2. Oxford Garden
  3. Tulle 45″ Square Table

Oxford Garden Tulle 45″ Square Table Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the OXFORD & GARDEN TULLE 45" SQUARE dining table. This document outlines the necessary components, hardware, and step-by-step process for assembling your new table. It also includes some finishing recommendations, such as rinsing the table before use on concrete or tile and using medium grit sandpaper to remove any marks or stains. I am ready to help you with any questions you may have about assembling this table.
  • What components are included?
    What hardware is included?
    What should be done before placing the table on a concrete or tile patio?
    What grit sandpaper is recommended for finishing?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 888.892.2670 f. 502.719.8888 oxfordgarden.com
TULLE ” SQUARE DINING TABLE
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
1
Table Top Assembly
Quantity: 1
2
Corner Posts
Quantity: 4
Washers
Quantity: 8
A
Hex Nuts
Quantity: 8
B
Ver. 11.29.22
3
Parasol Hole Cap
Quantity: 1
Hex Head Wrench
Quantity: 1
C
FINISHING ITEMS
Medium Grit Sandpaper
NOTE: If the furniture is going to be placed on a
concrete or tile patio, it should first be rinsed well to
remove the sawdust that may cause some staining.
NOTE: Hardware pack may contain more hardware than what is needed to assemble.
AB
STEP 2
Insert the threaded rods on one corner post
into holes located on one corner of table top.
INSTRUCTIONS
STEP 1
On a clean flat surface, lay table top upside down.
Secure corner post to the table top using a metal washer
and hex nut .
STEP 3
1
1
1
STEP 3 (Detail)
2
2
1
2
Ver. 11.29.22
1
2
A
B
Repeat steps 2 and 3 for the remaining 3 corner posts.
STEP 4 STEP 5
Carefully turn the assembled dinning table in an
upright position. Using a medium grit sandpaper,
quickly sand off any marks or stains. Sand to smooth
off areas around the dowel pins. Enjoy!
A
B
/