Aura Running Board Installation guide

Running Board
Aura
Brand
Aura
Model
Running Board
Type
Installation guide

Aura Running Board: Illuminate your vehicle with customizable LED lights that elevate your driving experience. With a variety of color and pattern options, you can personalize your vehicle's look and enhance its visibility. The kit includes rigid light bars, a control box, and a handheld remote, allowing for easy installation and control. The multi-color fade, cycle, and strobe patterns add a dynamic touch to your vehicle, while the dimmer function lets you adjust the brightness to your liking.

Aura Running Board: Illuminate your vehicle with customizable LED lights that elevate your driving experience. With a variety of color and pattern options, you can personalize your vehicle's look and enhance its visibility. The kit includes rigid light bars, a control box, and a handheld remote, allowing for easy installation and control. The multi-color fade, cycle, and strobe patterns add a dynamic touch to your vehicle, while the dimmer function lets you adjust the brightness to your liking.

MAIN COMPONENTS
RUNNING BOARD
INSTALLATION GUIDE
TM
AURA CONTROL BOX
HAND
HELD REMOTE
TM
RIGID LIGHT BARS
HARDWIRE POWER HARNESS
FUSE TAPS
MOUNTING KIT
INCLUDES -
WIRE MOUNTS, SELF-TAPPING
SCREWS, BOOSTER, VELCRO, ZIP TIES
ADHESIVE BOOSTER
CIGARETTE LIGHTER POWER SUPPLY
INSTALLATION
STEP 1
Decide where to locate the control box and
ensure wiring has enough length for light
bars to be installed in desired location.
IMPORTANT:
The control box must be installed inside the vehicle
as it is not waterproof. Avoid installation areas of
the engine bay + heated surfaces.
AUXILIARY WIRE
TM
TM
POWER SOURCE HARDWIRE HARNESS
TM
FUSE TAP
FUSE
BOX GROUND
CIGARETTE POWER ADAPTER12 VOLT CHARGING PORT
or connect the positive wire to the fuse tap and connector the open negative wire to a
ground (any metal surface). Then plug the fuse tap into the 10amp switched fuse.
IMPORTANT: Connecting to more then 10amp will override the kit and cause early
failure, ensure it is 10amps or less!
WARNING: Please ensure that the led bars or strips/control box/wiring all are
mounted in areas where will not exceed 85C or 185F.
Once connected, plug the control box Cigarette Power Adapter into an available 12 volt charging port.
IMPORTANT:
The extension wires are on the led bar. Lay
out the bars to measure the length prior to
install for a successful installation.
2 x 48” LED Bar + 8ft extension wire
1 x 36” LED Bar + 18ft extension wire
1 x 36” LED Bar + 8ft extension wire
Heat Shrink Tube
1
2
STEP 2
TM
INSTALLATION
STEP 3
Mount brackets to secure the
light bars first. Secure the light
bars using the zip ties to tie all
the wiring away from the moving
components.
Using the included E-Z Remote, select your desired color or pattern.
STEP 4
Dimmer
Color Selection
Multi-Color Fade
Multi-Color Cycle
SoundSync™
Press multiple times to change color
Adjust speed with "Dimmer" buttons
Adjust speed with "Dimmer" buttons
Adjust speed with "Dimmer" buttons
Single-Color Strobe
On / O
Press multiple times to change color
To adjust the sensitivity, please visit
www.OPT-7.com
Secure Control box in desired
location with Velcro or zipties.
* CONTROL BOX NOT WATERPROOF
Ensure the control box is safely and
securely hidden from exposing
elements of moisture.
* IMPORTANT:
The LED connectors are not waterproof.
You will need to use HEAT SHRINK TUBE
(not included) or ELECTRICAL TAPE
around the LED connectors to ensure
the longevity of the lighting kit.
OPTIONAL UPGRADE
Upgrade your Aura Original
Control Box to the Aura Pro
Bluetooth Control Box.
All new AURA Pro Bluetooth is
App enabled by a smartphone
controller (iOS & Android
Compatible).
AURA PRO
BLUETOOTH CONTROL BOX
CONNECTED
ON
WHITE
RANDOM
BRIGHTNESS
SOLID
DOOR
ASSIST
OFF
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Aura Running Board Installation guide

Running Board
Aura
Brand
Aura
Model
Running Board
Type
Installation guide

Aura Running Board: Illuminate your vehicle with customizable LED lights that elevate your driving experience. With a variety of color and pattern options, you can personalize your vehicle's look and enhance its visibility. The kit includes rigid light bars, a control box, and a handheld remote, allowing for easy installation and control. The multi-color fade, cycle, and strobe patterns add a dynamic touch to your vehicle, while the dimmer function lets you adjust the brightness to your liking.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents