AuraPro

OPT7 LIGHTING AuraPro Installation guide

  • Hello! I'm ready to assist you with your questions about the OPT7 AURA PRO BLUETOOTH DRL HALO RGB light strips. I've reviewed the installation guide and understand the components, installation steps, and wiring options. I'm familiar with the need to waterproof the connectors and using the app for control. Feel free to ask me anything!
  • What is included in the package?
    Are the LED connectors waterproof?
    What kind of power circuit can be used?
    Is there an app to control the lighting?
AURA PRO
TM
INSTALLATION GUIDE
BLUETOOTH DRL HALO RGB
COMPONENTS
AURA BLUETOOTH CONTROL BOX
LIGHT STRIPS
HARDWIRE POWER HARNESS
MOUNTING KIT
EXTENSION WIRES
ZIPTIES
FUSE TAPS
Y-SPLITTERS
CIGARETTE LIGHTER POWER SUPPLY
FORD MUSTANG 05-14
INSTALLATION
Open the hood.
Wrap the LED strip into a circle shape and firmly
press into place inside of the intake hole to secure.
Run the wires along the front brace and connect
to the control box.
Connect the positive wire to a constant (always
on) or accessory (only when the car is on) circuit
in the fuse box by using an included fuse tap.
Connect the negative wire to a ground source,
such as the one circled in the picture.
Test for function.
Attach the strip as pictured as an alternate
method of install.
Remove the plastic covers on the right and left
side of the engine bay.
STEP 1 STEP 4
STEP 2 STEP 5
STEP 7STEP 3
AND/OR
CONTROL BOX
WIRING
CONTROL BOX
WIRING
STEP 6
NOT
WATERPROOF
Heat Shrink Tube
1
2
OPTION A
OPTION B
AUXILIARY WIRE EXTENSION WIRE
AUXILIARY WIRE EXTENSION WIRE
FUSE
BOX
GROUND
(+)
(-)
* IMPORTANT:
The LED connectors are not waterproof.
You will need to use HEAT SHRINK TUBE
(not included) or ELECTRICAL TAPE
around the LED connectors to ensure
the longevity of the lighting kit.
INSTALLATION
WARNING: Please ensure that the led strips/control box/wiring all are mounted
in areas of the engine bay that will not exceed 85C or 185F.
OPTIONAL: 2 x 12'' Strips can be used to enhance your front grille or use as spares.
Colors
Modes
Door Assist
Support
Ability to control up to
4 devices at once
-
-
-
-
-
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 CONNECT APP
DISCLAIMER
QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
• App iOS (12+) available on App Store
• Android (6 +) available on Google Play
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
/