2. OPT7 LIGHTING
  3. AURA Pro 2005-2014
AURA Pro 2005-2014

OPT7 LIGHTING AURA Pro 2005-2014 Installation guide

  • Hello! I have read the OPT7 AURA PRO BLUETOOTH DRL HALO RGB Installation Guide for Ford Mustang 05-14. This document details the components included, such as the light strips, control box, and mounting hardware. I'm ready to answer any questions you might have about installing your light kit. The guide also emphasizes important considerations like maximum amperage and waterproofing the connectors.
  • What is the maximum amperage for this kit?
    Where should LED bars/strips/control box/wiring be mounted?
    Are the LED connectors waterproof?
AURA PRO
TM
INSTALLATION GUIDE
BLUETOOTH DRL HALO RGB
COMPONENTS
FORD MUSTANG 05-14
AURA BLUETOOTH CONTROL BOX
SINGLE COLOR LIGHT STRIPS
HARDWIRE POWER HARNESSEXTENSION WIRES
ZIPTIES
Y-SPLITTERS
MOUNTING KIT
INSTALLATION
Open the hood.
Wrap the LED strip into a circle shape and firmly
press into place inside of the intake hole to secure.
Run the wires along the front brace and connect
to the control box.
Test for function.
Attach the strip as pictured as an alternate
method of install.
Remove the plastic covers on the right and left
side of the engine bay.
STEP 1 STEP 4
STEP 2
STEP 6STEP 3
AND/OR
NOT
WATERPROOF
STARTER
ENGINE
BLOCK
HARDWIRE
POWER
HARNESS
Connect the power wire harness to your
vehicle battery.
STEP 5
INSTALLATION
OPTIONAL: 2 x 12'' Strips can be used to enhance your front grille or use as spares.
Heat Shrink Tube
1
2
EXAMPLES
* IMPORTANT:
The LED connectors are not waterproof.
You will need to use heat shrink tube
(not included) or electrical tape around
the LED connectors to ensure the
longevity of the lighting kit.
AUXILIARY WIRE EXTENSION WIRE
FUSE
1.
2.
Connecting to more than 10 AMP will override the kit and cause
early failure, ensure it is 10AMPs or less!!
Please ensure that the LED bars or strips/control box/wiring all are
mounted in areas where will not exceed 85℃ or 185℉.
WARNING
Colors
Modes
Door Assist
Support
Ability to control up to
4 devices at once
-
-
-
-
-
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 CONNECT APP
DISCLAIMER
QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
• App iOS (12+) available on App Store
• Android (6 +) available on Google Play
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
/