Panasonic ET-PKF110S Datasheet

Panasonic
Brand
Panasonic
Model
ET-PKF110S
Category
Projector mounts
Type
Datasheet

Panasonic ET-PKF110S is a ceiling mount bracket designed for low ceilings. It is compatible with PT-FW430 series or other Panasonic projectors. The bracket allows for vertical correction angle of +5°, -15°, horizontal slant correction angle of ±10°, and horizontal turn correction angle of ±5°. The dimensions of the bracket are 313 × 93 × 222 mm (12-5/16˝ × 3-21/32˝ × 8-3/4˝) and it weighs approximately 1.5 kg (3.3 lbs). The package includes an attachment plate, projector mount bracket, washer-fitted bolts (M4 × 10), wire rope for projector mount bracket, and wire rope for projector unit.

Panasonic ET-PKF110S is a ceiling mount bracket designed for low ceilings. It is compatible with PT-FW430 series or other Panasonic projectors. The bracket allows for vertical correction angle of +5°, -15°, horizontal slant correction angle of ±10°, and horizontal turn correction angle of ±5°. The dimensions of the bracket are 313 × 93 × 222 mm (12-5/16˝ × 3-21/32˝ × 8-3/4˝) and it weighs approximately 1.5 kg (3.3 lbs). The package includes an attachment plate, projector mount bracket, washer-fitted bolts (M4 × 10), wire rope for projector mount bracket, and wire rope for projector unit.

S P E C F I L E
Ceiling mount bracket for low ceilings
SFL11A004
ET-PKF110S
As of March 2011 1 / 1
Weights and dimensions shown are approximate. Specifications subject to change without notice.
1
0
°
10
°
1
5
°
70
Attachement
plate
65 (2-9/16)
(2-3/4)
25
(31/32)
432
(17)
184
(7-1/4
9.5 (3/8)
13 (1/2)*
3-∅ 9.5 (∅ 3/8)
20 (2-9/16)
From center of
rotation to center
of lens
*
∅8.5
(∅ 11/ 32)
150 (5-29/32)
160 (6-5/16 )
153
(6 -1/32)
207
(8-5/32)
140 (5-1/2)
114 (4-1/2)
130 (5-1/8)
104 (4-3/32)
5°
Projector
Specifications
Vertical correction angle: +5°, -15°
Horizontal slant correction angle: ±10°
Horizontal turn correction angle: ±5°
Dimensions (W × H × D): 313 × 93 × 222 mm
(12-5/16˝ × 3-21/32˝ × 8-3/4˝)
Weight: Approx. 1.5 kg* (3.3 lbs*)
Attachment plateIllustration shows the bracket attached to a projector.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . . . . 1
Washer-fitted bolts (M4 × 10) . . . . . . . . . . . . . . . 4
Wire rope for projector mount bracket . . . . . . . . 1
Wire rope for projector unit . . . . . . . . . . . . . . . . 1
*
A
verage value. May differ depending on models.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is used when mounting a PT-FW430 series or other Panasonic projector to low ceilings.
C a u t i o n :
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
  • Page 1 1

Panasonic ET-PKF110S Datasheet

Panasonic
Brand
Panasonic
Model
ET-PKF110S
Category
Projector mounts
Type
Datasheet

Panasonic ET-PKF110S is a ceiling mount bracket designed for low ceilings. It is compatible with PT-FW430 series or other Panasonic projectors. The bracket allows for vertical correction angle of +5°, -15°, horizontal slant correction angle of ±10°, and horizontal turn correction angle of ±5°. The dimensions of the bracket are 313 × 93 × 222 mm (12-5/16˝ × 3-21/32˝ × 8-3/4˝) and it weighs approximately 1.5 kg (3.3 lbs). The package includes an attachment plate, projector mount bracket, washer-fitted bolts (M4 × 10), wire rope for projector mount bracket, and wire rope for projector unit.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents