ABB Busch-Wächter Operating Instructions Manual

Brand: ABB

Model: Busch-Wächter

Type: Operating Instructions Manual

1473-1-8140 │ 19.08.2013

Operating Instructions

Busch-Wächter

Pos: 2 /#Neustruktur#/ Online-Dokumentatio n (+KNX)/Titelblät ter/Waechter/ Titelblatt - 6841 - IR-Handsender @ 28\mod_1347354023887_15. docx @ 232625 @ @ 1

6841-101-500

IR remote control

=== Ende der Liste für Te xtmarke Cover ===

Operating Instructions

Busch-Wächter

Operating Instructions | 1473-1-8140

— 2 —

Pos: 4 /#Neustruktur#/ Online-Dokumentatio n (+KNX)/Inhaltsver zeichnis (--> Für alle Dokume nte <--)/Inhaltsverzeic hnis @ 19\mod_1320649044386_ 15.docx @ 109653 @ @ 1

Intended use ............................................................................................................................................................ 3

2 Environment ............................................................................................................................................................. 3

3 Setup and function ................................................................................................................................................... 4

3.1 Features of function and equipment ........................................................................................................ 4

3.2 Possible combinations ............................................................................................................................ 5

4 Operation ................................................................................................................................................................. 6

4.1 Brightness switching threshold ................................................................................................................ 7

4.2 Presence simulation ................................................................................................................................ 7

4.3 Continuous light ...................................................................................................................................... 7

5 Technical data.......................................................................................................................................................... 8

6 Start-up .................................................................................................................................................................... 8

7 Commissioning ........................................................................................................................................................ 9

7.1 Removing the protective foil .................................................................................................................... 9

7.2 Programming the device ......................................................................................................................... 9

8 Maintenance ............................................................................................................................................................ 9

8.1 Battery change of remote control ............................................................................................................ 9

=== Ende der Liste für Te xtmarke TOC ===

Operating Instructions

Busch-Wächter

Intended use

Operating Instructions | 1473-1-8140

— 3 —

Pos: 6 /#Neustruktur#/ Online-Dokumentatio n (+KNX)/Überschr iften (--> Für alle Doku mente <--)/1. Ebene/A - F/Besti mmungsgemäßer Gebrauc h @ 18\mod_1302763321316_15.doc x @ 103483 @ 1 @ 1

1 Intended use

Pos: 7 /#Neustruktur#/ Online-Dokumentatio n (+KNX)/Bestimmungsge mäßer Gebrauch ( --> Für alle Dokumente <--)/Busc h-Dimmer/Bestimmungsge mäßer Gebrauch @ 23\mod_133 5350449857_15.doc x @ 208763 @ @ 1

The device is to be used exclusively with the components that are supplied and licensed as described in chapter

"Setup and function".

Pos: 8.1 /#Neustruktur#/ Online-Dokumentati on (+KNX)/Überschr iften (--> Für alle Dokumente <--) /1. Ebene/U - Z/U mwelt @ 18\mod_1302 614158967_15.doc x @ 103383 @ 1 @ 1

2 Environment

Pos: 8.2 /#Neustruktur#/ Online-Dokumentati on (+KNX)/Sic herheitshinweise und Hinw eise (--> Für alle Dokumente <--) /Hinweise - Umwe lt/Hi nwei s - Umwe lt - Hin weis Elektrogeräte mit Bat terien @ 24\mod_133769211 5760_15.docx @ 212133 @ @ 1

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with domestic waste.

- The device contains valuable raw materials which can be recycled. Therefore, dispose of the

device at the appropriate collecting depot.

– Do not dispose of the batteries with domestic waste. Take the used batteries to the collecting

depot for recycling. Many retailers have collection boxes for used batteries.

Pos: 8.3 /#Neustruktur#/ Online-Dokumentati on (+KNX)/Sic herheitshinweise und Hinw eise (--> Für alle Dokumente <--) /Hinweise - Umwe lt/Hi nwei s - Umwe lt - Entsor gung Elektrogeräte @ 20\mod_1325760695972_15. docx @ 136583 @ @ 1

All packaging materials and devices bear the markings and test seals for proper disposal. Always dispose of the

packaging material and electric devices and their components via the authorized collecting depots and disposal

companies.

The products meet the legal requirements, in particular the laws governing electronic and electrical devices and

the REACH ordinance.

