2. OPT7
  3. Aura Pro
Aura Pro

OPT7 Aura Pro Installation guide

  • I've reviewed the provided installation guide for the OPT7 AURA PRO Bluetooth DRL Halo RGB light strips designed for the Dodge Challenger 08-22. This guide covers the installation process including mounting, wiring, and testing. I'm familiar with its contents, such as component details, steps for installation and safety instructions and I'm ready to answer any questions you may have about the installation of this product.
  • What car model is this product designed for?
    How can I control the lights?
    Do the LED connectors need additional protection?
    What is the maximum current this light strip can handle?
AURA PRO
TM
INSTALLATION GUIDE
BLUETOOTH DRL HALO RGB
DODGE CHALLENGER 08-22
COMPONENTS
AURA BLUETOOTH CONTROL BOX
SINGLE COLOR LIGHT STRIPS
HARDWIRE POWER HARNESSEXTENSION WIRES
ZIPTIES
Y-SPLITTERS
MOUNTING KIT
Open the hood.
INSTALLATION
Wrap the LED strip into a circle shape
and firmly press into place inside of
the intake hole to secure.
Run the wires along the front brace and
connect to the control box.
Attach the strip as pictured as an
alternate method of install.
Remove the plastic covers on the right
and left side of the engine bay.
STEP 1 STEP 4
STEP 2
STEP 3
AND/OR
STARTER
ENGINE
BLOCK
HARDWIRE
POWER
HARNESS
Connect the power wire harness to
your vehicle battery.
Test for function.
STEP 6
STEP 5
Heat Shrink Tube
1
2
EXAMPLES
INSTALLATION
* IMPORTANT:
The LED connectors are not waterproof.
You will need to use heat shrink tube
(not included) or electrical tape around
the LED connectors to ensure the
longevity of the lighting kit.
AUXILIARY WIRE EXTENSION WIRE
FUSE
1.
2.
Connecting to more than 10 AMP will override the kit and cause
early failure, ensure it is 10AMPs or less!!
Please ensure that the LED bars or strips/control box/wiring all are
mounted in areas where will not exceed 85℃ or 185℉.
WARNING
Colors
Modes
Door Assist
Support
Ability to control up to
4 devices at once
-
-
-
-
-
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 CONNECT APP
DISCLAIMER
QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
• App iOS (12+) available on App Store
• Android (6 +) available on Google Play
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
/