OPT7 LIGHTING AURA LED Double Row Interior Lighting Kit Installation guide

Type
Installation guide

OPT7 LIGHTING AURA LED Double Row Interior Lighting Kit is a customizable lighting system designed to enhance the interior of your vehicle. With its double row of LED strips, this kit provides bright and even illumination, allowing you to choose from various colors and patterns to suit your preference. Easily controlled with the included E-Z Remote, you can select single-color strobe, multi-color fade, multi-color cycle, and color selection modes. Additionally, the kit features an auxiliary wire for connecting to a door or dome light, enabling synchronized lighting effects.

OPT7 LIGHTING AURA LED Double Row Interior Lighting Kit is a customizable lighting system designed to enhance the interior of your vehicle. With its double row of LED strips, this kit provides bright and even illumination, allowing you to choose from various colors and patterns to suit your preference. Easily controlled with the included E-Z Remote, you can select single-color strobe, multi-color fade, multi-color cycle, and color selection modes. Additionally, the kit features an auxiliary wire for connecting to a door or dome light, enabling synchronized lighting effects.

DOUBLE ROW
INTERIOR
INSTALLATION GUIDE
TM
MAIN COMPONENTS
LED STRIPS
AURA CONTROL BOX REMOTE
TM
MOUNTING KIT
EXTENSION WIRES CIGARETTE LIGHTER POWER ADAPTER
INSTALLATION
Decide where to locate the light
strips and ensure wiring has enough
length for control box to be installed
in desired location.
STEP 1
TM
TM
Once connected, plug the control box Cigarette Power Adapter into an available
12 volt charging port.
CIGARETTE POWER ADAPTER12 VOLT CHARGING PORT
1.
2.
Connecting to more than 10 AMP will override the kit and cause early failure,
ensure it is 10AMPs or less!!
Please ensure that the LED bars or strips/control box/wiring all are mounted
in areas where will not exceed 85 or 185.
WARNING
As shown below, connect all light strips to the control box with the included
extension cables.
AUXILIARY WIRE EXTENSION WIRE
INSTALLATION
Use the zip ties to tie all wiring
away from all moving components.
Using the included E-Z Remote, select your desired color or pattern.
STEP 2
STEP 3
STEP 4
TM
Dimmer
Color Selection
Multi-Color Fade
Multi-Color Cycle
SoundSync™
Press multiple times to change color
Adjust speed with "Dimmer" buttons
Adjust speed with "Dimmer" buttons
Adjust speed with "Dimmer" buttons
Single-Color Strobe
On / O
Press multiple times to change color
To adjust the sensitivity, please visit
www.OPT-7.com
Secure Control box in desired
location with Velcro or zip ties.
* CONTROL BOX NOT WATERPROOF
Ensure the control box is safely and
securely hidden from exposing
elements of moisture.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
OPTIONAL UPGRADE
Upgrade your Aura Original
Control Box to the Aura Pro
Bluetooth Control Box.
All new AURA Pro Bluetooth is
App enabled by a smartphone
controller (iOS & Android
Compatible).
AURA PRO
BLUETOOTH CONTROL BOX
CONNECTED
ON
WHITE
RANDOM
BRIGHTNESS
SOLID
DOOR
ASSIST
OFF
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this
product. The Installation Guide is intended as assistance to reduce setup time.
OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

OPT7 LIGHTING AURA LED Double Row Interior Lighting Kit Installation guide

Type
Installation guide

OPT7 LIGHTING AURA LED Double Row Interior Lighting Kit is a customizable lighting system designed to enhance the interior of your vehicle. With its double row of LED strips, this kit provides bright and even illumination, allowing you to choose from various colors and patterns to suit your preference. Easily controlled with the included E-Z Remote, you can select single-color strobe, multi-color fade, multi-color cycle, and color selection modes. Additionally, the kit features an auxiliary wire for connecting to a door or dome light, enabling synchronized lighting effects.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI