Oxford Garden Travira Modular Host Stand Topper Assembly Instructions

Brand
Oxford Garden
Model
Travira Modular Host Stand Topper
Type
Assembly Instructions
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
TRAVIRA MODULAR HOST STAND TOPPER
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
Travira Modular Host Stand Topper
Quantity: 1
Short Bolt
Quantity: 4
A
Allen Wrench
Quantity: 1
B
Ver. 06.30.20
STEP 2
Place the host stand topper on top of the Modular
Valet Base. Making sure it is facing the correct direction.
Align the bottom mounting bolt holes with the base’s top
4 insert nuts.
Ver. 2019.11.01
STEP 3
Take the 4 bolts out of the bag. Using the provided
allen wrench , bolt the host stand topper tightly to the
base.
INSTRUCTIONS
STEP 1
It is recommended to first unscrew and remove the
Tekwood panel by removing 4 bolts from the topper
and set aside.
Note: This is so it is easier to attach the topper to stand.
Front View Back View
STEP 4
Align the Tekwood panel back on the aluminum stand
topper and bolt on using the 4 bolts on each side that
were previously removed.
A
B
A
A
B
B
A
B
A
B
  • Page 1 1
  • Page 2 2

Oxford Garden Travira Modular Host Stand Topper Assembly Instructions

Brand
Oxford Garden
Model
Travira Modular Host Stand Topper
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents