ABB 83310-500 is an auxiliary power supply for the ABB-Welcome door communication system, which can be used to enhance the functionality of your home's door entry system. It operates exclusively with components from this system and must be installed on mounting rails according to DIN EN 500022. The device features a switch for the terminal resistor, a status LED, connections for the system controller, indoor stations, and power supply. It supports up to 4 pairs of wires for indoor stations and has a maximum volume of 80 dB.
ABB 83310-500 is an auxiliary power supply for the ABB-Welcome door communication system, which can be used to enhance the functionality of your home's door entry system. It operates exclusively with components from this system and must be installed on mounting rails according to DIN EN 500022. The device features a switch for the terminal resistor, a status LED, connections for the system controller, indoor stations, and power supply. It supports up to 4 pairs of wires for indoor stations and has a maximum volume of 80 dB.
0073-1-7524 │ │ 22.02.2012
ABB-Welcome
Pos: 2 /DinA4 - Anleitungen O nline/Inhalt/K NX/DoorEntry/83310/ Titelblatt - 83310 - ABB @ 19\mod_132 3174018866_15.doc x @ 111018 @ @ 1
83310-500
83310
-515
Auxiliary power supply
=== Ende der Liste für Te xtmarke Cover ===
ABB
-Welcome
| 0073-1-7524
— 2 —
Pos: 4 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Doku mentation/Inhal tsverzeichnis (--> Für alle Dokumente <--)/Inhaltsverzei chnis @ 19\mod_132064904 4386_15.docx @ 109653 @ @ 1
1 Safety ....................................................................................................................................................................... 3
2 Intended use ............................................................................................................................................................ 3
3 Environment ............................................................................................................................................................. 3
3.1 ABB devices ............................................................................................................................................ 3
4 User Manual............................................................................................................................................................. 3
5 Operation ................................................................................................................................................................. 4
5.1 Standard operation ................................................................................................................................. 4
5.2 Adjusting the device ................................................................................................................................ 5
5.2.1 Terminal resistor ..................................................................................................................................... 5
6 Technical data.......................................................................................................................................................... 6
7 Mounting / Installation .............................................................................................................................................. 7
7.1 Requirements for the electrician ............................................................................................................. 7
7.2 General installation instructions .............................................................................................................. 7
7.3 Mounting ................................................................................................................................................. 8
7.4 Connection .............................................................................................................................................. 8
=== Ende der Liste für Te xtmarke TOC ===
ABB
-Welcome
Safety
| 0073-1-7524
— 3 —
Pos: 6 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Doku mentation/Übersc hriften (--> Für alle Dokumente < --)/1. Ebene/S - T/Sicher heit @ 18\mod_1302612791790_1 5.docx @ 103357 @ 1 @ 1
1 Safety
Pos: 7 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Doku mentation/Sic herheit (--> Für alle Dokumente <--)/W arnhinweise/Sicher heit - 230 V @ 18\mod_130260681 6750_15.docx @ 103308 @ @ 1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 230 V.
– Work on the 230V supply system may only be performed by authorised electricians!
– Disconnect the mains power supply prior to installation and/or disassembly!
Pos: 8 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Doku mentation/Übersc hriften (--> Für alle Dokumente < --)/1. Ebene/A - F/Bestimmungsge mäßer Gebrauch @ 18\mod_130 2763321316_15.doc x @ 103483 @ 1 @ 1
2 Intended use
Pos: 9 /DinA4 - Anleitungen O nline/Inhalt/K NX/DoorEntry/83310/ Bestimmungsgemaesser Gebrauch - 83310-500 @ 19\mo d_1323173967290_1 5.docx @ 111009 @ @ 1
The 83310-500 auxiliary power supply is an integral part of the ABB-Welcome door communication system and
operates exclusively with components from this system. The device must only be installed on mounting rails
according to DIN EN 500022.
Pos: 10 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Übersc hriften (--> Für alle Dokument e <--)/1. Ebene/U - Z/U mwel t @ 18\mod_130 2614158967_15.doc x @ 103383 @ 1 @ 1
3 Environment
Pos: 11 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Umwelt ( --> Für alle Dokumente <--)/ Hinwei se/ Hinwei s - Umwelt - Hinwei s Elektrogeräte @ 18\mod_130 2763973434_15.doc x @ 103500 @ @ 1
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with domestic waste.
– The device contains valuable raw materials which can be recycled. Therefore, dispose of the
device at the appropriate collecting depot.
Pos: 12 /DinA4 - Anleitungen Online/Ueberschri ften/2./ABB Geraete @ 19\ mod_1323162843832_1 5.docx @ 110875 @ 2 @ 1
3.1 ABB devices
Pos: 13 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Umwelt ( --> Für alle Dokumente <--)/Hinwei se/ Hinwe is - Umwelt - ABB Elektr ogeräte @ 19\mod_1323162 745839_15.doc x @ 110867 @ @ 1
All packaging materials and devices from ABB bear the markings and test seals for proper disposal. Always
dispose of the packaging material and electric devices and their components via the authorized collecting depots
and disposal companies.
ABB products meet the legal requirements, in particular the laws governing electronic and electrical devices and
the REACH ordinance.
(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)
Pos: 14 /DinA4 - Anleitungen Online/Ueberschri ften/1./Anwenderh andbuch @ 19\mod_13093472 27593_15.docx @ 107473 @ 1 @ 1
4 User Manual
Pos: 15 /DinA4 - Anleitungen On line/Inhalt/KNX/DoorEn try/Systemhandbuch/ Anwenderhandbuch - ABB @ 19\mod_132316315799 7_15.docx @ 110883 @ @ 1
Detailed information for planning ABB-Welcome systems is contained in the user manual. Download at
www.Busch-Jaeger.com.
Pos: 16 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Steuer module - Onli ne-Doku mentation (--> Für alle Dokumen te <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1
ABB
-Welcome
Operation
| 0073-1-7524
— 4 —
Pos: 17 /DinA4 - Anleitung en Online/Ueberschr iften/1./Bedienun g @ 18\mod_1302613924165_ 15.docx @ 103365 @ 1 @ 1
5 Operation
Pos: 18 /DinA4 - Anleitungen Online/Ueberschri ften/2./Normaler Betrieb @ 18\mod_130276882 0965_15.docx @ 103540 @ 2 @ 1
5.1 S tandard operation
Pos: 19 /DinA4 - Anleitungen On line/Inhalt/KNX/DoorEn try/83310/Bedienung - 83310 @ 18\mod_ 1303216853392_15. docx @ 103787 @ @ 1
Fig. 1:
No.
Func tion
1
Switch for the terminal resistor (see also chapter "Terminal resistor" on page 5)
The terminal resistor is switched off.
The terminal resistor is switched on.
2
Status LED
The status LED lights up permanently = the device is operating
The status LED flashes slowly = the device is operating
The status LED flashes fast = there is an error
3
• Connection for the system controller
• When using several indoor stations: connection for the internal bus
4
Indoor stations (max. 4 pairs of wires)
• Connections for the indoor stations
• When using several indoor stations: connection for the internal bus
5
Power supply
Pos: 20 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Steuer module - Onli ne-Doku mentation (--> Für alle Dokumen te <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1
ABB
-Welcome
Operation
| 0073-1-7524
— 5 —
Pos: 21 /DinA4 - Anleitungen Online/Ueberschri ften/2./Geraeteein stellungen @ 18\mod_130 2768847744_15.doc x @ 103548 @ 2 @ 1
5.2 Adjus ting the device
Pos: 22 /DinA4 - Anleitungen Online/Ueberschr iften/3./Abschlu sswiderstand @ 19\mod_132 1958079906_15.doc x @ 110083 @ 3 @ 1
5.2.1 Terminal resistor
Pos: 23 /DinA4 - Anleitungen Online/Inhalt/K NX/DoorEntry/Bedi enung/Abschlusswider stand setzen 83310- xxx @ 19\mod_1312372134009 _15.docx @ 108373 @ @ 1
Fig. 2: Setting the terminal resistor on the device
• In pure audio installations always set the terminal resistor (1) on "OFF".
• In video installations or mixed audio and video installations set the terminal resistor for the the last devices of
a branch on "ON".
Pos: 24 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Steuer module - Onli ne-Doku mentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1
ABB
-Welcome
Technical data
| 0073-1-7524
— 6 —
Pos: 25 /DinA4 - Anleitungen Online/Ueberschri ften/1./Technische D aten @ 18\mod_13026158630 01_15.docx @ 103416 @ 1 @ 1
6 Technical data
Pos: 26 /DinA4 - Anleitungen Online/Inhalt/K NX/DoorEntry/83310/ Technische Daten - 83310 @ 18\ mod_1303216854283_15. docx @ 103819 @ @ 1
Des ignation
Value
Operating temperature
-5° C – + 45° C (EN 50486)
Storage temperature
-20° C – +70° C
Protection
IP 20
Connection cross section for 230 V
• Single-wire clamps
2 x 0.6 mm² – 2 x 1 mm²
• Fine-wire clamps
2 x 0.6 mm² – 2 x 0.75 mm²
Volume
Maximum 80 dB
Mains voltage
100-240 V, 50 / 60 Hz, 0.9 A
Indoor stations for
direct connection 4
Size
8 TE
Bus voltage
28 V- ±2 V
Pos: 27 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Steuer module - Onli ne-Doku mentation (--> Für alle Dokumen te <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1
ABB
-Welcome
Mounting / Installation
| 0073-1-7524
— 7 —
Pos: 28 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Übersc hriften (--> Für alle Dokument e <--)/1. Ebene/M - O/Montage / I nstallation @ 18\mod_13026139 66111_15.docx @ 103373 @ 1 @ 1
7 Mounting / Installation
Pos: 29 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Sic herheit (--> Für alle Dokumente < --)/Warnhinweise/Sicher heit - Niederspannungs- und 230 V-Leitungen @ 18\mod_1 302617821491_15.doc x @ 103465 @ @ 1
Warning
Electric voltage!
Risk of death and fire due to electrical voltage of 230 V.
– Low-voltage and 230 V cables must not be installed together in a flush-mounted socket!
In case of a short-circuit there is the danger of a 230 V load on the low-voltage line.
Pos: 30 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Sic herheit (--> Für alle Dokumente < --)/Warnhinweise/Sicher heit - Fachkenntnisse @ 18\ mod_1302774384017_15. docx @ 103564 @ 2 @ 1
7.1 R equirements for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering knowledge and experience.
• Incorrect installation endangers your life and that of the user of the electrical system.
• Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation are as follows:
• Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect from power;
2. Secure against being re-connected;
3. Ensure there is no voltage;
4. Connect to earth;
5. Cover or barricade adjacent live parts.
• Use suitable personal protective clothing.
• Use only suitable tools and measuring devices.
• Check the type supply network (TN system, IT system, TT system) to secure the following
power supply conditions (classic connection to ground, protective earthing, necessary
additional measures, etc.).
Pos: 31 /DinA4 - Anleitungen On line/Inhalt/KNX/DoorEn try/Montage/Mon tagehinweise - Allge mein @ 19\mod_1310563670478_ 15.docx @ 107743 @ 2 @ 1
7.2 General ins tallation instructions
• Terminate all branches of the wiring system via a connected bus device (e.g., indoor station, outdoor station,
system device).
• Do not install the system controller directly next to the bell transformer and other power supplies (to avoid
interference).
• Do not install the wires of the system bus together with 230 V wires.
• Do not use common cables for the connecting wires of the door openers and wires of the system bus.
• Avoid bridges between different cable types.
