2. Oxford Garden
  3. Oxford 67″ Round Dining Table

Oxford Garden Oxford 67″ Round Dining Table Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Oxford Garden 67" Round dining table. This document outlines the components needed and provides steps for assembling the table. I can help you with questions about the parts, hardware, or any specific aspects of the assembly process.
  • What are the main component pieces of the dining table?
    What hardware is included for assembly?
    What should I do if I place the furniture on concrete or tile?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
67” ROUND DINING TABLE
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
FINISHING ITEMS
Medium Grit Sandpaper
If the furniture is going to be placed on a concrete or tile patio, it should first be rinsed well to remove
the sawdust that may cause some staining.
Table Top Assembly
Quantity: 1
Corner Posts
Quantity: 4
2
Pedestal Base
Quantity: 1
Parasol Hole Cap
Quantity: 1
34
A
Metal Washers
Quantity: 8
B
Hex Nuts
Quantity: 8
C
Machine Bolts
Quantity: 5
Barrel Nuts
Quantity: 4
D
Allen Wrench
Quantity: 2
E
Hex Head Wrench
Quantity: 1
F
Ver. 06.30.20
How to align barrel nuts and bolts
Insert a guiding bolt into the end of a
barrel nut
Align the barrel nut inside of the compo-
nent with the bolt used to connect the
components
Once the component bolt is aligned and
threaded, simply pull the guiding bolt
from the end of the barrel nut.
/