2. OPT7
  3. V1
V1

OPT7 V1 Installation guide

  • Hello! I've reviewed the Installation Guide for the OPT7 AURA Interior light strips. This document provides instructions on setting up your interior lighting, including connecting the light strips, control box, and using the remote. It also covers upgrading to the Bluetooth version. I'm ready to answer any questions you might have about the installation process or product features.
  • What is the maximum amperage for the light strips?
    What should I clean the surface with before applying the adhesive?
    What should I do with wiring?
    Can I use the control box near moisture?
INTERIOR
INSTALLATION GUIDE
LIGHT STRIPS
TM
MAIN COMPONENTS
AURA CONTROL BOX HAND HELD REMOTE
MOUNTING KIT
EXTENSION WIRES CIGARETTE LIGHTER POWER ADAPTER
Off
AUTO
On
S+
S-
M+
M-
321
EXTENSION WIRE LIGHT STRIP
INSTALLATION
Decide where to locate the light strips
and ensure wiring has enough length for
control box to be installed in desired
location.
STEP 1
Once connected, plug the control box Cigarette Power Adapter into an available
12 volt charging port.
CIGARETTE POWER ADAPTER12 VOLT CHARGING PORT
1.
2.
Connecting to more than 10 AMP will override the kit and cause early failure,
ensure it is 10AMPs or less!!
Please ensure that the LED bars or strips/control box/wiring all are mounted
in areas where will not exceed 85℃ or 185℉.
WARNING
As shown below, connect all light strips to the control box with the included exten-
sion cables.
INSTALLATION
Thoroughly clean the surface where you plan on
mounting the LED strip with rubbing / isopropyl
alcohol. (This part is essential for a rm and long
lasting placement.
A dirty surface will prevent the strip from attaching rmly.) Tear o the 3M Double-sided tape and rmly
press the LED strip to the mounting area and hold for 3 seconds.Then use the ZIp-Ties to tie all wiring
away from all moving components.
Using the included 21Key E-Z Remote, select your desired color
or pattern.
( Note: When you use this product, keep it within 10m/33ft as
much as possible )
STEP 2
STEP 3
STEP 4
Secure Control box in desired location with
Velcro or zip ties.
* CONTROL BOX NOT WATERPROOF
Ensure the control box is safely and securely
hidden from exposing elements of moisture.
Off
AUTO
On
S+
S-
M+
M-
321
Power
Automatic Color Change
Power
Speed
Mode
Dimmer
Color Selection
SoundSYNC
ON
OFF
9 Levels
3 Modes
9 Levels
9 Colors
3 Modes
1 2 3
4
7
8
5 6
1
2
3
4
7
8
5
6
DISCLAIMER
OPTIONAL UPGRADE
Upgrade your Aura Original Control Box to the Aura Pro Bluetooth Control Box. All
new AURA Pro Bluetooth is App enabled by a smartphone controller (iOS & Android
Compatible).
AURA PRO BLUETOOTH CONTROL BOX
CONNECTED
ON
WHITE
RANDOM
BRIGHTNESS
SOLID
DOOR
ASSIST
OFF
OPT7 Lighting is not liable for damages or personal injuries while installing this
product. The Installation Guide is intended as assistance to reduce setup time.
OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades,
please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modied installations or installation recommendations not specied by OPT7
Lighting will void product warranty.
/