OPT7 Aura Pro Installation guide

Aura Pro
Brand
OPT7
Model
Aura Pro
Type
Installation guide

OPT7 Aura Pro is an RGB lighting system designed to enhance the look of your Dodge Challenger. It comes with Bluetooth connectivity, allowing you to control the colors, modes, and door assist synchronization through the OPT7 CONNECT app. The app is available for iOS and Android devices and supports up to 4 devices simultaneously. The Aura Pro features an easy installation process, with detailed instructions provided in the manual. It includes various mounting options to suit your preferences. The lighting system is engineered to withstand temperatures up to 185 degrees Fahrenheit.

OPT7 Aura Pro is an RGB lighting system designed to enhance the look of your Dodge Challenger. It comes with Bluetooth connectivity, allowing you to control the colors, modes, and door assist synchronization through the OPT7 CONNECT app. The app is available for iOS and Android devices and supports up to 4 devices simultaneously. The Aura Pro features an easy installation process, with detailed instructions provided in the manual. It includes various mounting options to suit your preferences. The lighting system is engineered to withstand temperatures up to 185 degrees Fahrenheit.

AURA PRO
TM
INSTALLATION GUIDE
BLUETOOTH DRL HALO RGB
DODGE CHALLENGER 08-22
COMPONENTS
AURA BLUETOOTH CONTROL BOX
LIGHT STRIPS
HARDWIRE POWER HARNESS
MOUNTING KIT
EXTENSION WIRES
ZIPTIES
FUSE TAPS
Y-SPLITTERS
CIGARETTE LIGHTER POWER SUPPLY
Open the hood.
INSTALLATION
Wrap the LED strip into a circle shape
and firmly press into place inside of
the intake hole to secure.
Run the wires along the front brace and
connect to the control box.
Connect the positive wire to a constant
(always on) or accessory (only when the
car is on) circuit in the fuse box by using
an included fuse tap.
Connect the negative wire to a ground
source, such as the one circled in
the picture.
Test for function.
Attach the strip as pictured as an
alternate method of install.
Remove the plastic covers on the right
and left side of the engine bay.
STEP 1 STEP 4
STEP 2 STEP 5
STEP 6
STEP 7STEP 3
AND/OR
CONTROL BOX
WIRING
CONTROL BOX
WIRING
Heat Shrink Tube
1
2
OPTION A
OPTION B
AUXILIARY WIRE EXTENSION WIRE
AUXILIARY WIRE EXTENSION WIRE
FUSE
BOX
GROUND
(+)
(-)
INSTALLATION
* IMPORTANT:
The LED connectors are not waterproof.
You will need to use HEAT SHRINK TUBE
(not included) or ELECTRICAL TAPE
around the LED connectors to ensure
the longevity of the lighting kit.
WARNING: Please ensure that the led strips/control box/wiring all are mounted
in areas of the engine bay that will not exceed 85C or 185F.
Colors
Modes
Door Assist
Support
Ability to control up to
4 devices at once
-
-
-
-
-
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 CONNECT APP
DISCLAIMER
QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
• App iOS (12+) available on App Store
• Android (6 +) available on Google Play
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

OPT7 Aura Pro Installation guide

Aura Pro
Brand
OPT7
Model
Aura Pro
Type
Installation guide

OPT7 Aura Pro is an RGB lighting system designed to enhance the look of your Dodge Challenger. It comes with Bluetooth connectivity, allowing you to control the colors, modes, and door assist synchronization through the OPT7 CONNECT app. The app is available for iOS and Android devices and supports up to 4 devices simultaneously. The Aura Pro features an easy installation process, with detailed instructions provided in the manual. It includes various mounting options to suit your preferences. The lighting system is engineered to withstand temperatures up to 185 degrees Fahrenheit.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents