ 201143 @ 2 @ 1

4.4 Settings in the modification menu

Pos: 44 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Eins tellungen Änderungs menü/Einstellungen Änd erungsmenü - 8215 @ 21\ mod_1331549105109_15. docx @ 202663 @ @ 1

To change the settings, press the Prog button long for approximately 5 seconds.

If certain functions are not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

Modification options

No. Function

1 Switching the alarm clock on and off (only possible when the alarm clock has been activated)

2 Setting the alarm time

3 Changing the time

4 Changing the station

5 Quit

Activating the sleep function

RESET (resetting the device)

Pos: 45 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 16 —

Pos: 46 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/U - Z/Wecker Ein/Aus @ 22\ mod_1331558429185_15.doc x @ 202923 @ 3 @ 1

4.4.1 Alarm clock On/Off

Pos: 47 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Eins tellungen Änderungs menü/Einstellungen W ecker EIN/AUS - 8215 @ 22\mod_1 331556579375_15.doc x @ 202795 @ @ 1

Fig. 10:

If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

In step 1 "Alarm clock On / Off" the following functions become available:

No. Function

1 Alarm clock

- When confirming with the Prog button you switch to menu item "Alarm clock On / Off".

2 Alarm clock On or Off

- Set the alarm clock on "On" or "O" with the "plus / minus" buttons.

- Confirm your selection with the Prog button. When you have set the alarm clock on "On", the alarm clock

icon is shown on the display. You simultaneously switch to the next processing step.

Hint

There is no buffer in case of a power failure.

The time is restored again via the RDS time signal once the power has been restored. The alarm

time settings, however, are lost.

Pos: 48 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

wecker Ei

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 17 —

Pos: 49 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/U - Z/Weckzeit @ 22\mod_133 1558460831_15.doc x @ 202937 @ 3 @ 1

4.4.2 Alarm time

Pos: 50 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Ei nstellungen Änderung smenü/Einstellungen W eckzeit- 8215 @ 21\mod_1331 549231508_15.doc x @ 202678 @ @ 1

Fig. 11:

If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

In step 2 "Alarm time" the following functions become available:

No. Function

1 Alarm time

- When confirming with the Prog button you switch to menu item "Alarm time".

3 Set the hours

- Set the hours with the "plus / minus" buttons.

- Confirm the hours entered with the PROG button.

Set the minutes

- Set the minutes with the "plus / minus" buttons.

- Confirm the minutes by pressing the PROG button. You simultaneously switch to the next processing

step.

Pos: 51 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

weckzeit

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 18 —

Pos: 52 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/U - Z/Uhrzeit @ 22\mod_133155822 3312_15.docx @ 202839 @ 3 @ 1

4.4.3 Time

Pos: 53 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Eins tellungen Änderungs menü/Einstellungen Uhrzeit - 8215 @ 21\mod_13315 49852087_15.docx @ 202751 @ @ 1

Fig. 12:

If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

In step 3 "Time" the following functions become available:

- After completing the settings, the time is only shown on the deactivated display when the "Alarm call function"

in step 3 of the basic functions has been set on "Active", see chapter "Adjusting the device" on page6.

No. Function

1 Time

- When confirming with the Prog button you switch to menu item "Time".

2 Set the hours

- Set the hours with the "plus / minus" buttons.

- Confirm the hours entered with the PROG button.

3 Set the minutes

- Set the minutes with the "plus / minus" buttons.

- Confirm the minutes by pressing the PROG button. You simultaneously switch to the next processing

step.

Pos: 54 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

UHRZEIT

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 19 —

Pos: 55 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/S - T/Sender @ 22\mod_133155835 1287_15.docx @ 202895 @ 3 @ 1

4.4.4 Transmitter

Pos: 56 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Eins tellungen Änderungs menü/Einstellungen Sen der - 8215 @ 21\mod_133154925 7641_15.docx @ 202708 @ @ 1

Fig. 13:

If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

In step 4 "Station" the following functions become available:

No. Function

1 Transmitter

- When confirming with the Prog button you switch to menu item "Station".

2 Set the radio station

Select between the following options with the "plus / minus" buttons:

Save

- Delete

– Exit

3 Save

If you wish to search for and store a new radio frequency, confirm this menu item with the Prog button.

- Search for the suitable radio frequencies with the "plus or minus" buttons.

Tip: If you keep the "plus / minus" buttons pressed for approximately 5 seconds, the next most powerful

station will be displayed.

- Confirm the manual selection of the station with the Prog button.

- Search for a memory location (location 1-8) with the "plus or minus buttons.

- Confirm the memory location with the Prog button.

Repeat these steps until you have saved or overwritten all suitable stations.

- Confirm the display "Saved" with the Prog button.

- Select "Yes" with the "plus or minus" buttons for additional changes to the memory, or "No" to exit this

menu item.

4 Delete

If you wish to delete stations, confirm menu item "Delete" with the Prog button.

- Use the "plus / minus" buttons to select the station to be deleted.

- Confirm your selection with the Prog button.

- The selected station location is now deleted and can, if required, be occupied again as described in no.

5 Exit

- If you wish to exit processing item "Station", confirm menu item "Exit" with the Prog button. You

simultaneously switch to the next processing step.

Pos: 57 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

Sender

Operating Instructions

Busch-AudioWorld

Operation

Operating Instructions | 1473-1-7955 — 20 —

Pos: 58 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/U - Z/Version @ 25\mod_1340 867960196_15.docx @ 2205 23 @ 3 @ 1

4.4.5 Version

Pos: 59 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Eins tellungen Änderungs menü/Version - 8215 @ 25\ mod_1340868018721_15. docx @ 220537 @ @ 1

Fig. 14:

If this function is not relevant for you, you can change to the next menu item by pressing the "plus or minus"

button.

In step 5 "Version" the following functions become available:

No. Function

1 Version

- When confirming with the Prog button you switch to menu item "Version".

Read the version of the device.

5 Exit

- If you wish to exit menu item "Version", confirm this menu item with the Prog button. You simultaneously

switch to the next processing step.

Pos: 60 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/A - F/Beenden @ 22\mod_13315583 88401_15.docx @ 202909 @ 3 @ 1

4.4.6 Quit

Pos: 61 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/AudioVideo/Eins tellungen Änderungs menü/Einstellungen Bee nden - 8215 @ 22\mod_1331550 909450_15.doc x @ 202766 @ @ 1

Fig. 15:

In step 6 "Quit" the following functions become available:

No. Function

1 Quit

- When all changes to the settings have been carried out, confirm this menu item with the Prog button.

Pos: 62 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

PROG

version

PROG

beenden

Page is loading ...