2. Energy Suspension
  3. 9.5160G9.5160G

Energy Suspension 9.5160G9.5160G Operating instructions

  • I have reviewed the provided instructions for the Energy Suspension Sway Bar Bushing 17145. This document provides a step-by-step guide on how to install and maintain the bushings, including how to grease them for proper function. I'm ready to answer any questions you have about the installation process or maintenance.
  • How many pumps of grease are needed for periodic maintenance?
    What should be done to the sway bar before installing new bushings?
    What should be greased before installing new bushings?
1. Remove old sway bar bushings and end links.
2. Clean and remove any rust or scale from the sway bar.
3. Grease the I.D. of the bushings and the contact area of the sway bar prior to installation.
4. Install bushings and brackets.
5. Rotate the stabilizer bar back and forth to disperse the grease throughout the bushing.
6. Install end links.
Note: For periodic maintenance, each bushing requires three full pumps of the grease gun
to insure proper lubrication.
Greaseable Sway Bar Bushing Instructions
17145 Updated 13/MAR/02 BRH
Grease
bushing
I.D.
Updated 13/DEC/01 BRH
2002 Energy Suspension. All rights reserved.2002 Energy Suspension. All rights reserved.
CC
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
1131 VIA CALLEJON, SAN CLEMENTE, CA 92673
R
Install and maintain with
your favorite grease.
1. Remove old sway bar bushings and end links.
2. Clean and remove any rust or scale from the sway bar.
3. Grease the I.D. of the bushings and the contact area of the sway bar prior to installation.
4. Install bushings and brackets.
5. Rotate the stabilizer bar back and forth to disperse the grease throughout the bushing.
6. Install end links.
Note: For periodic maintenance, each bushing requires three full pumps of the grease gun
to insure proper lubrication.
Greaseable Sway Bar Bushing Instructions
17145 Updated 13/MAR/02 BRH
Grease
bushing
I.D.
Updated 13/DEC/01 BRH
2002 Energy Suspension. All rights reserved.2002 Energy Suspension. All rights reserved.
CC
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
1131 VIA CALLEJON, SAN CLEMENTE, CA 92673
R
Install and maintain with
your favorite grease.
1. Remove old sway bar bushings and end links.
2. Clean and remove any rust or scale from the sway bar.
3. Grease the I.D. of the bushings and the contact area of the sway bar prior to installation.
4. Install bushings and brackets.
5. Rotate the stabilizer bar back and forth to disperse the grease throughout the bushing.
6. Install end links.
Note: For periodic maintenance, each bushing requires three full pumps of the grease gun
to insure proper lubrication.
Greaseable Sway Bar Bushing Instructions
17145 Updated 13/MAR/02 BRH
Grease
bushing
I.D.
Updated 13/DEC/01 BRH
2002 Energy Suspension. All rights reserved.2002 Energy Suspension. All rights reserved.
CC
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
May not be reproduced, in any form, or by any means,
without the written consent of Energy Suspension.
1131 VIA CALLEJON, SAN CLEMENTE, CA 92673
R
Install and maintain with
your favorite grease.
/