ABB Busch-Watchdog 70 MasterLINE Operating Instructions Manual

Brand: ABB

Model: Busch-Watchdog 70 MasterLINE

Type: Operating Instructions Manual

1473-1-8134 │ Rev. 01 │ 11.2012

Operating Instructions

Busch-Wächter

Pos: 2 /#Neustruktur#/ Online-Dokumentati on (+KNX)/Titelbl ätter/Waechter /Titelblatt - 6854 -- BJ E @ 24\mod_1338444887984_15. docx @ 214436 @ @ 1

6854-500 AGM-…

70 MASTERLINE

=== Ende der Liste für Textmarke Cover ===

Operating Instructions

Busch-Wächter

Operating Instructions | 1473-1-8134 — 2 —

Pos: 4 /#Neustruktur#/ Online-Dokumentati on (+KNX)/Inhalts verzeichnis (- -> Für alle Dokumente <-- )/Inhaltsverzeichni s @ 19\mod_1320649044386_ 15.docx @ 109653 @ @ 1

Safety ....................................................................................................................................................................... 3

2 Intended use ............................................................................................................................................................ 3

3 Environment ............................................................................................................................................................. 3

4 Setup and function ................................................................................................................................................... 4

4.1 Features of function and equipment ........................................................................................................ 4

4.2 Detection ranges ..................................................................................................................................... 4

4.2.1 Overview of the detection ranges ............................................................................................................ 4

5 Technical data.......................................................................................................................................................... 5

6 Installation and electrical connection ....................................................................................................................... 6

6.1 Requirements for the electrician ............................................................................................................. 6

6.2 Mounting ................................................................................................................................................. 7

6.2.1 Installation sites ...................................................................................................................................... 7

6.2.2 Preparing the installation ......................................................................................................................... 8

6.2.3 Mounting steps ........................................................................................................................................ 9

6.3 Electrical connection ............................................................................................................................. 11

6.3.1 Standard connection ............................................................................................................................. 11

6.3.2 Standard connection with extension unit push-button ........................................................................... 11

6.3.3 Standard connection with triple-step switch .......................................................................................... 12

6.3.4 Standard connection with RC suppressor 6899 and relay .................................................................... 12

7 Commissioning ...................................................................................................................................................... 13

7.1 Setting the coverage ............................................................................................................................. 13

7.2 Activation test ........................................................................................................................................ 13

8 Operation ............................................................................................................................................................... 14

8.1 Standard operation ............................................................................................................................... 14

8.2 Function status LED .............................................................................................................................. 14

8.3 Auxiliary post operation ......................................................................................................................... 15

8.3.1 Operation with extension unit push-button ............................................................................................ 15

=== Ende der Liste für Te xtmarke TOC ===

Operating Instructions

Busch-Wächter

Safety

Operating Instructions | 1473-1-8134 — 3 —

Pos: 6 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/S - T/Sicherheit @ 18\mod_130 2612791790_15.doc x @ 103357 @ 1 @ 1

1 Safety

Pos: 7 /#Neustruktur#/Online-Dokumentation (+KNX)/Sicherheitshinweise und Hinweise (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - 230 V @ 18\mod_1302606816750_1 5.docx @ 103308 @ @ 1

Warnin

Electric voltage!

Risk of death and fire due to electrical voltage of 230 V.

– Work on the 230V supply system may only be performed by authorised electricians!

– Disconnect the mains power supply prior to installation and/or disassembly!

Pos: 8 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Bestimmungsgemäßer Gebr auch @ 18\mod_1302763321316 _15.docx @ 103483 @ 1 @ 1

2 Intended use

Pos: 9 /#Neustruktur#/ Online-Dokumentati on (+KNX)/Besti mmungsgemäßer Gebrauch ( --> Für alle Dokumente <- -)/Busch-Dimmer/Besti mmungsgemäßer Gebrauc h @ 23\mod_13353504498 57_15.docx @ 208763 @ @ 1

The device is to be used exclusively with the components that are supplied and licensed as described in chapter

"Setup and function".

Pos: 10.1 /#Neustrukt ur#/Modul-Strukt ur/Online-Dokumen tation/Überschr iften (--> Für alle Dokument e <--)/1. Ebene/U - Z/Um welt @ 18\mod_1302614158 967_15.docx @ 103383 @ 1 @ 1

3 Environment

Pos: 10.2 /#Neustruktur#/Online-Dokumentation (+KNX)/Sicherheitshinweise und Hinweise (--> Für alle Dokumente <--)/Hinweise/Hinweis - Umwelt - Hinweis Elektrogeräte @ 18\ mod_1302763973434_15. docx @ 103500 @ @ 1

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with domestic waste.

– The device contains valuable raw materials which can be recycled. Therefore, dispose of the

device at the appropriate collecting depot.

Pos: 10.3 /#Neustruktur#/Online-Dokumentation (+KNX)/Sicherheitshinweise und Hinweise (--> Für alle Dokumente <--)/Hinweise/Hinweis - Umwelt - Entsorgung Elektrogerät e @ 20\mod_1325760695972_ 15.docx @ 136583 @ @ 1

All packaging materials and devices bear the markings and test seals for proper disposal. Always dispose of the

packaging material and electric devices and their components via the authorized collecting depots and disposal

companies.

The products meet the legal requirements, in particular the laws governing electronic and electrical devices and

the REACH ordinance.

(EU Directive 2002/96/EC WEEE and 2002/95/EC RoHS)

(EU REACH ordinance and law for the implementation of the ordinance (EC) No.1907/2006)

Pos: 11 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ @ 1

Operating Instructions

Busch-Wächter

Setup and function

Operating Instructions | 1473-1-8134 — 4 —

Pos: 12 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Aufbau und Funktion @ 11\mod_127 9185435352_15.doc x @ 83027 @ 111 @ 1

4 Setup and function

Pos: 13 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Aufbau un d Funktion/Waechter /Funktionen - 6854 70 MasterLI NE @ 28\mod_134737385 5300_15.docx @ 232808 @ 2 @ 1

The Busch-Watchdog 70 MasterLINE is a movement detector with a reduced detection range and is suitable for

use in small terraced houses.

Due to the small distance between the pavement and the house, the reduced detection range prevents the light

from being constantly switched on when persons pass the house or when there is movement on the neighboring

property.

The Busch-Watchdogs are passive infrared movement detectors which switch loads via the KNX bus when

sources of heat move within its detection range.

Busch Watchdog is not an intrusion or attack alarm.

Pos: 14 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Funktions- und Aussta ttungsmerkmale @ 23\mod_1 336557630140_15.d ocx @ 209136 @ 2 @ 1

4.1 Features of function and equipment

Pos: 15 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Aufbau un d Funktion/Waechter /Ausstattungsmerk male - 6854 70 MasterLINE @ 29 \mod_1348036639536_1 5.docx @ 233953 @ 111 @ 1

• 12 meters coverage toward the front and 4 meters toward each side.

• 4 Detection levels

• Status display

• Switch-off delay and brightness switching threshold can be adjusted separately

• Reduced detection range

Pos: 16 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Erfassungsbereic he @ 19\mod_1320393658466_ 15.docx @ 109558 @ 22222 @ 1

4.2 Detection ranges

Pos: 17 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/3. Ebene/U - Z/Übersicht der Erf assungsbereiche @ 18\mod_13085 63903037_15.doc x @ 106965 @ 222 @ 1

4.2.1 Overview of the detection ranges

Pos: 18 /#Neustruktur #/Online-Dokumen tation (+KNX)/Erf assungsbereiche/W aechter/Erfassungsber eiche - 6854 - 70 MasterLI NE @ 29\mod_1347536549389 _15.docx @ 233361 @ 33 @ 1

Fig. 1: Coverage

Detection range

• The detection range is 70° and the coverage is 12 m to the front and four meters to each side.