• Use only two wires for the system bus in a four-core or multi-core cable.
• When looping, never install the incoming and outgoing bus inside the same cable.
• Never install the internal and external bus inside the same cable.
Pos: 32 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Steuer module - Onli ne-Doku mentation (--> Für alle Dokumen te <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ @ 1
ABB
-Welcome
Mounting / Installation
| 0073-1-7524
— 8 —
Pos: 33 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Übersc hriften (--> Für alle Dokument e <--)/2. Ebene/M - O/Montage @ 18\mod_13 02615960458_15.doc x @ 103424 @ 2 @ 1
7.3 Mounting
Pos: 34 /DinA4 - Anleitungen On line/Inhalt - Montage/Montage - Hu tschienen nach DIN EN 500022 @ 18\ mod_1303218164750 _15.docx @ 103868 @ @ 1
The device 83310-500 must only be installed on mounting rails according to DIN EN 500022.
Pos: 35 /DinA4 - Anleitungen Online/Ueberschri ften/2./Anschlu ss @ 18\mod_1302617573351_15. docx @ 103449 @ 2 @ 1
7.4 Connection
Pos: 36 /DinA4 - Anleitungen On line/Inhalt/KNX/DoorEn try/83310/Anschluss - 83310 @ 18\ mod_1303216853127_15. docx @ 103779 @ @ 1
Fig. 3:
No.
Function
1
• Connection for the system controller
• When using several indoor stations: connection for the internal bus
2
Indoor stations (max. 4 pairs of wires)
• Connections for the indoor stations
• When using several indoor stations: connection for the internal bus
3
Power supply
=== Ende der Liste für Te xtmarke Content ===
ABB
-Welcome
0073-1-7524 | | 22.02.2012
Pos: 38 /Busch-Jaeger (Neustruktur)/Modul-S truktur/Online-Dok umentation/Rücksei ten (--> Für alle Dokumente <--) /Rückseite - Busch-J aeger - Allgemein @ 20\mod_1327320 074886_15.doc x @ 137103 @ @ 1
A
member of the ABB Group
Busch
-Jaeger Elektro GmbH
PO box
58505 Lüdenscheid
Freisenbergstraße 2
58513 Lüdenscheid
Germany
www.BUSCH
-JAEGER.com
info.bje@de.abb.com
Central sales service:
Phone:
+49 180 5 669900
Fax:
+49 180 5 669909
Notice
We reserve the right to at all times make
technical changes as well as changes to the
contents of this document without prior notice.
The detailed specifications agreed to at the time
of ordering apply to all orders.
ABB accepts no
responsibility for possible errors or
incompleteness in this document.
We reserve all rights to this document and the
topics and illustrations contained therein. The
document and its contents, or extracts thereof,
must not be reproduced, transmitted or reused by
third parties without prior written consent by ABB.
Copyright© 2012
Busch-Jaeger Elektro GmbH
All rights reserved
=== Ende der Liste für Te xtmarke Backcover ===
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
ABB 83310-500 User manual
- Type
- User manual
- This manual is also suitable for
ABB 83310-500 is an auxiliary power supply for the ABB-Welcome door communication system, which can be used to enhance the functionality of your home's door entry system. It operates exclusively with components from this system and must be installed on mounting rails according to DIN EN 500022. The device features a switch for the terminal resistor, a status LED, connections for the system controller, indoor stations, and power supply. It supports up to 4 pairs of wires for indoor stations and has a maximum volume of 80 dB.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ABB 83300-500; 83300-515 User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Dell C2665dnf Color Laser Printer Owner's manual
-
Dell C7765DN MFP Color Laser Printer Owner's manual
-
Krone BA EasyCut TS 320 Operating instructions
-
-
-
Testo 316-3 User manual
-
-
Busch-Jaeger Busch-free@home Home Automation Control Panel User manual
-
Krone BA EasyCut 2801CV/3201CV/3600 CV Operating instructions
-