2. Office
  3. Office furniture
  4. Computer desks
  5. Oxford Garden
  6. Siena Side Table

Oxford Garden Siena Side Table Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the SIENA Side Table. This document outlines the necessary steps and components to put together the table, including the legs, washers, and hex nuts. I am ready to help you with any questions you may have.
  • What are the main components of the side table?
    What hardware is included for assembly?
    What should I do before placing the table on concrete or tile?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
SIENA SIDE TABLE
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
FINISHING ITEMS
Medium Grit Sandpaper
NOTE: If the furniture is going to be placed on a concrete or tile patio, it should first be rinsed well
to remove the sawdust that may cause some staining.
Table Top
Quantity: 1
Leg
Quantity: 4
A
Washers
Quantity: 4
B
Hex Nuts
Quantity: 4
C
Hex Head Wrench
Quantity: 1
Ver. 06.30.20
STEP 2
Place the bolt of one leg through the holes in the
corner brace of table top . Slide one metal washer
onto the bolt. Screw one hexagon nut onto the bolt
and tighten with wrench (supplied). Repeat for other
three legs.
INSTRUCTIONS
STEP 1
On a clean flat surface, lay table top upside down.
Ver. 2019.03.18
STEP 3
Turn table upright and enjoy.
2
A
B
2
AB
2
/