Wall mounting

• The movement detector offers optimum surveillance if mounted to the wall at a maximum height of 2.5 m.

Pos: 19 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ 111 @ 1

12 m

2,5 m

max. 12 m

ca. 8 m

Operating Instructions

Busch-Wächter

Technical data

Operating Instructions | 1473-1-8134 — 5 —

Pos: 20 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/S - T/Technische Daten @ 11\mod _1279185386320_15.doc x @ 83019 @ 22 @ 1

5 Technical data

Pos: 21 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Techni sche Daten/Waec hter/Technische Daten - 6854 @ 24\mod_1338445237653 _15.docx @ 214466 @ 2 @ 1

Designation Value

Nominal voltage 230 V AC ± 10%, 50/60 Hz

Switching capacity 1380 W/VA

Maximum switching current: 6 AX

Maximum power loss < 1 W

Twilight sensor 3, 15, ∞ lux

Switch-off delay 1, 3, 5 minutes

Coverage

(if mounted 2.5 m high)

Maximum of 12 m

Operating temperature -25°C … 55°C

Protection type IP 55

Pos: 22 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Sic herheitshinweise und Hin weise (--> Für alle Dokumente <--)/Hinweise - Allgemein/Hinweis - Anschluss von EVG's - Herstellerangaben @ 24\mod_133845866 0462_15.docx @ 214629 @ 2 @ 1

Information for the connection of ballasts

Please observe the following points regarding high inrush currents for ballasts:

- The ballast manufacturer’s specification determines the possible number of ballasts.

Pos: 23 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ 2222 @ 1

Operating Instructions

Busch-Wächter

Installation and electrical

connection

Operating Instructions | 1473-1-8134 — 6 —

Pos: 24 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/M - O/Montage und elektrisc her Anschluss @ 23\mod_1336 477157864_15.doc x @ 209033 @ 2221111 @ 1

6 Installation and electrical connection

Pos: 25 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Sic herheitshinweise und Hin weise (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - Fachkenntnisse @ 23\mod_1336559183027_1 5.docx @ 209179 @ 2222 @ 1

6.1 Requirements for the electrician

Warnin

Electric voltage!

Install the device only if you have the necessary electrical engineering knowledge and experience.

• Incorrect installation endangers your life and that of the user of the electrical system.

• Incorrect installation can cause serious damage to property, e.g. due to fire.

The minimum necessary expert knowledge and requirements for the installation are as follows:

• Apply the "five safety rules" (DIN VDE 0105, EN 50110):

1. Disconnect from power;

2. Secure against being re-connected;

3. Ensure there is no voltage;

4. Connect to earth and short-circuit;

5. Cover or barricade adjacent live parts.

• Use suitable personal protective clothing.

• Use only suitable tools and measuring devices.

• Check the supply network type (TN system, IT system, TT system) to secure the following

power supply conditions (classic connection to ground, protective earthing, necessary

additional measures, etc.).

Pos: 26 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ 3322333 11333 @ 1

Operating Instructions

Busch-Wächter

Installation and electrical

connection

Operating Instructions | 1473-1-8134 — 7 —

Pos: 27 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/M - O/Montage @ 18\mod_130261596045 8_15.docx @ 103424 @ 3333333 @ 1

6.2 Mounting

Pos: 28 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Sic herheitshinweise und Hin weise (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - 230 V @ 18\mod_130260681675 0_15.docx @ 103308 @ 1322133 @ 1

Warnin

Electric voltage!

Risk of death and fire due to electrical voltage of 230 V.

– Work on the 230V supply system may only be performed by authorised electricians!

– Disconnect the mains power supply prior to installation and/or disassembly!

Pos: 29 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Montage/ Waechter/Montage - 6854 @ 25\mod_1340271054245_ 15.docx @ 219266 @ 2122223 @ 1

Warning

Electric voltage!

Danger from touching current-carrying parts when opening the device.

- Always disconnect the mains voltage before opening the device!

Caution

Risk of damaging the device!

The lens of the device is sensitive and

can easily sustain damage.

- Do not press on the lens when

setting the device!

6.2.1 Installation sites

Fig. 2: Installation sites

• The mounting height of the device should be between 1.7 m and 2.5. m.

• The distance between light and movement detector should be at least 1.5 m.

• For optimum detection of persons the approach into the detection range should always be offset and never

frontal.

>1,7 m

Operating Instructions

Busch-Wächter

Installation and electrical

connection

Operating Instructions | 1473-1-8134 — 8 —

6.2.2 Preparing the installation

To prepare the installation of the device, perform the following steps:

Fig. 3: Preparing the installation

1. Remove the locking screw (1) (if installed).

2. Press in the clamps (2 ... 5) on the sides of the housing with a suitable tool.

3. Carefully remove the front of the device.

Fig. 4: Opening the water drain

Depending on where the device is installed, the water drain may have to be opened.

• To do this, pierce the plastic membrane on the bottom of the device.

The installation is prepared.

Operating Instructions

Busch-Wächter

Installation and electrical

connection

Operating Instructions | 1473-1-8134 — 9 —

6.2.3 Mounting steps

Fig. 5: Fixing to the wall

Connecting terminals

Connection Function

N Neutral conductor

→ switched phase?

L Phase (230 V AC, 50 / 60 Hz)

Grounding conductor connection

1. Mount the device on the wall.

- Do not use countersunk head screws for mounting

to the wall.

- Use screws with a head diameter of 6.5 mm - 8.5

mm.

2. Connect the power to the device, see section 6.3.

- Observe the maximum admissible cable cross

sections.

∅6,5 mm - 8,5 mm

∅3,5 mm - 3,9 mm

mm5,41.xam

²mm

,2 -5,1

Operating Instructions

Busch-Wächter

Installation and electrical

connection

Operating Instructions | 1473-1-8134 — 10 —

- For cable cross sections larger than 1.5 mm² use

only cable entry (B) or (C).

3. To protect the device against unauthorized opening, the

enclosed screw can be used on the bottom of the

device.

- To protect the device against unauthorized opening,

screw the enclosed screw into the bottom of the

device.

Pos: 30 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ 23332 @ 1

Operating Instructions

Busch-Wächter

Installation and electrical

connection

Operating Instructions | 1473-1-8134 — 11 —

Pos: 31 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Elektrischer Ansc hluss @ 21\mod_1328177051724_ 15.docx @ 138042 @ 123333333 @ 1

6.3 Electrical connection

Pos: 32 /#Neustruktur #/Online-Dokumen tation (+KNX)/Anschl uss/Waechter/Ansc hluss - 6854 70 -- MasterLI NE @ 28\mod_1346844068086_15. docx @ 230375 @ 1333 @ 1

6.3.1 Standard connection

Fig. 6: Universal relay insert

6.3.2 Standard connection with extension unit push-button

Fig. 7: Universal relay insert with extension unit push-button

Note

For more information see chapter "Extension unit operation" 8.3 on page 15.

16A

Operating Instructions

Busch-Wächter

Installation and electrical

connection

Operating Instructions | 1473-1-8134 — 12 —

6.3.3 Standard connection with triple-step switch

Fig. 8: Universal relay insert with triple-step switch

The connection is made with a triple-step switch such as 2713 U, 2710 U

Step switch function:

1. Continuous light

2. System off

3. Movement detector

6.3.4 Standard connection with RC suppressor 6899 and relay

Fig. 9: Universal relay insert with RC suppressor 6899 and relay

Pos: 33 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ 22222 @ 1

16A

Operating Instructions

Busch-Wächter

Commissioning

Operating Instructions | 1473-1-8134 — 13 —

Pos: 34 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/G - L/Inbetriebnahme @ 11\mod_127 9185496977_15.doc x @ 83035 @ 22222 @ 1

7 Commissioning

Pos: 35 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Inbetri ebnahme/Waechter /Inbetriebnahme - 6854 @ 25\ mod_1340274623213_1 5.docx @ 219700 @ 222 @ 1

7.1 Setting the coverage

Use the following steps to set the coverage:

Fig. 10: Setting the coverage

1. Set the coverage of the device by turning the controller (1).

- The sensor shifts when the controller is turned. The higher the setting of the sensor the smaller is the

coverage.