(EU Directive 2002/96/EC WEEE and 2002/95/EC RoHS)

(EU REACH ordinance and law for the implementation of the ordinance (EC) No.1907/2006)

Pos: 9 /#Neustruktur#/ Online-Dokumentatio n (+KNX)/Steuermo dule - Onli ne-Dokumentation ( --> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1

Operating Instructions

Busch-Wächter

Setup and function

Operating Instructions | 1473-1-8140

— 4 —

Pos: 10 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Überschr iften (--> Für alle Dokumente <--)/ 1. Ebene/A - F/Aufbau und Funktion @ 11\mod_1279185435352_15. docx @ 83027 @ 111 @ 1

3 Setup and function

Pos: 11 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Aufbau und Funk tion/Waechter/ Funktionen - 6841-101 IR-Hands ender @ 37\mod_137689034 5039_15.docx @ 299382 @ 22222 22222 @ 1

The IR remote control has been specially developed for the customer for commissioning the Busch-Watchdog

movement detectors. The functions and settings can be comfortably controlled without a ladder or an electrical

installer. For this the IR remote control have to be aligned directly to the Busch-Watchdog movement detector.

The IR remote control serves for adjusting Busch-Watchdog devices.

The IR remote control 6841-101 can only be operated with Bush-Watchdogs 110 MasterLINE and

220 / 280 MasterLINE.

Pos: 12 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Überschr iften (--> Für alle Dokumente <--)/ 2. Ebene/A - F/Funktions- und Au sstattungsmerk male @ 23\mod_133655763014 0_15.docx @ 209136 @ 22222 @ 1

3.1 Features of function and equipment

Pos: 13 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Aufbau und Funk tion/Waechter/ Ausstattungsmerkma le - 6841-101 IR-Handsender @ 30\mod_1348119277017_1 5.docx @ 237463 @ 1222 @ 1

Busch-Watchdog 110 MasterLINE

Busch-Watchdog 220 MasterLINE / select / premium

• Busch-Watchdog 280 MasterLINE

Option

Function

1 Brightness switching threshold

2 Presence simulation

3 Continuous light

The maximum coverage of the IR remote control is 6 m.

Pos: 14 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Steuermodu le - Onlin e-Dokumentatio n (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ 222 @ 1

Operating Instructions

Busch-Wächter

Setup and function

Operating Instructions | 1473-1-8140

— 5 —

Pos: 15 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Übersc hriften (--> Für alle Dokumente <--) /2. Ebene/G - L/Kombinations möglichkeiten @ 19\mod_132 0312769153_15.doc x @ 109520 @ 222 @ 1

3.2 Possible combinations

Pos: 16 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Kombina tionsmöglichkeiten/ Waechter/Kombinati onsmöglichkeite n - 6841-101 IR-Handsender @ 28\ mod_1347357889716_15. docx @ 232722 @ 111 @ 1

6841-101

6855 – 110 MasterLINE

6847 – 220 MasterLINE

select

6848 – 220 MasterLINE

premium

6847-6867 – 220 -280

MasterLINE

Pos: 17 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Steuermodu le - Onlin e-Dokumentatio n (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc x @ 52149 @ 122222222 @ 1

Operating Instructions

Busch-Wächter

Operation

Operating Instructions | 1473-1-8140

— 6 —

Pos: 18 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Überschr iften (--> Für alle Dokumente <--)/ 1. Ebene/A - F/Bedienung @ 11\mod_12 79185541649_15.doc x @ 83043 @ 212222222 @ 1

4 Operation

Pos: 19 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienung/ Waechter/Bedi enung - 6841 IR-Handsender @ 28\mo d_1347354237576_15.doc x @ 232638 @ 22112122 @ 1

Fig. 1: Operation

The following settings can be made with the IR remote control:

No. Function

1 Resetting the brightness limit value to the settings of the potentiometers on the device.

2 Setting the current brightness as brightness limit value.

3 Deactivation of presence simulation.

4 Activation of presence simulation.

– Continuous light between twilight and 22:30 p.m. CET or 23:30 CEST. Followed by movement detection.

5 Light deactivation for 4 hours (no detection of movement).

6 Light activation for 4 hours (no detection of movement).

7 Deactivating automatic movement detection and 4 hours light On / Off.

Operating Instructions

Busch-Wächter

Operation

Operating Instructions | 1473-1-8140

— 7 —

4.1 Brightness switching threshold

OFF

Deletes the brightness switching threshold stored via the remote control

and activates the setting of the brightness potentiometer on the device.

LUX Memo

Info / symbol of the "Brightness switching threshold" setting option.

Stores the current brightness value as brightness threshold value on the

device.

4.2 Presence simulation

OFF

Deactivates presence simulation.

There is a reset to the operating mode that was active prior to the

activation.

Person / house

Symbol of the "Presence simulation" setting option.

Activation of the presence simulation.

- Activation of light during twilight

– Switchover to automatic mode at approximately 22:30 p.m.

When presence simulation is activated, this gives the impression that persons are present in the house and is

therefore ideal for when you are away on holiday.

4.3 Continuous light

Continuous OFF / lamp is crossed out

The movement detector is activated for four hours. It then automatically

returns to the prior operating mode.

AUTO

Early pressing of the "AUTO" button reverts back to the previous

operating mode, the one that was active prior to pressing the continuous

light ON button.

Continuous light ON / lamp is on

The movement detector is activated for four hours. It is also active when

no one is within the detection range, but light is still required.

It then automatically returns to the prior operating mode.

Pos: 20 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Steuermodu le - Onli ne-Dokumen tation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ 12 @ 1

Operating Instructions

Busch-Wächter

Technical data

Operating Instructions | 1473-1-8140

— 8 —

Pos: 21 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Überschr iften (--> Für alle Dokumente <--)/ 1. Ebene/S - T/Technische Date n @ 11\mod_1279185386320_ 15.docx @ 83019 @ 22 @ 1

5 Technical data

Pos: 22 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Technisc he Daten/Waechter /Technische Daten - 6841 IR-Hands ender @ 28\mod_134735429 0389_15.docx @ 232652 @ 11 @ 1

Designation

Value

Operating voltage 3 V

Battery type CR 2025

Battery life Approximately 2 years

Horizontal detection (coverage)

• Busch-Watchdog 220/280 MasterLINE Maximum of 6 m

• Busch-Watchdog 110 MasterLINE Maximum of 2 m

Operating temperature 0°C … 45°C

Protection type IP 40

Pos: 23 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Überschr iften (--> Für alle Dokumente <--)/ 1. Ebene/A - F/Erstinbetri ebnahme @ 17\mod_12992346493 40_15.docx @ 100978 @ 2212222 @ 1

6 Start-up

Pos: 24 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Erstinbe triebnahme/Waec hter/Erstinbetriebna hme - 6841 - IR Handsender @ 29\ mod_1347603166970_15. docx @ 233604 @ 22122 @ 1

Note

The IR remote control is coded and must be programmed to the Busch-Watchdog during

commissioning (see chapter Fehler! Verweisquelle konnte nicht gefunden werden.

"Programming the device" on page Fehler! Textmarke nicht definiert.).

This code (16 bit, corresponds to 65,536 possible variations) prevents movement detectors in the

surrounding area to be influenced unintentionally or deliberately.

Pos: 25 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Steuerm odule - Onli ne-Dokumentati on (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0. docx @ 52149 @ 1111 @ 1

Operating Instructions

Busch-Wächter

Commissioning

Operating Instructions | 1473-1-8140

— 9 —

Pos: 26 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Überschr iften (--> Für alle Dokumente <--)/ 1. Ebene/G - L/Inbetriebnah me @ 11\mod_1279185496977_ 15.docx @ 83035 @ 22221122222 @ 1

7 Commissioning

Pos: 27 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Inbetriebn ahme/Waechter/ Inbetriebnahme - 6841 I R-Handsender @ 28\mod_134735432 4124_15.docx @ 232666 @ 11111 11122 @ 1

7.1 Removing the protective foil

Fig. 2: Protective foil on the battery

1. Remove the protective foil from the battery before commissioning.

7.2 Programming the device

Fig. 3: Remote control

2. Press the "AUTO" button on the remote control for at least 3 seconds within the period of 10 minutes after

activating the power on the Busch-Watchdog.

- The Busch-Watchdog must be de-energized for at least 30 seconds.

- The remote control will then automatically connect itself to the Busch-Watchdog, and the Busch-

Watchdog will flash if the reception is correct.

- Repeat these steps to program a maximum of 9 additional remote controls.

Pos: 28 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Überschr iften (--> Für alle Dokumente <--)/ 1. Ebene/U - Z/Wartung @ 21\mod_132 8188606500_15.doc x @ 138248 @ 111111 @ 1

8 Maintenance

Pos: 29 /#Neustruktur #/Online-Dokumenta tion (+KNX)/War tung/Waechter/Wartung - 6841 - IR-Handsender @ 28\mod_1347354354 592_15.docx @ 232680 @ 111 @ 1

8.1 Battery change of remote control

Fig. 4: Changing the battery

1. Pull the battery holder out of the remote control.

2. Insert a new battery of type 2025. The plus pole of the battery (+) must be on top.

3. Push the battery holder back into the device.

=== Ende der Liste für Te xtmarke Content ===

CR 2025

Operating Instructions

Busch-Wächter

1473-1-8140 | 19.08.2013

Pos: 31 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Rücksei ten (--> Für alle Dokumente <--)/Rüc kseite - BJE-Variante @ 32\mod_135 7201421897_15.doc x @ 262132 @ @ 1

A member of the ABB Group

Busch-Jaeger Elektro GmbH

PO box

58505 Lüdenscheid

Freisenbergstraße 2

58513 Lüdenscheid

Germany

www.BUSCH-JAEGER.de

info.bje@de.abb.com

Central sales service:

Phone: +49 (0) 2351 956-1600

Fax: +49 (0) 2351 956-1700