- The adjustment range of the sensor ranges from 6 m (sensor position at the top) to a maximum of 12 m

(sensor position at the bottom).

7.2 Activation test

Fig. 11: Control element

To carry out the activation test, perform the following steps:

1. Set selector switch to T/S.

- The device is now in test mode for 10 minutes (daytime operation, switch-off delay 2 sec.). In addition,

each detection is indicated by the status LED flashing quickly.

- After this, the device switches back to standard operating mode.

2. To carry out an additional activation test, set the selector switch back to position T/S or interrupt the operating

voltage supply for more than 15 seconds.

- The device is now in test mode for another 10 minutes. Test mode is exited automatically after 10 minutes

or by adjusting the brightness.

The activation test has been carried out.

Pos: 36 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ 333 @ 1

T/S

min

Operating Instructions

Busch-Wächter

Operation

Operating Instructions | 1473-1-8134 — 14 —

Pos: 37 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Bedienung @ 11\mod_1279185 541649_15.docx @ 83043 @ 3233 333 @ 1

8 Operation

Pos: 38 /#Neustruktur #/Online-Dokumenta tion (+KNX)/Bedienu ng/Waechter/Bedi enung - 6854 @ 24\mod_13384487 58706_15.docx @ 214557 @ 3333 @ 1

8.1 Standard operation

Fig. 12: Control element

Set the ON period and the switch-on brightness on the rotary switch.

ON period and switch-on brightness

Icon Function

ON period during daytime operation

ON period at the start of twilight

ON period during advancing twilight

ON period at the start of twilight

ON period during advancing twilight

T/S

Selector switch

8.2 Function status LED

Fig. 13: Status LED

Status LED (1)

LED Status

-Flashes fast

Detection in test mode

-Flashes 3 times Detection in standard mode

Pos: 39 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_126889866 8093_0.docx @ 52149 @ 2223333 @ 1

T/S

min

Operating Instructions

Busch-Wächter

Operation

Operating Instructions | 1473-1-8134 — 15 —

Pos: 40 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/M - O/Nebenstellenbetri eb @ 18\mod_1308568178899_ 15.docx @ 107029 @ 2222222 @ 1

8.3 Auxiliary post operation

Pos: 41 /#Neustruktur #/Online-Dokumen tation (+KNX)/Nebenst ellenbetreib/W aechter/Nebenstel lenbetrieb - 6854 -- 70 MasterLINE @ 29\mod_1347536933 190_15.docx @ 233375 @ 2222 @ 1

8.3.1 Operation with extension unit push-button

Aside from the movement detector being triggered by the infrared radiation in the detection range, manual

operation is possible via an extension unit push-button.

For example, when an exit is not within the detection range of the movement detector, the extension unit push-

button can be used. The lighting can there be switched on or off manually with the push-button.

Fig. 14: Operation with extension unit push-button

• When operating with an extension unit push-button, the lighting for the set operating mode is switched on.

=== Ende der Liste für Textmarke Content ===

Operating Instructions

Busch-Wächter

1473-1-8134 | Rev. 01 | 11.2012

Pos: 43 /#Neustruktur#/Online-Dokumentation (+KNX)/Rückseiten (--> Für alle Dokumente <--)/Rückseite - Busch-Jaeger - Allgemein @ 28\mod_1347009 779995_15.doc x @ 232282 @ @ 1

member of the ABB Group

Busch-Jaeger Elektro GmbH

PO box

58505 Lüdenscheid

Freisenbergstraße 2

58513 Lüdenscheid

Germany

www.BUSCH-JAEGER.com

[email protected]om

Central sales service:

Phone: +49 (0) 2351 956-1600

Fax: +49 (0) 2351 956-1700